board/freescale/p2041rdb/cpld.c

   1 /**
   2  * Copyright 2011 Freescale Semiconductor
   3  * Author: Mingkai Hu <Mingkai.hu@freescale.com>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  *
   7  * This file provides support for the board-specific CPLD used on some Freescale
   8  * reference boards.
   9  *
  10  * The following macros need to be defined:
  11  *
  12  * CPLD_BASE - The virtual address of the base of the CPLD register map
  13  */
  14
  15 #include <common.h>
  16 #include <command.h>
  17 #include <asm/io.h>
  18
  19 #include "cpld.h"
  20
  21 static u8 __cpld_read(unsigned int reg)
  22 {
  23         void *p = (void *)CPLD_BASE;
  24
  25         return in_8(p + reg);
  26 }
  27 u8 cpld_read(unsigned int reg) __attribute__((weak, alias("__cpld_read")));
  28
  29 static void __cpld_write(unsigned int reg, u8 value)
  30 {
  31         void *p = (void *)CPLD_BASE;
  32
  33         out_8(p + reg, value);
  34 }
  35 void cpld_write(unsigned int reg, u8 value)
  36         __attribute__((weak, alias("__cpld_write")));
  37
  38 /*
  39  * Reset the board. This honors the por_cfg registers.
  40  */
  41 void __cpld_reset(void)
  42 {
  43         CPLD_WRITE(system_rst, 1);
  44 }
  45 void cpld_reset(void) __attribute__((weak, alias("__cpld_reset")));
  46
  47 /**
  48  * Set the boot bank to the alternate bank
  49  */
  50 void __cpld_set_altbank(void)
  51 {
  52         u8 reg5 = CPLD_READ(sw_ctl_on);
  53
  54         CPLD_WRITE(sw_ctl_on, reg5 | CPLD_SWITCH_BANK_ENABLE);
  55         CPLD_WRITE(fbank_sel, 1);
  56         CPLD_WRITE(system_rst, 1);
  57 }
  58 void cpld_set_altbank(void)
  59         __attribute__((weak, alias("__cpld_set_altbank")));
  60
  61 /**
  62  * Set the boot bank to the default bank
  63  */
  64 void __cpld_set_defbank(void)
  65 {
  66         CPLD_WRITE(system_rst_default, 1);
  67 }
  68 void cpld_set_defbank(void)
  69         __attribute__((weak, alias("__cpld_set_defbank")));
  70
  71 #ifdef DEBUG
  72 static void cpld_dump_regs(void)
  73 {
  74         printf("cpld_ver        = 0x%02x\n", CPLD_READ(cpld_ver));
  75         printf("cpld_ver_sub    = 0x%02x\n", CPLD_READ(cpld_ver_sub));
  76         printf("pcba_ver        = 0x%02x\n", CPLD_READ(pcba_ver));
  77         printf("system_rst      = 0x%02x\n", CPLD_READ(system_rst));
  78         printf("sw_ctl_on       = 0x%02x\n", CPLD_READ(sw_ctl_on));
  79         printf("por_cfg         = 0x%02x\n", CPLD_READ(por_cfg));
  80         printf("switch_strobe   = 0x%02x\n", CPLD_READ(switch_strobe));
  81         printf("jtag_sel        = 0x%02x\n", CPLD_READ(jtag_sel));
  82         printf("sdbank1_clk     = 0x%02x\n", CPLD_READ(sdbank1_clk));
  83         printf("sdbank2_clk     = 0x%02x\n", CPLD_READ(sdbank2_clk));
  84         printf("fbank_sel       = 0x%02x\n", CPLD_READ(fbank_sel));
  85         printf("serdes_mux      = 0x%02x\n", CPLD_READ(serdes_mux));
  86         printf("SW[2]           = 0x%02x\n", in_8(&CPLD_SW(2)));
  87         putc('\n');
  88 }
  89 #endif
  90
  91 int cpld_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
  92 {
  93         int rc = 0;
  94
  95         if (argc <= 1)
  96                 return cmd_usage(cmdtp);
  97
  98         if (strcmp(argv[1], "reset") == 0) {
  99                 if (strcmp(argv[2], "altbank") == 0)
 100                         cpld_set_altbank();
 101                 else
 102                         cpld_set_defbank();
 103         } else if (strcmp(argv[1], "lane_mux") == 0) {
 104                 u32 lane = simple_strtoul(argv[2], NULL, 16);
 105                 u8 val = (u8)simple_strtoul(argv[3], NULL, 16);
 106                 u8 reg = CPLD_READ(serdes_mux);
 107
 108                 switch (lane) {
 109                 case 0x6:
 110                         reg &= ~SERDES_MUX_LANE_6_MASK;
 111                         reg |= val << SERDES_MUX_LANE_6_SHIFT;
 112                         break;
 113                 case 0xa:
 114                         reg &= ~SERDES_MUX_LANE_A_MASK;
 115                         reg |= val << SERDES_MUX_LANE_A_SHIFT;
 116                         break;
 117                 case 0xc:
 118                         reg &= ~SERDES_MUX_LANE_C_MASK;
 119                         reg |= val << SERDES_MUX_LANE_C_SHIFT;
 120                         break;
 121                 case 0xd:
 122                         reg &= ~SERDES_MUX_LANE_D_MASK;
 123                         reg |= val << SERDES_MUX_LANE_D_SHIFT;
 124                         break;
 125                 default:
 126                         printf("Invalid value\n");
 127                         break;
 128                 }
 129
 130                 CPLD_WRITE(serdes_mux, reg);
 131 #ifdef DEBUG
 132         } else if (strcmp(argv[1], "dump") == 0) {
 133                 cpld_dump_regs();
 134 #endif
 135         } else
 136                 rc = cmd_usage(cmdtp);
 137
 138         return rc;
 139 }
 140
 141 U_BOOT_CMD(
 142         cpld_cmd, CONFIG_SYS_MAXARGS, 1, cpld_cmd,
 143         "Reset the board or pin mulexing selection using the CPLD sequencer",
 144         "reset - hard reset to default bank\n"
 145         "cpld_cmd reset altbank - reset to alternate bank\n"
 146         "cpld_cmd lane_mux <lane> <mux_value> - set multiplexed lane pin\n"
 147         "       lane 6: 0 -> slot1\n"
 148         "               1 -> SGMII (Default)\n"
 149         "       lane a: 0 -> slot2\n"
 150         "               1 -> AURORA (Default)\n"
 151         "       lane c: 0 -> slot2\n"
 152         "               1 -> SATA0 (Default)\n"
 153         "       lane d: 0 -> slot2\n"
 154         "               1 -> SATA1 (Default)\n"
 155 #ifdef DEBUG
 156         "cpld_cmd dump - display the CPLD registers\n"
 157 #endif
 158         );