1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Copyright 2013 Freescale Semiconductor
5 * This file provides support for the ngPIXIS, a board-specific FPGA used on
6 * some Freescale reference boards.
10 * CPLD register set. Feel free to add board-specific #ifdefs where necessary.
13 u8 cpld_ver; /* 0x00 - CPLD Major Revision Register */
14 u8 cpld_ver_sub; /* 0x01 - CPLD Minor Revision Register */
15 u8 hw_ver; /* 0x02 - Hardware Revision Register */
16 u8 sw_ver; /* 0x03 - Software Revision register */
17 u8 res0[12]; /* 0x04 - 0x0F - not used */
18 u8 reset_ctl1; /* 0x10 - Reset control Register1 */
19 u8 reset_ctl2; /* 0x11 - Reset control Register2 */
20 u8 int_status; /* 0x12 - Interrupt status Register */
21 u8 flash_ctl_status; /* 0x13 - Flash control and status register */
22 u8 fan_ctl_status; /* 0x14 - Fan control and status register */
23 #if defined(CONFIG_TARGET_T1040D4RDB) || defined(CONFIG_TARGET_T1042D4RDB)
24 u8 int_mask; /* 0x15 - Interrupt mask Register */
26 u8 led_ctl_status; /* 0x15 - LED control and status register */
28 u8 sfp_ctl_status; /* 0x16 - SFP control and status register */
29 u8 misc_ctl_status; /* 0x17 - Miscellanies ctrl & status register*/
30 u8 boot_override; /* 0x18 - Boot override register */
31 u8 boot_config1; /* 0x19 - Boot config override register*/
32 u8 boot_config2; /* 0x1A - Boot config override register*/
36 /* Pointer to the CPLD register set */
38 u8 cpld_read(unsigned int reg);
39 void cpld_write(unsigned int reg, u8 value);
41 #define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
42 #define CPLD_WRITE(reg, value)\
43 cpld_write(offsetof(struct cpld_data, reg), value)
44 #define MISC_CTL_SG_SEL 0x80
45 #define MISC_CTL_AURORA_SEL 0x02
46 #define MISC_MUX_QE_TDM 0xc0