board/gateworks/gw_ventana/gw_ventana_spl.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2014 Gateworks Corporation
   4  * Author: Tim Harvey <tharvey@gateworks.com>
   5  */
   6
   7 #include <common.h>
   8 #include <asm/io.h>
   9 #include <asm/arch/crm_regs.h>
  10 #include <asm/arch/mx6-ddr.h>
  11 #include <asm/arch/mx6-pins.h>
  12 #include <asm/arch/sys_proto.h>
  13 #include <asm/mach-imx/boot_mode.h>
  14 #include <asm/mach-imx/iomux-v3.h>
  15 #include <asm/mach-imx/mxc_i2c.h>
  16 #include <environment.h>
  17 #include <i2c.h>
  18 #include <spl.h>
  19
  20 #include "gsc.h"
  21 #include "common.h"
  22
  23 #define RTT_NOM_120OHM /* use 120ohm Rtt_nom vs 60ohm (lower power) */
  24 #define GSC_EEPROM_DDR_SIZE     0x2B    /* enum (512,1024,2048) MB */
  25 #define GSC_EEPROM_DDR_WIDTH    0x2D    /* enum (32,64) bit */
  26
  27 /* configure MX6Q/DUAL mmdc DDR io registers */
  28 struct mx6dq_iomux_ddr_regs mx6dq_ddr_ioregs = {
  29         /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */
  30         .dram_sdclk_0 = 0x00020030,
  31         .dram_sdclk_1 = 0x00020030,
  32         .dram_cas = 0x00020030,
  33         .dram_ras = 0x00020030,
  34         .dram_reset = 0x00020030,
  35         /* SDCKE[0:1]: 100k pull-up */
  36         .dram_sdcke0 = 0x00003000,
  37         .dram_sdcke1 = 0x00003000,
  38         /* SDBA2: pull-up disabled */
  39         .dram_sdba2 = 0x00000000,
  40         /* SDODT[0:1]: 100k pull-up, 40 ohm */
  41         .dram_sdodt0 = 0x00003030,
  42         .dram_sdodt1 = 0x00003030,
  43         /* SDQS[0:7]: Differential input, 40 ohm */
  44         .dram_sdqs0 = 0x00000030,
  45         .dram_sdqs1 = 0x00000030,
  46         .dram_sdqs2 = 0x00000030,
  47         .dram_sdqs3 = 0x00000030,
  48         .dram_sdqs4 = 0x00000030,
  49         .dram_sdqs5 = 0x00000030,
  50         .dram_sdqs6 = 0x00000030,
  51         .dram_sdqs7 = 0x00000030,
  52
  53         /* DQM[0:7]: Differential input, 40 ohm */
  54         .dram_dqm0 = 0x00020030,
  55         .dram_dqm1 = 0x00020030,
  56         .dram_dqm2 = 0x00020030,
  57         .dram_dqm3 = 0x00020030,
  58         .dram_dqm4 = 0x00020030,
  59         .dram_dqm5 = 0x00020030,
  60         .dram_dqm6 = 0x00020030,
  61         .dram_dqm7 = 0x00020030,
  62 };
  63
  64 /* configure MX6Q/DUAL mmdc GRP io registers */
  65 struct mx6dq_iomux_grp_regs mx6dq_grp_ioregs = {
  66         /* DDR3 */
  67         .grp_ddr_type = 0x000c0000,
  68         .grp_ddrmode_ctl = 0x00020000,
  69         /* disable DDR pullups */
  70         .grp_ddrpke = 0x00000000,
  71         /* ADDR[00:16], SDBA[0:1]: 40 ohm */
  72         .grp_addds = 0x00000030,
  73         /* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */
  74         .grp_ctlds = 0x00000030,
  75         /* DATA[00:63]: Differential input, 40 ohm */
  76         .grp_ddrmode = 0x00020000,
  77         .grp_b0ds = 0x00000030,
  78         .grp_b1ds = 0x00000030,
  79         .grp_b2ds = 0x00000030,
  80         .grp_b3ds = 0x00000030,
  81         .grp_b4ds = 0x00000030,
  82         .grp_b5ds = 0x00000030,
  83         .grp_b6ds = 0x00000030,
  84         .grp_b7ds = 0x00000030,
  85 };
  86
  87 /* configure MX6SOLO/DUALLITE mmdc DDR io registers */
  88 struct mx6sdl_iomux_ddr_regs mx6sdl_ddr_ioregs = {
  89         /* SDCLK[0:1], CAS, RAS, Reset: Differential input, 40ohm */
  90         .dram_sdclk_0 = 0x00020030,
  91         .dram_sdclk_1 = 0x00020030,
  92         .dram_cas = 0x00020030,
  93         .dram_ras = 0x00020030,
  94         .dram_reset = 0x00020030,
  95         /* SDCKE[0:1]: 100k pull-up */
  96         .dram_sdcke0 = 0x00003000,
  97         .dram_sdcke1 = 0x00003000,
  98         /* SDBA2: pull-up disabled */
  99         .dram_sdba2 = 0x00000000,
 100         /* SDODT[0:1]: 100k pull-up, 40 ohm */
 101         .dram_sdodt0 = 0x00003030,
 102         .dram_sdodt1 = 0x00003030,
 103         /* SDQS[0:7]: Differential input, 40 ohm */
 104         .dram_sdqs0 = 0x00000030,
 105         .dram_sdqs1 = 0x00000030,
 106         .dram_sdqs2 = 0x00000030,
 107         .dram_sdqs3 = 0x00000030,
 108         .dram_sdqs4 = 0x00000030,
 109         .dram_sdqs5 = 0x00000030,
 110         .dram_sdqs6 = 0x00000030,
 111         .dram_sdqs7 = 0x00000030,
 112
 113         /* DQM[0:7]: Differential input, 40 ohm */
 114         .dram_dqm0 = 0x00020030,
 115         .dram_dqm1 = 0x00020030,
 116         .dram_dqm2 = 0x00020030,
 117         .dram_dqm3 = 0x00020030,
 118         .dram_dqm4 = 0x00020030,
 119         .dram_dqm5 = 0x00020030,
 120         .dram_dqm6 = 0x00020030,
 121         .dram_dqm7 = 0x00020030,
 122 };
 123
 124 /* configure MX6SOLO/DUALLITE mmdc GRP io registers */
 125 struct mx6sdl_iomux_grp_regs mx6sdl_grp_ioregs = {
 126         /* DDR3 */
 127         .grp_ddr_type = 0x000c0000,
 128         /* SDQS[0:7]: Differential input, 40 ohm */
 129         .grp_ddrmode_ctl = 0x00020000,
 130         /* disable DDR pullups */
 131         .grp_ddrpke = 0x00000000,
 132         /* ADDR[00:16], SDBA[0:1]: 40 ohm */
 133         .grp_addds = 0x00000030,
 134         /* CS0/CS1/SDBA2/CKE0/CKE1/SDWE: 40 ohm */
 135         .grp_ctlds = 0x00000030,
 136         /* DATA[00:63]: Differential input, 40 ohm */
 137         .grp_ddrmode = 0x00020000,
 138         .grp_b0ds = 0x00000030,
 139         .grp_b1ds = 0x00000030,
 140         .grp_b2ds = 0x00000030,
 141         .grp_b3ds = 0x00000030,
 142         .grp_b4ds = 0x00000030,
 143         .grp_b5ds = 0x00000030,
 144         .grp_b6ds = 0x00000030,
 145         .grp_b7ds = 0x00000030,
 146 };
 147
 148 /* MT41K64M16JT-125 (1Gb density) */
 149 static struct mx6_ddr3_cfg mt41k64m16jt_125 = {
 150         .mem_speed = 1600,
 151         .density = 1,
 152         .width = 16,
 153         .banks = 8,
 154         .rowaddr = 13,
 155         .coladdr = 10,
 156         .pagesz = 2,
 157         .trcd = 1375,
 158         .trcmin = 4875,
 159         .trasmin = 3500,
 160 };
 161
 162 /* MT41K128M16JT-125 (2Gb density) */
 163 static struct mx6_ddr3_cfg mt41k128m16jt_125 = {
 164         .mem_speed = 1600,
 165         .density = 2,
 166         .width = 16,
 167         .banks = 8,
 168         .rowaddr = 14,
 169         .coladdr = 10,
 170         .pagesz = 2,
 171         .trcd = 1375,
 172         .trcmin = 4875,
 173         .trasmin = 3500,
 174 };
 175
 176 /* MT41K256M16HA-125 (4Gb density) */
 177 static struct mx6_ddr3_cfg mt41k256m16ha_125 = {
 178         .mem_speed = 1600,
 179         .density = 4,
 180         .width = 16,
 181         .banks = 8,
 182         .rowaddr = 15,
 183         .coladdr = 10,
 184         .pagesz = 2,
 185         .trcd = 1375,
 186         .trcmin = 4875,
 187         .trasmin = 3500,
 188 };
 189
 190 /* MT41K512M16HA-125 (8Gb density) */
 191 static struct mx6_ddr3_cfg mt41k512m16ha_125 = {
 192         .mem_speed = 1600,
 193         .density = 8,
 194         .width = 16,
 195         .banks = 8,
 196         .rowaddr = 16,
 197         .coladdr = 10,
 198         .pagesz = 2,
 199         .trcd = 1375,
 200         .trcmin = 4875,
 201         .trasmin = 3500,
 202 };
 203
 204 /*
 205  * calibration - these are the various CPU/DDR3 combinations we support
 206  */
 207 static struct mx6_mmdc_calibration mx6sdl_64x16_mmdc_calib = {
 208         /* write leveling calibration determine */
 209         .p0_mpwldectrl0 = 0x004C004E,
 210         .p0_mpwldectrl1 = 0x00440044,
 211         /* Read DQS Gating calibration */
 212         .p0_mpdgctrl0 = 0x42440247,
 213         .p0_mpdgctrl1 = 0x02310232,
 214         /* Read Calibration: DQS delay relative to DQ read access */
 215         .p0_mprddlctl = 0x45424746,
 216         /* Write Calibration: DQ/DM delay relative to DQS write access */
 217         .p0_mpwrdlctl = 0x33382C31,
 218 };
 219
 220 /* TODO: update with calibrated values */
 221 static struct mx6_mmdc_calibration mx6dq_64x64_mmdc_calib = {
 222         /* write leveling calibration determine */
 223         .p0_mpwldectrl0 = 0x00190017,
 224         .p0_mpwldectrl1 = 0x00140026,
 225         .p1_mpwldectrl0 = 0x0021001C,
 226         .p1_mpwldectrl1 = 0x0011001D,
 227         /* Read DQS Gating calibration */
 228         .p0_mpdgctrl0 = 0x43380347,
 229         .p0_mpdgctrl1 = 0x433C034D,
 230         .p1_mpdgctrl0 = 0x032C0324,
 231         .p1_mpdgctrl1 = 0x03310232,
 232         /* Read Calibration: DQS delay relative to DQ read access */
 233         .p0_mprddlctl = 0x3C313539,
 234         .p1_mprddlctl = 0x37343141,
 235         /* Write Calibration: DQ/DM delay relative to DQS write access */
 236         .p0_mpwrdlctl = 0x36393C39,
 237         .p1_mpwrdlctl = 0x42344438,
 238 };
 239
 240 /* TODO: update with calibrated values */
 241 static struct mx6_mmdc_calibration mx6sdl_64x64_mmdc_calib = {
 242         /* write leveling calibration determine */
 243         .p0_mpwldectrl0 = 0x003C003C,
 244         .p0_mpwldectrl1 = 0x001F002A,
 245         .p1_mpwldectrl0 = 0x00330038,
 246         .p1_mpwldectrl1 = 0x0022003F,
 247         /* Read DQS Gating calibration */
 248         .p0_mpdgctrl0 = 0x42410244,
 249         .p0_mpdgctrl1 = 0x4234023A,
 250         .p1_mpdgctrl0 = 0x022D022D,
 251         .p1_mpdgctrl1 = 0x021C0228,
 252         /* Read Calibration: DQS delay relative to DQ read access */
 253         .p0_mprddlctl = 0x484A4C4B,
 254         .p1_mprddlctl = 0x4B4D4E4B,
 255         /* Write Calibration: DQ/DM delay relative to DQS write access */
 256         .p0_mpwrdlctl = 0x33342B32,
 257         .p1_mpwrdlctl = 0x3933332B,
 258 };
 259
 260 static struct mx6_mmdc_calibration mx6dq_256x16_mmdc_calib = {
 261         /* write leveling calibration determine */
 262         .p0_mpwldectrl0 = 0x001B0016,
 263         .p0_mpwldectrl1 = 0x000C000E,
 264         /* Read DQS Gating calibration */
 265         .p0_mpdgctrl0 = 0x4324033A,
 266         .p0_mpdgctrl1 = 0x00000000,
 267         /* Read Calibration: DQS delay relative to DQ read access */
 268         .p0_mprddlctl = 0x40403438,
 269         /* Write Calibration: DQ/DM delay relative to DQS write access */
 270         .p0_mpwrdlctl = 0x40403D36,
 271 };
 272
 273 static struct mx6_mmdc_calibration mx6sdl_256x16_mmdc_calib = {
 274         /* write leveling calibration determine */
 275         .p0_mpwldectrl0 = 0x00420043,
 276         .p0_mpwldectrl1 = 0x0016001A,
 277         /* Read DQS Gating calibration */
 278         .p0_mpdgctrl0 = 0x4238023B,
 279         .p0_mpdgctrl1 = 0x00000000,
 280         /* Read Calibration: DQS delay relative to DQ read access */
 281         .p0_mprddlctl = 0x40404849,
 282         /* Write Calibration: DQ/DM delay relative to DQS write access */
 283         .p0_mpwrdlctl = 0x40402E2F,
 284 };
 285
 286 static struct mx6_mmdc_calibration mx6dq_128x32_mmdc_calib = {
 287         /* write leveling calibration determine */
 288         .p0_mpwldectrl0 = 0x00190017,
 289         .p0_mpwldectrl1 = 0x00140026,
 290         /* Read DQS Gating calibration */
 291         .p0_mpdgctrl0 = 0x43380347,
 292         .p0_mpdgctrl1 = 0x433C034D,
 293         /* Read Calibration: DQS delay relative to DQ read access */
 294         .p0_mprddlctl = 0x3C313539,
 295         /* Write Calibration: DQ/DM delay relative to DQS write access */
 296         .p0_mpwrdlctl = 0x36393C39,
 297 };
 298
 299 static struct mx6_mmdc_calibration mx6sdl_128x32_mmdc_calib = {
 300         /* write leveling calibration determine */
 301         .p0_mpwldectrl0 = 0x003C003C,
 302         .p0_mpwldectrl1 = 0x001F002A,
 303         /* Read DQS Gating calibration */
 304         .p0_mpdgctrl0 = 0x42410244,
 305         .p0_mpdgctrl1 = 0x4234023A,
 306         /* Read Calibration: DQS delay relative to DQ read access */
 307         .p0_mprddlctl = 0x484A4C4B,
 308         /* Write Calibration: DQ/DM delay relative to DQS write access */
 309         .p0_mpwrdlctl = 0x33342B32,
 310 };
 311
 312 static struct mx6_mmdc_calibration mx6dq_128x64_mmdc_calib = {
 313         /* write leveling calibration determine */
 314         .p0_mpwldectrl0 = 0x00190017,
 315         .p0_mpwldectrl1 = 0x00140026,
 316         .p1_mpwldectrl0 = 0x0021001C,
 317         .p1_mpwldectrl1 = 0x0011001D,
 318         /* Read DQS Gating calibration */
 319         .p0_mpdgctrl0 = 0x43380347,
 320         .p0_mpdgctrl1 = 0x433C034D,
 321         .p1_mpdgctrl0 = 0x032C0324,
 322         .p1_mpdgctrl1 = 0x03310232,
 323         /* Read Calibration: DQS delay relative to DQ read access */
 324         .p0_mprddlctl = 0x3C313539,
 325         .p1_mprddlctl = 0x37343141,
 326         /* Write Calibration: DQ/DM delay relative to DQS write access */
 327         .p0_mpwrdlctl = 0x36393C39,
 328         .p1_mpwrdlctl = 0x42344438,
 329 };
 330
 331 static struct mx6_mmdc_calibration mx6sdl_128x64_mmdc_calib = {
 332         /* write leveling calibration determine */
 333         .p0_mpwldectrl0 = 0x003C003C,
 334         .p0_mpwldectrl1 = 0x001F002A,
 335         .p1_mpwldectrl0 = 0x00330038,
 336         .p1_mpwldectrl1 = 0x0022003F,
 337         /* Read DQS Gating calibration */
 338         .p0_mpdgctrl0 = 0x42410244,
 339         .p0_mpdgctrl1 = 0x4234023A,
 340         .p1_mpdgctrl0 = 0x022D022D,
 341         .p1_mpdgctrl1 = 0x021C0228,
 342         /* Read Calibration: DQS delay relative to DQ read access */
 343         .p0_mprddlctl = 0x484A4C4B,
 344         .p1_mprddlctl = 0x4B4D4E4B,
 345         /* Write Calibration: DQ/DM delay relative to DQS write access */
 346         .p0_mpwrdlctl = 0x33342B32,
 347         .p1_mpwrdlctl = 0x3933332B,
 348 };
 349
 350 static struct mx6_mmdc_calibration mx6dq_256x32_mmdc_calib = {
 351         /* write leveling calibration determine */
 352         .p0_mpwldectrl0 = 0x001E001A,
 353         .p0_mpwldectrl1 = 0x0026001F,
 354         /* Read DQS Gating calibration */
 355         .p0_mpdgctrl0 = 0x43370349,
 356         .p0_mpdgctrl1 = 0x032D0327,
 357         /* Read Calibration: DQS delay relative to DQ read access */
 358         .p0_mprddlctl = 0x3D303639,
 359         /* Write Calibration: DQ/DM delay relative to DQS write access */
 360         .p0_mpwrdlctl = 0x32363934,
 361 };
 362
 363 static struct mx6_mmdc_calibration mx6sdl_256x32_mmdc_calib = {
 364         /* write leveling calibration determine */
 365         .p0_mpwldectrl0 = 0X00480047,
 366         .p0_mpwldectrl1 = 0X003D003F,
 367         /* Read DQS Gating calibration */
 368         .p0_mpdgctrl0 = 0X423E0241,
 369         .p0_mpdgctrl1 = 0X022B022C,
 370         /* Read Calibration: DQS delay relative to DQ read access */
 371         .p0_mprddlctl = 0X49454A4A,
 372         /* Write Calibration: DQ/DM delay relative to DQS write access */
 373         .p0_mpwrdlctl = 0X2E372C32,
 374 };
 375
 376 static struct mx6_mmdc_calibration mx6dq_256x64_mmdc_calib = {
 377         /* write leveling calibration determine */
 378         .p0_mpwldectrl0 = 0X00220021,
 379         .p0_mpwldectrl1 = 0X00200030,
 380         .p1_mpwldectrl0 = 0X002D0027,
 381         .p1_mpwldectrl1 = 0X00150026,
 382         /* Read DQS Gating calibration */
 383         .p0_mpdgctrl0 = 0x43330342,
 384         .p0_mpdgctrl1 = 0x0339034A,
 385         .p1_mpdgctrl0 = 0x032F0325,
 386         .p1_mpdgctrl1 = 0x032F022E,
 387         /* Read Calibration: DQS delay relative to DQ read access */
 388         .p0_mprddlctl = 0X3A2E3437,
 389         .p1_mprddlctl = 0X35312F3F,
 390         /* Write Calibration: DQ/DM delay relative to DQS write access */
 391         .p0_mpwrdlctl = 0X33363B37,
 392         .p1_mpwrdlctl = 0X40304239,
 393 };
 394
 395 static struct mx6_mmdc_calibration mx6sdl_256x64_mmdc_calib = {
 396         /* write leveling calibration determine */
 397         .p0_mpwldectrl0 = 0x0048004A,
 398         .p0_mpwldectrl1 = 0x003F004A,
 399         .p1_mpwldectrl0 = 0x001E0028,
 400         .p1_mpwldectrl1 = 0x002C0043,
 401         /* Read DQS Gating calibration */
 402         .p0_mpdgctrl0 = 0x02250219,
 403         .p0_mpdgctrl1 = 0x01790202,
 404         .p1_mpdgctrl0 = 0x02080208,
 405         .p1_mpdgctrl1 = 0x016C0175,
 406         /* Read Calibration: DQS delay relative to DQ read access */
 407         .p0_mprddlctl = 0x4A4C4D4C,
 408         .p1_mprddlctl = 0x494C4A48,
 409         /* Write Calibration: DQ/DM delay relative to DQS write access */
 410         .p0_mpwrdlctl = 0x403F3437,
 411         .p1_mpwrdlctl = 0x383A3930,
 412 };
 413
 414 static struct mx6_mmdc_calibration mx6sdl_256x64x2_mmdc_calib = {
 415         /* write leveling calibration determine */
 416         .p0_mpwldectrl0 = 0x001F003F,
 417         .p0_mpwldectrl1 = 0x001F001F,
 418         .p1_mpwldectrl0 = 0x001F004E,
 419         .p1_mpwldectrl1 = 0x0059001F,
 420         /* Read DQS Gating calibration */
 421         .p0_mpdgctrl0   = 0x42220225,
 422         .p0_mpdgctrl1   = 0x0213021F,
 423         .p1_mpdgctrl0   = 0x022C0242,
 424         .p1_mpdgctrl1   = 0x022C0244,
 425         /* Read Calibration: DQS delay relative to DQ read access */
 426         .p0_mprddlctl   = 0x474A4C4A,
 427         .p1_mprddlctl   = 0x48494C45,
 428         /* Write Calibration: DQ/DM delay relative to DQS write access */
 429         .p0_mpwrdlctl   = 0x3F3F3F36,
 430         .p1_mpwrdlctl   = 0x3F36363F,
 431 };
 432
 433 static struct mx6_mmdc_calibration mx6sdl_128x64x2_mmdc_calib = {
 434         /* write leveling calibration determine */
 435         .p0_mpwldectrl0 = 0x001F003F,
 436         .p0_mpwldectrl1 = 0x001F001F,
 437         .p1_mpwldectrl0 = 0x001F004E,
 438         .p1_mpwldectrl1 = 0x0059001F,
 439         /* Read DQS Gating calibration */
 440         .p0_mpdgctrl0   = 0x42220225,
 441         .p0_mpdgctrl1   = 0x0213021F,
 442         .p1_mpdgctrl0   = 0x022C0242,
 443         .p1_mpdgctrl1   = 0x022C0244,
 444         /* Read Calibration: DQS delay relative to DQ read access */
 445         .p0_mprddlctl   = 0x474A4C4A,
 446         .p1_mprddlctl   = 0x48494C45,
 447         /* Write Calibration: DQ/DM delay relative to DQS write access */
 448         .p0_mpwrdlctl   = 0x3F3F3F36,
 449         .p1_mpwrdlctl   = 0x3F36363F,
 450 };
 451
 452 static struct mx6_mmdc_calibration mx6dq_512x32_mmdc_calib = {
 453         /* write leveling calibration determine */
 454         .p0_mpwldectrl0 = 0x002A0025,
 455         .p0_mpwldectrl1 = 0x003A002A,
 456         /* Read DQS Gating calibration */
 457         .p0_mpdgctrl0 = 0x43430356,
 458         .p0_mpdgctrl1 = 0x033C0335,
 459         /* Read Calibration: DQS delay relative to DQ read access */
 460         .p0_mprddlctl = 0x4B373F42,
 461         /* Write Calibration: DQ/DM delay relative to DQS write access */
 462         .p0_mpwrdlctl = 0x303E3C36,
 463 };
 464
 465 static struct mx6_mmdc_calibration mx6dq_512x64_mmdc_calib = {
 466         /* write leveling calibration determine */
 467         .p0_mpwldectrl0 = 0x00230020,
 468         .p0_mpwldectrl1 = 0x002F002A,
 469         .p1_mpwldectrl0 = 0x001D0027,
 470         .p1_mpwldectrl1 = 0x00100023,
 471         /* Read DQS Gating calibration */
 472         .p0_mpdgctrl0 = 0x03250339,
 473         .p0_mpdgctrl1 = 0x031C0316,
 474         .p1_mpdgctrl0 = 0x03210331,
 475         .p1_mpdgctrl1 = 0x031C025A,
 476         /* Read Calibration: DQS delay relative to DQ read access */
 477         .p0_mprddlctl = 0x40373C40,
 478         .p1_mprddlctl = 0x3A373646,
 479         /* Write Calibration: DQ/DM delay relative to DQS write access */
 480         .p0_mpwrdlctl = 0x2E353933,
 481         .p1_mpwrdlctl = 0x3C2F3F35,
 482 };
 483
 484 static void spl_dram_init(int width, int size_mb, int board_model)
 485 {
 486         struct mx6_ddr3_cfg *mem = NULL;
 487         struct mx6_mmdc_calibration *calib = NULL;
 488         struct mx6_ddr_sysinfo sysinfo = {
 489                 /* width of data bus:0=16,1=32,2=64 */
 490                 .dsize = width/32,
 491                 /* config for full 4GB range so that get_mem_size() works */
 492                 .cs_density = 32, /* 32Gb per CS */
 493                 /* single chip select */
 494                 .ncs = 1,
 495                 .cs1_mirror = 0,
 496                 .rtt_wr = 1 /*DDR3_RTT_60_OHM*/,        /* RTT_Wr = RZQ/4 */
 497 #ifdef RTT_NOM_120OHM
 498                 .rtt_nom = 2 /*DDR3_RTT_120_OHM*/,      /* RTT_Nom = RZQ/2 */
 499 #else
 500                 .rtt_nom = 1 /*DDR3_RTT_60_OHM*/,       /* RTT_Nom = RZQ/4 */
 501 #endif
 502                 .walat = 1,     /* Write additional latency */
 503                 .ralat = 5,     /* Read additional latency */
 504                 .mif3_mode = 3, /* Command prediction working mode */
 505                 .bi_on = 1,     /* Bank interleaving enabled */
 506                 .sde_to_rst = 0x10,     /* 14 cycles, 200us (JEDEC default) */
 507                 .rst_to_cke = 0x23,     /* 33 cycles, 500us (JEDEC default) */
 508                 .pd_fast_exit = 1, /* enable precharge power-down fast exit */
 509                 .ddr_type = DDR_TYPE_DDR3,
 510                 .refsel = 1,    /* Refresh cycles at 32KHz */
 511                 .refr = 7,      /* 8 refresh commands per refresh cycle */
 512         };
 513
 514         /*
 515          * MMDC Calibration requires the following data:
 516          *   mx6_mmdc_calibration - board-specific calibration (routing delays)
 517          *      these calibration values depend on board routing, SoC, and DDR
 518          *   mx6_ddr_sysinfo - board-specific memory architecture (width/cs/etc)
 519          *   mx6_ddr_cfg - chip specific timing/layout details
 520          */
 521         if (width == 16 && size_mb == 128) {
 522                 mem = &mt41k64m16jt_125;
 523                 if (is_cpu_type(MXC_CPU_MX6Q))
 524                         ;
 525                 else
 526                         calib = &mx6sdl_64x16_mmdc_calib;
 527                 debug("1gB density\n");
 528         } else if (width == 16 && size_mb == 256) {
 529                 /* 1x 2Gb density chip - same calib as 2x 2Gb */
 530                 mem = &mt41k128m16jt_125;
 531                 if (is_cpu_type(MXC_CPU_MX6Q))
 532                         calib = &mx6dq_128x32_mmdc_calib;
 533                 else
 534                         calib = &mx6sdl_128x32_mmdc_calib;
 535                 debug("2gB density\n");
 536         } else if (width == 16 && size_mb == 512) {
 537                 mem = &mt41k256m16ha_125;
 538                 if (is_cpu_type(MXC_CPU_MX6Q))
 539                         calib = &mx6dq_256x16_mmdc_calib;
 540                 else
 541                         calib = &mx6sdl_256x16_mmdc_calib;
 542                 debug("4gB density\n");
 543         } else if (width == 32 && size_mb == 256) {
 544                 /* Same calib as width==16, size==128 */
 545                 mem = &mt41k64m16jt_125;
 546                 if (is_cpu_type(MXC_CPU_MX6Q))
 547                         ;
 548                 else
 549                         calib = &mx6sdl_64x16_mmdc_calib;
 550                 debug("1gB density\n");
 551         } else if (width == 32 && size_mb == 512) {
 552                 mem = &mt41k128m16jt_125;
 553                 if (is_cpu_type(MXC_CPU_MX6Q))
 554                         calib = &mx6dq_128x32_mmdc_calib;
 555                 else
 556                         calib = &mx6sdl_128x32_mmdc_calib;
 557                 debug("2gB density\n");
 558         }  else if (width == 32 && size_mb == 1024) {
 559                 mem = &mt41k256m16ha_125;
 560                 if (is_cpu_type(MXC_CPU_MX6Q))
 561                         calib = &mx6dq_256x32_mmdc_calib;
 562                 else
 563                         calib = &mx6sdl_256x32_mmdc_calib;
 564                 debug("4gB density\n");
 565         } else if (width == 32 && size_mb == 2048) {
 566                 mem = &mt41k512m16ha_125;
 567                 if (is_cpu_type(MXC_CPU_MX6Q))
 568                         calib = &mx6dq_512x32_mmdc_calib;
 569                 debug("8gB density\n");
 570         } else if (width == 64 && size_mb == 512) {
 571                 mem = &mt41k64m16jt_125;
 572                 debug("1gB density\n");
 573                 if (is_cpu_type(MXC_CPU_MX6Q))
 574                         calib = &mx6dq_64x64_mmdc_calib;
 575                 else
 576                         calib = &mx6sdl_64x64_mmdc_calib;
 577         } else if (width == 64 && size_mb == 1024) {
 578                 mem = &mt41k128m16jt_125;
 579                 if (is_cpu_type(MXC_CPU_MX6Q))
 580                         calib = &mx6dq_128x64_mmdc_calib;
 581                 else
 582                         calib = &mx6sdl_128x64_mmdc_calib;
 583                 debug("2gB density\n");
 584         } else if (width == 64 && size_mb == 2048) {
 585                 switch(board_model) {
 586                 case GW5905:
 587                         /* 8xMT41K128M16 (2GiB) fly-by mirrored 2-chipsels */
 588                         mem = &mt41k128m16jt_125;
 589                         debug("2gB density - 2 chipsel\n");
 590                         if (!is_cpu_type(MXC_CPU_MX6Q)) {
 591                                 calib = &mx6sdl_128x64x2_mmdc_calib;
 592                                 sysinfo.ncs = 2;
 593                                 sysinfo.cs_density = 10; /* CS0_END=39 */
 594                                 sysinfo.cs1_mirror = 1; /* mirror enabled */
 595                         }
 596                         break;
 597                 default:
 598                         mem = &mt41k256m16ha_125;
 599                         if (is_cpu_type(MXC_CPU_MX6Q))
 600                                 calib = &mx6dq_256x64_mmdc_calib;
 601                         else
 602                                 calib = &mx6sdl_256x64_mmdc_calib;
 603                         debug("4gB density\n");
 604                         break;
 605                 }
 606         } else if (width == 64 && size_mb == 4096) {
 607                 switch(board_model) {
 608                 case GW5903:
 609                         /* 8xMT41K256M16 (4GiB) fly-by mirrored 2-chipsels */
 610                         mem = &mt41k256m16ha_125;
 611                         debug("4gB density - 2 chipsel\n");
 612                         if (!is_cpu_type(MXC_CPU_MX6Q)) {
 613                                 calib = &mx6sdl_256x64x2_mmdc_calib;
 614                                 sysinfo.ncs = 2;
 615                                 sysinfo.cs_density = 18; /* CS0_END=71 */
 616                                 sysinfo.cs1_mirror = 1; /* mirror enabled */
 617                         }
 618                         break;
 619                 default:
 620                         mem = &mt41k512m16ha_125;
 621                         if (is_cpu_type(MXC_CPU_MX6Q))
 622                                 calib = &mx6dq_512x64_mmdc_calib;
 623                         debug("8gB density\n");
 624                         break;
 625                 }
 626         }
 627
 628         if (!(mem && calib)) {
 629                 puts("Error: Invalid Calibration/Board Configuration\n");
 630                 printf("MEM    : %s\n", mem ? "OKAY" : "NULL");
 631                 printf("CALIB  : %s\n", calib ? "OKAY" : "NULL");
 632                 printf("CPUTYPE: %s\n",
 633                        is_cpu_type(MXC_CPU_MX6Q) ? "IMX6Q" : "IMX6DL");
 634                 printf("SIZE_MB: %d\n", size_mb);
 635                 printf("WIDTH  : %d\n", width);
 636                 hang();
 637         }
 638
 639         if (is_cpu_type(MXC_CPU_MX6Q))
 640                 mx6dq_dram_iocfg(width, &mx6dq_ddr_ioregs,
 641                                  &mx6dq_grp_ioregs);
 642         else
 643                 mx6sdl_dram_iocfg(width, &mx6sdl_ddr_ioregs,
 644                                   &mx6sdl_grp_ioregs);
 645         mx6_dram_cfg(&sysinfo, calib, mem);
 646 }
 647
 648 static void ccgr_init(void)
 649 {
 650         struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 651
 652         writel(0x00C03F3F, &ccm->CCGR0);
 653         writel(0x0030FC03, &ccm->CCGR1);
 654         writel(0x0FFFC000, &ccm->CCGR2);
 655         writel(0x3FF00000, &ccm->CCGR3);
 656         writel(0xFFFFF300, &ccm->CCGR4);        /* enable NAND/GPMI/BCH clks */
 657         writel(0x0F0000C3, &ccm->CCGR5);
 658         writel(0x000003FF, &ccm->CCGR6);
 659 }
 660
 661 /*
 662  * called from C runtime startup code (arch/arm/lib/crt0.S:_main)
 663  * - we have a stack and a place to store GD, both in SRAM
 664  * - no variable global data is available
 665  */
 666 void board_init_f(ulong dummy)
 667 {
 668         struct ventana_board_info ventana_info;
 669         int board_model;
 670
 671         /* setup clock gating */
 672         ccgr_init();
 673
 674         /* setup AIPS and disable watchdog */
 675         arch_cpu_init();
 676
 677         /* setup AXI */
 678         gpr_init();
 679
 680         /* iomux and setup of uart/i2c */
 681         setup_iomux_uart();
 682         setup_ventana_i2c(0);
 683         setup_ventana_i2c(1);
 684
 685         /* setup GP timer */
 686         timer_init();
 687
 688         /* UART clocks enabled and gd valid - init serial console */
 689         preloader_console_init();
 690
 691         /* read/validate EEPROM info to determine board model and SDRAM cfg */
 692         board_model = read_eeprom(CONFIG_I2C_GSC, &ventana_info);
 693
 694         /* configure model-specific gpio */
 695         setup_iomux_gpio(board_model, &ventana_info);
 696
 697         /* provide some some default: 32bit 128MB */
 698         if (GW_UNKNOWN == board_model)
 699                 hang();
 700
 701         /* configure MMDC for SDRAM width/size and per-model calibration */
 702         spl_dram_init(8 << ventana_info.sdram_width,
 703                       16 << ventana_info.sdram_size,
 704                       board_model);
 705 }
 706
 707 void board_boot_order(u32 *spl_boot_list)
 708 {
 709         spl_boot_list[0] = spl_boot_device();
 710         switch (spl_boot_list[0]) {
 711         case BOOT_DEVICE_NAND:
 712                 spl_boot_list[1] = BOOT_DEVICE_MMC1;
 713                 spl_boot_list[2] = BOOT_DEVICE_UART;
 714                 break;
 715         case BOOT_DEVICE_MMC1:
 716                 spl_boot_list[1] = BOOT_DEVICE_UART;
 717                 break;
 718         }
 719 }
 720
 721 /* called from board_init_r after gd setup if CONFIG_SPL_BOARD_INIT defined */
 722 /* its our chance to print info about boot device */
 723 void spl_board_init(void)
 724 {
 725         /* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 */
 726         u32 boot_device = spl_boot_device();
 727
 728         switch (boot_device) {
 729         case BOOT_DEVICE_MMC1:
 730                 puts("Booting from MMC\n");
 731                 break;
 732         case BOOT_DEVICE_NAND:
 733                 puts("Booting from NAND\n");
 734                 break;
 735         case BOOT_DEVICE_SATA:
 736                 puts("Booting from SATA\n");
 737                 break;
 738         default:
 739                 puts("Unknown boot device\n");
 740         }
 741
 742         /* PMIC init */
 743         setup_pmic();
 744 }
 745
 746 #ifdef CONFIG_SPL_OS_BOOT
 747 /* return 1 if we wish to boot to uboot vs os (falcon mode) */
 748 int spl_start_uboot(void)
 749 {
 750         unsigned char ret = 1;
 751
 752         debug("%s\n", __func__);
 753 #ifdef CONFIG_SPL_ENV_SUPPORT
 754         env_init();
 755         env_load();
 756         debug("boot_os=%s\n", env_get("boot_os"));
 757         if (env_get_yesno("boot_os") == 1)
 758                 ret = 0;
 759 #else
 760         /* use i2c-0:0x50:0x00 for falcon boot mode (0=linux, else uboot) */
 761         i2c_set_bus_num(0);
 762         gsc_i2c_read(0x50, 0x0, 1, &ret, 1);
 763 #endif
 764         if (!ret)
 765                 gsc_boot_wd_disable();
 766
 767         debug("%s booting %s\n", __func__, ret ? "uboot" : "linux");
 768         return ret;
 769 }
 770 #endif