2 * Copyright 2011 Freescale Semiconductor, Inc.
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License as
6 * published by the Free Software Foundation; either version 2 of
7 * the License, or (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26 #include <asm/fsl_law.h>
27 #include <asm/fsl_ddr_sdram.h>
28 #include <asm/global_data.h>
30 DECLARE_GLOBAL_DATA_PTR;
33 * Fixed sdram init -- doesn't use serial presence detect.
37 ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
39 __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
40 __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
41 #if CONFIG_CHIP_SELECTS_PER_CTRL > 1
42 __raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
43 __raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
45 __raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3);
46 __raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0);
47 __raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1);
48 __raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2);
50 __raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
51 __raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode);
52 __raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2);
54 __raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval);
55 __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
56 __raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl);
58 __raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
59 __raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
60 __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
61 __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl);
63 /* Set, but do not enable the memory */
64 __raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg);
66 asm volatile("sync;isync");
69 /* Let the controller go */
70 out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
72 set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1);
75 void board_init_f(ulong bootflag)
78 ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
80 ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
83 /* initialize selected port with appropriate baud rate */
84 plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
86 gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
88 NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
89 gd->bus_clk / 16 / CONFIG_BAUDRATE);
91 puts("\nNAND boot... ");
94 /* init DDR3 reset signal */
95 __raw_writel(0x02000000, &pgpio->gpdir);
96 __raw_writel(0x00200000, &pgpio->gpodr);
97 __raw_writel(0x00000000, &pgpio->gpdat);
99 __raw_writel(0x00200000, &pgpio->gpdat);
101 __raw_writel(0x00000000, &pgpio->gpdir);
104 /* Initialize the DDR3 */
107 /* copy code to RAM and jump to it - this should not return */
108 /* NOTE - code has to be copied out of NAND buffer before
109 * other blocks can be read.
111 relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
114 void board_init_r(gd_t *gd, ulong dest_addr)
122 NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
124 NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
127 void puts(const char *str)