T210: P2571: Enable SD-card power via PMIC LDO2
[oweals/u-boot.git] / board / nvidia / p2571 / p2571.c
1 /*
2  * (C) Copyright 2013-2015
3  * NVIDIA Corporation <www.nvidia.com>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #include <common.h>
9 #include <i2c.h>
10 #include <asm/arch/gpio.h>
11 #include <asm/arch/pinmux.h>
12 #include "max77620_init.h"
13 #include "pinmux-config-p2571.h"
14
15 void pin_mux_mmc(void)
16 {
17         struct udevice *dev;
18         uchar val;
19         int ret;
20
21         /* Turn on MAX77620 LDO2 to 3.3V for SD card power */
22         debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
23         ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
24         if (ret) {
25                 printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
26                 return;
27         }
28         /* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
29         val = 0xF2;
30         ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1);
31         if (ret)
32                 printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
33 }
34
35 /*
36  * Routine: pinmux_init
37  * Description: Do individual peripheral pinmux configs
38  */
39 void pinmux_init(void)
40 {
41         pinmux_clear_tristate_input_clamping();
42
43         gpio_config_table(p2571_gpio_inits,
44                           ARRAY_SIZE(p2571_gpio_inits));
45
46         pinmux_config_pingrp_table(p2571_pingrps,
47                                    ARRAY_SIZE(p2571_pingrps));
48
49         pinmux_config_drvgrp_table(p2571_drvgrps,
50                                    ARRAY_SIZE(p2571_drvgrps));
51 }