3 The T1040RDB is a Freescale reference board that hosts the T1040 SoC
4 (and variants). Variants inclued T1042 presonality of T1040, in which
5 case T1040RDB can also be called T1042RDB.
7 The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC.
8 (a personality of T1040 SoC). The board is similar to T1040RDB but is
9 designed specially with low power features targeted for Printing Image Market.
13 The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA
14 processor cores with high-performance data path acceleration architecture
15 and network peripheral interfaces required for networking & telecommunications.
17 The T1040/T1042 SoC includes the following function and features:
19 - Four e5500 cores, each with a private 256 KB L2 cache
20 - 256 KB shared L3 CoreNet platform cache (CPC)
21 - Interconnect CoreNet platform
22 - 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving
24 - Data Path Acceleration Architecture (DPAA) incorporating acceleration
25 for the following functions:
26 - Packet parsing, classification, and distribution
27 - Queue management for scheduling, packet sequencing, and congestion
29 - Cryptography Acceleration (SEC 5.0)
30 - RegEx Pattern Matching Acceleration (PME 2.2)
31 - IEEE Std 1588 support
32 - Hardware buffer management for buffer allocation and deallocation
34 - Integrated 8-port Gigabit Ethernet switch (T1040 only)
35 - Four 1 Gbps Ethernet controllers
36 - Two RGMII interfaces or one RGMII and one MII interfaces
37 - High speed peripheral interfaces
38 - Four PCI Express 2.0 controllers running at up to 5 GHz
39 - Two SATA controllers supporting 1.5 and 3.0 Gb/s operation
40 - Upto two QSGMII interface
41 - Upto six SGMII interface supporting 1000 Mbps
42 - One SGMII interface supporting upto 2500 Mbps
43 - Additional peripheral interfaces
44 - Two USB 2.0 controllers with integrated PHY
47 - Four I2C controllers
49 - Four GPIO controllers
50 - Integrated flash controller (IFC)
51 - LCD and HDMI interface (DIU) with 12 bit dual data rate
53 - Multicore programmable interrupt controller (PIC)
54 - Two 8-channel DMA engines
55 - Single source clocking implementation
56 - Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
58 T1040 SoC Personalities
59 -------------------------
62 T1022 is a reduced personality of T1040 with less core/clusters.
65 T1042 is a reduced personality of T1040 without Integrated 8-port Gigabit
66 Ethernet switch. Rest of the blocks are same as T1040
69 T1040RDB board Overview
70 -------------------------
71 - SERDES Connections, 8 lanes information:
77 6: mini PCIe connector
78 7: mini PCIe connector
81 - Supports rates of up to 1600 MHz data-rate
82 - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
84 - NAND flash: 1GB 8-bit NAND flash
85 - NOR: 128MB 16-bit NOR Flash
87 - Two on-board RGMII 10/100/1G ethernet ports.
90 - System and DDR clock (SYSCLK, “DDRCLK”)
94 - Supports two USB 2.0 ports with integrated PHYs
95 - Two type A ports with 5V@1.5A per port.
99 - On-board 64MB SPI flash
104 T1042RDB_PI board Overview
105 -------------------------
106 - SERDES Connections, 8 lanes information:
107 1, 2, 3, 4 : PCIe x4 slot
108 5: mini PCIe connector
109 6: mini PCIe connector
113 - Supports rates of up to 1600 MHz data-rate
114 - Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
116 - NAND flash: 1GB 8-bit NAND flash
117 - NOR: 128MB 16-bit NOR Flash
119 - Two on-board RGMII 10/100/1G ethernet ports.
122 - System and DDR clock (SYSCLK, “DDRCLK”)
125 - DIU supports video at up to 1280x1024x32bpp
128 - Supports two USB 2.0 ports with integrated PHYs
129 - Two type A ports with 5V@1.5A per port.
131 - SDHC/SDXC connector
133 - On-board 64MB SPI flash
140 The addresses in brackets are physical addresses.
142 Start Address End Address Description Size
143 0xF_FFDF_0000 0xF_FFDF_0FFF IFC - CPLD 4KB
144 0xF_FF80_0000 0xF_FF80_FFFF IFC - NAND Flash 64KB
145 0xF_FE00_0000 0xF_FEFF_FFFF CCSRBAR 16MB
146 0xF_F803_0000 0xF_F803_FFFF PCI Express 4 I/O Space 64KB
147 0xF_F802_0000 0xF_F802_FFFF PCI Express 3 I/O Space 64KB
148 0xF_F801_0000 0xF_F801_FFFF PCI Express 2 I/O Space 64KB
149 0xF_F800_0000 0xF_F800_FFFF PCI Express 1 I/O Space 64KB
150 0xF_F600_0000 0xF_F7FF_FFFF Queue manager software portal 32MB
151 0xF_F400_0000 0xF_F5FF_FFFF Buffer manager software portal 32MB
152 0xF_E800_0000 0xF_EFFF_FFFF IFC - NOR Flash 128MB
153 0xF_0000_0000 0xF_003F_FFFF DCSR 4MB
154 0xC_3000_0000 0xC_3FFF_FFFF PCI Express 4 Mem Space 256MB
155 0xC_2000_0000 0xC_2FFF_FFFF PCI Express 3 Mem Space 256MB
156 0xC_1000_0000 0xC_1FFF_FFFF PCI Express 2 Mem Space 256MB
157 0xC_0000_0000 0xC_0FFF_FFFF PCI Express 1 Mem Space 256MB
158 0x0_0000_0000 0x0_ffff_ffff DDR 2GB
162 ---------------------
163 Start End Definition Size
164 0xEFF40000 0xEFFFFFFF u-boot (current bank) 768KB
165 0xEFF20000 0xEFF3FFFF u-boot env (current bank) 128KB
166 0xEFF00000 0xEFF1FFFF FMAN Ucode (current bank) 128KB
167 0xED300000 0xEFEFFFFF rootfs (alt bank) 44MB
168 0xEC800000 0xEC8FFFFF Hardware device tree (alt bank) 1MB
169 0xEC020000 0xEC7FFFFF Linux.uImage (alt bank) 7MB + 875KB
170 0xEC000000 0xEC01FFFF RCW (alt bank) 128KB
171 0xEBF40000 0xEBFFFFFF u-boot (alt bank) 768KB
172 0xEBF20000 0xEBF3FFFF u-boot env (alt bank) 128KB
173 0xEBF00000 0xEBF1FFFF FMAN ucode (alt bank) 128KB
174 0xE9300000 0xEBEFFFFF rootfs (current bank) 44MB
175 0xE8800000 0xE88FFFFF Hardware device tree (cur bank) 11MB + 512KB
176 0xE8020000 0xE86FFFFF Linux.uImage (current bank) 7MB + 875KB
177 0xE8000000 0xE801FFFF RCW (current bank) 128KB
180 Various Software configurations/environment variables/commands
181 --------------------------------------------------------------
182 The below commands apply to the board
184 1. U-boot environment variable hwconfig
185 The default hwconfig is:
186 hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;usb1:
187 dr_mode=host,phy_type=utmi
188 Note: For USB gadget set "dr_mode=peripheral"
190 2. FMAN Ucode versions
191 fsl_fman_ucode_t1040.bin
193 3. Switching to alternate bank
194 Commands for switching to alternate bank.
196 1. To change from vbank0 to vbank4
197 => qixis_reset altbank (it will boot using vbank4)
199 2.To change from vbank4 to vbank0
200 => qixis reset (it will boot using vbank0)
202 NAND boot with 2 Stage boot loader
203 ----------------------------------
204 PBL initialise the internal SRAM and copy SPL(160KB) in SRAM.
205 SPL further initialise DDR using SPD and environment variables and copy
206 u-boot(768 KB) from flash to DDR.
207 Finally SPL transer control to u-boot for futher booting.
209 SPL has following features:
210 - Executes within 256K
211 - No relocation required
213 Run time view of SPL framework during boot :-
214 -----------------------------------------------
216 -----------------------------------------------
217 Secure boot | 0xFFFC0000 (32KB) |
219 -----------------------------------------------
220 GD, BD | 0xFFFC8000 (4KB) |
221 -----------------------------------------------
222 ENV | 0xFFFC9000 (8KB) |
223 -----------------------------------------------
224 HEAP | 0xFFFCB000 (30KB) |
225 -----------------------------------------------
226 STACK | 0xFFFD8000 (22KB) |
227 -----------------------------------------------
228 U-boot SPL | 0xFFFD8000 (160KB) |
229 -----------------------------------------------
231 NAND Flash memory Map on T104xRDB
232 ------------------------------------------
233 Start End Definition Size
234 0x000000 0x0FFFFF u-boot 1MB
235 0x180000 0x19FFFF u-boot env 128KB
236 0x280000 0x29FFFF FMAN Ucode 128KB
237 0x380000 0x39FFFF QE Firmware 128KB
239 SD Card memory Map on T104xRDB
240 ------------------------------------------
241 Block #blocks Definition Size
242 0x008 2048 u-boot 1MB
243 0x800 0024 u-boot env 8KB
244 0x820 0256 FMAN Ucode 128KB
245 0x920 0256 QE Firmware 128KB
247 SPI Flash memory Map on T104xRDB
248 ------------------------------------------
249 Start End Definition Size
250 0x000000 0x0FFFFF u-boot 1MB
251 0x100000 0x101FFF u-boot env 8KB
252 0x110000 0x12FFFF FMAN Ucode 128KB
253 0x130000 0x14FFFF QE Firmware 128KB
255 Please note QE Firmware is only valid for T1040RDB
258 Switch Settings: (ON is 0, OFF is 1)
260 NAND boot SW setting: