1 Here is the step-by-step to boot U-Boot on phytium durian board.
5 > make durian_defconfig
8 Get the prebuild binary about BPF
9 =================================
11 > git clone https://github.com/phytium-durian/bpf.git
16 > cp ../u-boot/u-boot.bin ./
19 The fip-all.bin is the final image.
21 Flash the image into the spi nor-flash
22 ======================================
23 Any spi nor-flash and appropriate tool can be used to flash.
24 For example, we choose the S25FL256 chip that produced from
25 SPANSION company and EZP_XPro V1.2.
27 Reset the board, you can get U-Boot log message from boot console:
34 Jump to entrypoint: 0x500000
36 U-Boot 2019.10-00594-g9ccc1b17ea-dirty (Oct 18 2019 - 00:17:09 +0800)
42 scanning bus for devices...
43 Target spinup took 0 ms.
47 AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
48 flags: 64bit ncq led only pmp fbss pio slum part sxs
49 Device 0: (0:0) Vendor: ATA Prod.: ST1000DM010-2EP1 Rev: CC43
51 Capacity: 953869.7 MB = 931.5 GB (1953525168 x 512)
56 AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
57 flags: 64bit ncq led only pmp fbss pio slum part sxs
58 Hit any key to stop autoboot: 0