board/gateworks/gw_ventana/eeprom.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2014 Gateworks Corporation
   4  * Author: Tim Harvey <tharvey@gateworks.com>
   5  */
   6
   7 #include <common.h>
   8 #include <errno.h>
   9 #include <i2c.h>
  10 #include <malloc.h>
  11 #include <asm/bitops.h>
  12
  13 #include "gsc.h"
  14 #include "ventana_eeprom.h"
  15
  16 /* read ventana EEPROM, check for validity, and return baseboard type */
  17 int
  18 read_eeprom(int bus, struct ventana_board_info *info)
  19 {
  20         int i;
  21         int chksum;
  22         char baseboard;
  23         int type;
  24         unsigned char *buf = (unsigned char *)info;
  25
  26         memset(info, 0, sizeof(*info));
  27
  28         /*
  29          * On a board with a missing/depleted backup battery for GSC, the
  30          * board may be ready to probe the GSC before its firmware is
  31          * running.  We will wait here indefinately for the GSC/EEPROM.
  32          */
  33         while (1) {
  34                 if (0 == i2c_set_bus_num(bus) &&
  35                     0 == i2c_probe(GSC_EEPROM_ADDR))
  36                         break;
  37                 mdelay(1);
  38         }
  39
  40         /* read eeprom config section */
  41         if (gsc_i2c_read(GSC_EEPROM_ADDR, 0x00, 1, buf, sizeof(*info))) {
  42                 puts("EEPROM: Failed to read EEPROM\n");
  43                 return GW_UNKNOWN;
  44         }
  45
  46         /* sanity checks */
  47         if (info->model[0] != 'G' || info->model[1] != 'W') {
  48                 puts("EEPROM: Invalid Model in EEPROM\n");
  49                 return GW_UNKNOWN;
  50         }
  51
  52         /* validate checksum */
  53         for (chksum = 0, i = 0; i < sizeof(*info)-2; i++)
  54                 chksum += buf[i];
  55         if ((info->chksum[0] != chksum>>8) ||
  56             (info->chksum[1] != (chksum&0xff))) {
  57                 puts("EEPROM: Failed EEPROM checksum\n");
  58                 return GW_UNKNOWN;
  59         }
  60
  61         /* original GW5400-A prototype */
  62         baseboard = info->model[3];
  63         if (strncasecmp((const char *)info->model, "GW5400-A", 8) == 0)
  64                 baseboard = '0';
  65
  66         type = GW_UNKNOWN;
  67         switch (baseboard) {
  68         case '0': /* original GW5400-A prototype */
  69                 type = GW54proto;
  70                 break;
  71         case '1':
  72                 type = GW51xx;
  73                 break;
  74         case '2':
  75                 type = GW52xx;
  76                 break;
  77         case '3':
  78                 type = GW53xx;
  79                 break;
  80         case '4':
  81                 type = GW54xx;
  82                 break;
  83         case '5':
  84                 if (info->model[4] == '1') {
  85                         type = GW551x;
  86                         break;
  87                 } else if (info->model[4] == '2') {
  88                         type = GW552x;
  89                         break;
  90                 } else if (info->model[4] == '3') {
  91                         type = GW553x;
  92                         break;
  93                 }
  94                 break;
  95         case '6':
  96                 if (info->model[4] == '0')
  97                         type = GW560x;
  98                 break;
  99         case '9':
 100                 if (info->model[4] == '0' && info->model[5] == '1')
 101                         type = GW5901;
 102                 else if (info->model[4] == '0' && info->model[5] == '2')
 103                         type = GW5902;
 104                 else if (info->model[4] == '0' && info->model[5] == '3')
 105                         type = GW5903;
 106                 else if (info->model[4] == '0' && info->model[5] == '4')
 107                         type = GW5904;
 108                 else if (info->model[4] == '0' && info->model[5] == '5')
 109                         type = GW5905;
 110                 else if (info->model[4] == '0' && info->model[5] == '6')
 111                         type = GW5906;
 112                 else if (info->model[4] == '0' && info->model[5] == '7')
 113                         type = GW5907;
 114                 else if (info->model[4] == '0' && info->model[5] == '8')
 115                         type = GW5908;
 116                 else if (info->model[4] == '0' && info->model[5] == '9')
 117                         type = GW5909;
 118                 break;
 119         }
 120         return type;
 121 }
 122
 123 /* list of config bits that the bootloader will remove from dtb if not set */
 124 struct ventana_eeprom_config econfig[] = {
 125         { "eth0", "ethernet0", EECONFIG_ETH0 },
 126         { "usb0", NULL, EECONFIG_USB0 },
 127         { "usb1", NULL, EECONFIG_USB1 },
 128         { "mmc0", NULL, EECONFIG_SD0 },
 129         { "mmc1", NULL, EECONFIG_SD1 },
 130         { "mmc2", NULL, EECONFIG_SD2 },
 131         { "mmc3", NULL, EECONFIG_SD3 },
 132         { /* Sentinel */ }
 133 };
 134
 135 #if defined(CONFIG_CMD_EECONFIG) && !defined(CONFIG_SPL_BUILD)
 136 static struct ventana_eeprom_config *get_config(const char *name)
 137 {
 138         struct ventana_eeprom_config *cfg = econfig;
 139
 140         while (cfg->name) {
 141                 if (0 == strcmp(name, cfg->name))
 142                         return cfg;
 143                 cfg++;
 144         }
 145         return NULL;
 146 }
 147
 148 static u8 econfig_bytes[sizeof(ventana_info.config)];
 149 static int econfig_init = -1;
 150
 151 static int do_econfig(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 152 {
 153         struct ventana_eeprom_config *cfg;
 154         struct ventana_board_info *info = &ventana_info;
 155         int i;
 156
 157         if (argc < 2)
 158                 return CMD_RET_USAGE;
 159
 160         /* initialize */
 161         if (econfig_init != 1) {
 162                 memcpy(econfig_bytes, info->config, sizeof(econfig_bytes));
 163                 econfig_init = 1;
 164         }
 165
 166         /* list configs */
 167         if ((strncmp(argv[1], "list", 4) == 0)) {
 168                 cfg = econfig;
 169                 while (cfg->name) {
 170                         printf("%s: %d\n", cfg->name,
 171                                test_bit(cfg->bit, econfig_bytes) ?  1 : 0);
 172                         cfg++;
 173                 }
 174         }
 175
 176         /* save */
 177         else if ((strncmp(argv[1], "save", 4) == 0)) {
 178                 unsigned char *buf = (unsigned char *)info;
 179                 int chksum;
 180
 181                 /* calculate new checksum */
 182                 memcpy(info->config, econfig_bytes, sizeof(econfig_bytes));
 183                 for (chksum = 0, i = 0; i < sizeof(*info)-2; i++)
 184                         chksum += buf[i];
 185                 debug("old chksum:0x%04x\n",
 186                       (info->chksum[0] << 8) | info->chksum[1]);
 187                 debug("new chksum:0x%04x\n", chksum);
 188                 info->chksum[0] = chksum >> 8;
 189                 info->chksum[1] = chksum & 0xff;
 190
 191                 /* write new config data */
 192                 if (gsc_i2c_write(GSC_EEPROM_ADDR, info->config - (u8 *)info,
 193                                   1, econfig_bytes, sizeof(econfig_bytes))) {
 194                         printf("EEPROM: Failed updating config\n");
 195                         return CMD_RET_FAILURE;
 196                 }
 197
 198                 /* write new config data */
 199                 if (gsc_i2c_write(GSC_EEPROM_ADDR, info->chksum - (u8 *)info,
 200                                   1, info->chksum, 2)) {
 201                         printf("EEPROM: Failed updating checksum\n");
 202                         return CMD_RET_FAILURE;
 203                 }
 204
 205                 printf("Config saved to EEPROM\n");
 206         }
 207
 208         /* get config */
 209         else if (argc == 2) {
 210                 cfg = get_config(argv[1]);
 211                 if (cfg) {
 212                         printf("%s: %d\n", cfg->name,
 213                                test_bit(cfg->bit, econfig_bytes) ? 1 : 0);
 214                 } else {
 215                         printf("invalid config: %s\n", argv[1]);
 216                         return CMD_RET_FAILURE;
 217                 }
 218         }
 219
 220         /* set config */
 221         else if (argc == 3) {
 222                 cfg = get_config(argv[1]);
 223                 if (cfg) {
 224                         if (simple_strtol(argv[2], NULL, 10)) {
 225                                 test_and_set_bit(cfg->bit, econfig_bytes);
 226                                 printf("Enabled %s\n", cfg->name);
 227                         } else {
 228                                 test_and_clear_bit(cfg->bit, econfig_bytes);
 229                                 printf("Disabled %s\n", cfg->name);
 230                         }
 231                 } else {
 232                         printf("invalid config: %s\n", argv[1]);
 233                         return CMD_RET_FAILURE;
 234                 }
 235         }
 236
 237         else
 238                 return CMD_RET_USAGE;
 239
 240         return CMD_RET_SUCCESS;
 241 }
 242
 243 U_BOOT_CMD(
 244         econfig, 3, 0, do_econfig,
 245         "EEPROM configuration",
 246         "list - list config\n"
 247         "save - save config to EEPROM\n"
 248         "<name> - get config 'name'\n"
 249         "<name> [0|1] - set config 'name' to value\n"
 250 );
 251
 252 #endif /* CONFIG_CMD_EECONFIG */