2 * SPDX-License-Identifier: GPL-2.0 IBM-pibs
4 /*-----------------------------------------------------------------------------
5 * Function: ext_bus_cntlr_init
6 * Description: Initializes the External Bus Controller for the external
7 * peripherals. IMPORTANT: For pass1 this code must run from
8 * cache since you can not reliably change a peripheral banks
9 * timing register (pbxap) while running code from that bank.
10 * For ex., since we are running from ROM on bank 0, we can NOT
11 * execute the code that modifies bank 0 timings from ROM, so
12 * we run it from cache.
13 * Bank 0 - Flash or Multi Purpose Socket
14 * Bank 1 - Multi Purpose Socket or Flash
19 * Bank 6 - used to switch on the 12V for the Multipurpose socket
20 * Bank 7 - Config Register
21 *-----------------------------------------------------------------------------*/
22 #define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
24 #include <configs/PIP405.h>
25 #include <ppc_asm.tmpl>
28 #include <asm/cache.h>
30 #include <asm/ppc4xx.h>
33 .globl ext_bus_cntlr_init
35 mflr r4 /* save link register */
36 mfdcr r3,CPC0_PSR /* get strapping reg */
37 andi. r0, r3, PSR_ROM_LOC /* mask out irrelevant bits */
38 bnelr /* jump back if PCI boot */
42 mflr r3 /* get address of ..getAddr */
43 mtlr r4 /* restore link register */
44 addi r4,0,14 /* set ctr to 14; used to prefetch */
45 mtctr r4 /* 14 cache lines to fit this function */
46 /* in cache (gives us 8x14=112 instrctns) */
48 icbt r0,r3 /* prefetch cache line for addr in r3 */
49 addi r3,r3,32 /* move to next cache line */
50 bdnz ..ebcloop /* continue for 14 cache lines */
52 /*-------------------------------------------------------------------
53 * Delay to ensure all accesses to ROM are complete before changing
55 *------------------------------------------------------------------- */
60 bdnz ..spinlp /* spin loop */
62 /*-----------------------------------------------------------------------
64 *----------------------------------------------------------------------- */
69 andi. r0, r4, 0x2000 /* mask out irrelevant bits */
70 beq 0f /* jump if 8 bit bus width */
72 /* setup 16 bit things
73 *-----------------------------------------------------------------------
74 * Memory Bank 0 (16 Bit Flash) initialization
75 *---------------------------------------------------------------------- */
79 addis r4,0,(FLASH_AP_B)@h
80 ori r4,r4,(FLASH_AP_B)@l
85 /* BS=0x010(4MB),BU=0x3(R/W), */
86 addis r4,0,(FLASH_CR_B)@h
87 ori r4,r4,(FLASH_CR_B)@l
93 /*-----------------------------------------------------------------------
94 * Memory Bank 0 Multi Purpose Socket initialization
95 *----------------------------------------------------------------------- */
96 /* 0x7F8FFE80 slowest boot */
99 addis r4,0,(MPS_AP_B)@h
100 ori r4,r4,(MPS_AP_B)@l
101 mtdcr EBC0_CFGDATA,r4
104 mtdcr EBC0_CFGADDR,r4
105 /* BS=0x010(4MB),BU=0x3(R/W), */
106 addis r4,0,(MPS_CR_B)@h
107 ori r4,r4,(MPS_CR_B)@l
108 mtdcr EBC0_CFGDATA,r4
112 /*-----------------------------------------------------------------------
113 * Memory Bank 2-3-4-5-6 (not used) initialization
114 *-----------------------------------------------------------------------*/
116 mtdcr EBC0_CFGADDR,r4
119 mtdcr EBC0_CFGDATA,r4
122 mtdcr EBC0_CFGADDR,r4
125 mtdcr EBC0_CFGDATA,r4
128 mtdcr EBC0_CFGADDR,r4
131 mtdcr EBC0_CFGDATA,r4
134 mtdcr EBC0_CFGADDR,r4
137 mtdcr EBC0_CFGDATA,r4
140 mtdcr EBC0_CFGADDR,r4
143 mtdcr EBC0_CFGDATA,r4
146 mtdcr EBC0_CFGADDR,r4
149 mtdcr EBC0_CFGDATA,r4
152 mtdcr EBC0_CFGADDR,r4
155 mtdcr EBC0_CFGDATA,r4
156 nop /* pass2 DCR errata #8 */
159 #if defined(CONFIG_BOOT_PCI)
160 .section .bootpg,"ax"
162 /*******************************************
166 /* first handle errata #68 / PCI_18 */
167 iccci r0, r0 /* invalidate I-cache */
169 mticcr r31 /* ICCR = 0 (all uncachable) */
172 mfccr0 r28 /* set CCR0[24] = 1 */
176 /* setup PMM0MA (0xEF400004) and PMM0PCIHA (0xEF40000C) */
178 addi r28, r28, 0x0004
179 stw r31, 0x0C(r28) /* clear PMM0PCIHA */
180 lis r29, 0xFFF8 /* open 512 kByte */
181 addi r29, r29, 0x0001/* and enable this region */
182 stwbrx r29, r0, r28 /* write PMM0MA */
184 lis r28, 0xEEC0 /* address of PCIC0_CFGADDR */
185 addi r29, r28, 4 /* add 4 to r29 -> PCIC0_CFGDATA */
187 lis r31, 0x8000 /* set en bit bus 0 */
188 ori r31, r31, 0x304C/* device 6 func 0 reg 4C (XBCS register) */
189 stwbrx r31, r0, r28 /* write it */
191 lwbrx r31, r0, r29 /* load XBCS register */
192 oris r31, r31, 0x02C4/* clear BIOSCS WPE, set lower, extended and 1M extended BIOS enable */
193 stwbrx r31, r0, r29 /* write back XBCS register */
197 b _start /* normal start */