board/freescale/mx51evk/mx51evk.c

   1 /*
   2  * (C) Copyright 2009 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #include <common.h>
  24 #include <asm/io.h>
  25 #include <asm/gpio.h>
  26 #include <asm/arch/imx-regs.h>
  27 #include <asm/arch/mx5x_pins.h>
  28 #include <asm/arch/iomux.h>
  29 #include <asm/errno.h>
  30 #include <asm/arch/sys_proto.h>
  31 #include <asm/arch/crm_regs.h>
  32 #include <i2c.h>
  33 #include <mmc.h>
  34 #include <fsl_esdhc.h>
  35 #include <pmic.h>
  36 #include <fsl_pmic.h>
  37 #include <mc13892.h>
  38 #include <usb/ehci-fsl.h>
  39
  40 DECLARE_GLOBAL_DATA_PTR;
  41
  42 #ifdef CONFIG_FSL_ESDHC
  43 struct fsl_esdhc_cfg esdhc_cfg[2] = {
  44         {MMC_SDHC1_BASE_ADDR, 1},
  45         {MMC_SDHC2_BASE_ADDR, 1},
  46 };
  47 #endif
  48
  49 int dram_init(void)
  50 {
  51         /* dram_init must store complete ramsize in gd->ram_size */
  52         gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
  53                                 PHYS_SDRAM_1_SIZE);
  54         return 0;
  55 }
  56
  57 static void setup_iomux_uart(void)
  58 {
  59         unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
  60                         PAD_CTL_PUE_PULL | PAD_CTL_DRV_HIGH;
  61
  62         mxc_request_iomux(MX51_PIN_UART1_RXD, IOMUX_CONFIG_ALT0);
  63         mxc_iomux_set_pad(MX51_PIN_UART1_RXD, pad | PAD_CTL_SRE_FAST);
  64         mxc_request_iomux(MX51_PIN_UART1_TXD, IOMUX_CONFIG_ALT0);
  65         mxc_iomux_set_pad(MX51_PIN_UART1_TXD, pad | PAD_CTL_SRE_FAST);
  66         mxc_request_iomux(MX51_PIN_UART1_RTS, IOMUX_CONFIG_ALT0);
  67         mxc_iomux_set_pad(MX51_PIN_UART1_RTS, pad);
  68         mxc_request_iomux(MX51_PIN_UART1_CTS, IOMUX_CONFIG_ALT0);
  69         mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
  70 }
  71
  72 static void setup_iomux_fec(void)
  73 {
  74         /*FEC_MDIO*/
  75         mxc_request_iomux(MX51_PIN_EIM_EB2 , IOMUX_CONFIG_ALT3);
  76         mxc_iomux_set_pad(MX51_PIN_EIM_EB2 , 0x1FD);
  77
  78         /*FEC_MDC*/
  79         mxc_request_iomux(MX51_PIN_NANDF_CS3, IOMUX_CONFIG_ALT2);
  80         mxc_iomux_set_pad(MX51_PIN_NANDF_CS3, 0x2004);
  81
  82         /* FEC RDATA[3] */
  83         mxc_request_iomux(MX51_PIN_EIM_CS3, IOMUX_CONFIG_ALT3);
  84         mxc_iomux_set_pad(MX51_PIN_EIM_CS3, 0x180);
  85
  86         /* FEC RDATA[2] */
  87         mxc_request_iomux(MX51_PIN_EIM_CS2, IOMUX_CONFIG_ALT3);
  88         mxc_iomux_set_pad(MX51_PIN_EIM_CS2, 0x180);
  89
  90         /* FEC RDATA[1] */
  91         mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT3);
  92         mxc_iomux_set_pad(MX51_PIN_EIM_EB3, 0x180);
  93
  94         /* FEC RDATA[0] */
  95         mxc_request_iomux(MX51_PIN_NANDF_D9, IOMUX_CONFIG_ALT2);
  96         mxc_iomux_set_pad(MX51_PIN_NANDF_D9, 0x2180);
  97
  98         /* FEC TDATA[3] */
  99         mxc_request_iomux(MX51_PIN_NANDF_CS6, IOMUX_CONFIG_ALT2);
 100         mxc_iomux_set_pad(MX51_PIN_NANDF_CS6, 0x2004);
 101
 102         /* FEC TDATA[2] */
 103         mxc_request_iomux(MX51_PIN_NANDF_CS5, IOMUX_CONFIG_ALT2);
 104         mxc_iomux_set_pad(MX51_PIN_NANDF_CS5, 0x2004);
 105
 106         /* FEC TDATA[1] */
 107         mxc_request_iomux(MX51_PIN_NANDF_CS4, IOMUX_CONFIG_ALT2);
 108         mxc_iomux_set_pad(MX51_PIN_NANDF_CS4, 0x2004);
 109
 110         /* FEC TDATA[0] */
 111         mxc_request_iomux(MX51_PIN_NANDF_D8, IOMUX_CONFIG_ALT2);
 112         mxc_iomux_set_pad(MX51_PIN_NANDF_D8, 0x2004);
 113
 114         /* FEC TX_EN */
 115         mxc_request_iomux(MX51_PIN_NANDF_CS7, IOMUX_CONFIG_ALT1);
 116         mxc_iomux_set_pad(MX51_PIN_NANDF_CS7, 0x2004);
 117
 118         /* FEC TX_ER */
 119         mxc_request_iomux(MX51_PIN_NANDF_CS2, IOMUX_CONFIG_ALT2);
 120         mxc_iomux_set_pad(MX51_PIN_NANDF_CS2, 0x2004);
 121
 122         /* FEC TX_CLK */
 123         mxc_request_iomux(MX51_PIN_NANDF_RDY_INT, IOMUX_CONFIG_ALT1);
 124         mxc_iomux_set_pad(MX51_PIN_NANDF_RDY_INT, 0x2180);
 125
 126         /* FEC TX_COL */
 127         mxc_request_iomux(MX51_PIN_NANDF_RB2, IOMUX_CONFIG_ALT1);
 128         mxc_iomux_set_pad(MX51_PIN_NANDF_RB2, 0x2180);
 129
 130         /* FEC RX_CLK */
 131         mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_ALT1);
 132         mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, 0x2180);
 133
 134         /* FEC RX_CRS */
 135         mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT3);
 136         mxc_iomux_set_pad(MX51_PIN_EIM_CS5, 0x180);
 137
 138         /* FEC RX_ER */
 139         mxc_request_iomux(MX51_PIN_EIM_CS4, IOMUX_CONFIG_ALT3);
 140         mxc_iomux_set_pad(MX51_PIN_EIM_CS4, 0x180);
 141
 142         /* FEC RX_DV */
 143         mxc_request_iomux(MX51_PIN_NANDF_D11, IOMUX_CONFIG_ALT2);
 144         mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
 145 }
 146
 147 #ifdef CONFIG_MXC_SPI
 148 static void setup_iomux_spi(void)
 149 {
 150         /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
 151         mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
 152         mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105);
 153
 154         /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
 155         mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
 156         mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105);
 157
 158         /* de-select SS1 of instance: ecspi1. */
 159         mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
 160         mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85);
 161
 162         /* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */
 163         mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
 164         mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185);
 165
 166         /* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */
 167         mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
 168         mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180);
 169
 170         /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
 171         mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
 172         mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105);
 173 }
 174 #endif
 175
 176 #ifdef CONFIG_USB_EHCI_MX5
 177 #define MX51EVK_USBH1_HUB_RST   IOMUX_TO_GPIO(MX51_PIN_GPIO1_7) /* GPIO1_7 */
 178 #define MX51EVK_USBH1_STP       IOMUX_TO_GPIO(MX51_PIN_USBH1_STP) /* GPIO1_27 */
 179 #define MX51EVK_USB_CLK_EN_B    IOMUX_TO_GPIO(MX51_PIN_EIM_D18) /* GPIO2_1 */
 180 #define MX51EVK_USB_PHY_RESET   IOMUX_TO_GPIO(MX51_PIN_EIM_D21) /* GPIO2_5 */
 181
 182 #define USBH1_PAD       (PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |          \
 183                          PAD_CTL_100K_PU | PAD_CTL_PUE_PULL |           \
 184                          PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE)
 185 #define GPIO_PAD        (PAD_CTL_DRV_HIGH | PAD_CTL_PKE_ENABLE |        \
 186                          PAD_CTL_SRE_FAST)
 187 #define NO_PAD          (1 << 16)
 188
 189 static void setup_usb_h1(void)
 190 {
 191         setup_iomux_usb_h1();
 192
 193         /* GPIO_1_7 for USBH1 hub reset */
 194         mxc_request_iomux(MX51_PIN_GPIO1_7, IOMUX_CONFIG_ALT0);
 195         mxc_iomux_set_pad(MX51_PIN_GPIO1_7, NO_PAD);
 196
 197         /* GPIO_2_1 */
 198         mxc_request_iomux(MX51_PIN_EIM_D17, IOMUX_CONFIG_ALT1);
 199         mxc_iomux_set_pad(MX51_PIN_EIM_D17, GPIO_PAD);
 200
 201         /* GPIO_2_5 for USB PHY reset */
 202         mxc_request_iomux(MX51_PIN_EIM_D21, IOMUX_CONFIG_ALT1);
 203         mxc_iomux_set_pad(MX51_PIN_EIM_D21, GPIO_PAD);
 204 }
 205
 206 int board_ehci_hcd_init(int port)
 207 {
 208         /* Set USBH1_STP to GPIO and toggle it */
 209         mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_GPIO);
 210         mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD);
 211
 212         gpio_direction_output(MX51EVK_USBH1_STP, 0);
 213         gpio_direction_output(MX51EVK_USB_PHY_RESET, 0);
 214         mdelay(10);
 215         gpio_set_value(MX51EVK_USBH1_STP, 1);
 216
 217         /* Set back USBH1_STP to be function */
 218         mxc_request_iomux(MX51_PIN_USBH1_STP, IOMUX_CONFIG_ALT0);
 219         mxc_iomux_set_pad(MX51_PIN_USBH1_STP, USBH1_PAD);
 220
 221         /* De-assert USB PHY RESETB */
 222         gpio_set_value(MX51EVK_USB_PHY_RESET, 1);
 223
 224         /* Drive USB_CLK_EN_B line low */
 225         gpio_direction_output(MX51EVK_USB_CLK_EN_B, 0);
 226
 227         /* Reset USB hub */
 228         gpio_direction_output(MX51EVK_USBH1_HUB_RST, 0);
 229         mdelay(2);
 230         gpio_set_value(MX51EVK_USBH1_HUB_RST, 1);
 231         return 0;
 232 }
 233 #endif
 234
 235 static void power_init(void)
 236 {
 237         unsigned int val;
 238         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
 239         struct pmic *p;
 240
 241         pmic_init();
 242         p = get_pmic();
 243
 244         /* Write needed to Power Gate 2 register */
 245         pmic_reg_read(p, REG_POWER_MISC, &val);
 246         val &= ~PWGT2SPIEN;
 247         pmic_reg_write(p, REG_POWER_MISC, val);
 248
 249         /* Externally powered */
 250         pmic_reg_read(p, REG_CHARGE, &val);
 251         val |= ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | CHGAUTOB;
 252         pmic_reg_write(p, REG_CHARGE, val);
 253
 254         /* power up the system first */
 255         pmic_reg_write(p, REG_POWER_MISC, PWUP);
 256
 257         /* Set core voltage to 1.1V */
 258         pmic_reg_read(p, REG_SW_0, &val);
 259         val = (val & ~SWx_VOLT_MASK) | SWx_1_100V;
 260         pmic_reg_write(p, REG_SW_0, val);
 261
 262         /* Setup VCC (SW2) to 1.25 */
 263         pmic_reg_read(p, REG_SW_1, &val);
 264         val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
 265         pmic_reg_write(p, REG_SW_1, val);
 266
 267         /* Setup 1V2_DIG1 (SW3) to 1.25 */
 268         pmic_reg_read(p, REG_SW_2, &val);
 269         val = (val & ~SWx_VOLT_MASK) | SWx_1_250V;
 270         pmic_reg_write(p, REG_SW_2, val);
 271         udelay(50);
 272
 273         /* Raise the core frequency to 800MHz */
 274         writel(0x0, &mxc_ccm->cacrr);
 275
 276         /* Set switchers in Auto in NORMAL mode & STANDBY mode */
 277         /* Setup the switcher mode for SW1 & SW2*/
 278         pmic_reg_read(p, REG_SW_4, &val);
 279         val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
 280                 (SWMODE_MASK << SWMODE2_SHIFT)));
 281         val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
 282                 (SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
 283         pmic_reg_write(p, REG_SW_4, val);
 284
 285         /* Setup the switcher mode for SW3 & SW4 */
 286         pmic_reg_read(p, REG_SW_5, &val);
 287         val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) |
 288                 (SWMODE_MASK << SWMODE4_SHIFT)));
 289         val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) |
 290                 (SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
 291         pmic_reg_write(p, REG_SW_5, val);
 292
 293         /* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */
 294         pmic_reg_read(p, REG_SETTING_0, &val);
 295         val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK);
 296         val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6;
 297         pmic_reg_write(p, REG_SETTING_0, val);
 298
 299         /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
 300         pmic_reg_read(p, REG_SETTING_1, &val);
 301         val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
 302         val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775;
 303         pmic_reg_write(p, REG_SETTING_1, val);
 304
 305         /* Configure VGEN3 and VCAM regulators to use external PNP */
 306         val = VGEN3CONFIG | VCAMCONFIG;
 307         pmic_reg_write(p, REG_MODE_1, val);
 308         udelay(200);
 309
 310         /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
 311         val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
 312                 VVIDEOEN | VAUDIOEN  | VSDEN;
 313         pmic_reg_write(p, REG_MODE_1, val);
 314
 315         mxc_request_iomux(MX51_PIN_EIM_A20, IOMUX_CONFIG_ALT1);
 316         gpio_direction_output(46, 0);
 317
 318         udelay(500);
 319
 320         gpio_set_value(46, 1);
 321 }
 322
 323 #ifdef CONFIG_FSL_ESDHC
 324 int board_mmc_getcd(struct mmc *mmc)
 325 {
 326         struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 327         int ret;
 328
 329         mxc_request_iomux(MX51_PIN_GPIO1_0, IOMUX_CONFIG_ALT1);
 330         mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
 331
 332         if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
 333                 ret = !gpio_get_value(0);
 334         else
 335                 ret = !gpio_get_value(6);
 336
 337         return ret;
 338 }
 339
 340 int board_mmc_init(bd_t *bis)
 341 {
 342         u32 index;
 343         s32 status = 0;
 344
 345         for (index = 0; index < CONFIG_SYS_FSL_ESDHC_NUM;
 346                         index++) {
 347                 switch (index) {
 348                 case 0:
 349                         mxc_request_iomux(MX51_PIN_SD1_CMD,
 350                                 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 351                         mxc_request_iomux(MX51_PIN_SD1_CLK,
 352                                 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 353                         mxc_request_iomux(MX51_PIN_SD1_DATA0,
 354                                 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 355                         mxc_request_iomux(MX51_PIN_SD1_DATA1,
 356                                 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 357                         mxc_request_iomux(MX51_PIN_SD1_DATA2,
 358                                 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 359                         mxc_request_iomux(MX51_PIN_SD1_DATA3,
 360                                 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 361                         mxc_iomux_set_pad(MX51_PIN_SD1_CMD,
 362                                 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 363                                 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
 364                                 PAD_CTL_PUE_PULL |
 365                                 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 366                         mxc_iomux_set_pad(MX51_PIN_SD1_CLK,
 367                                 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 368                                 PAD_CTL_HYS_NONE | PAD_CTL_47K_PU |
 369                                 PAD_CTL_PUE_PULL |
 370                                 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 371                         mxc_iomux_set_pad(MX51_PIN_SD1_DATA0,
 372                                 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 373                                 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
 374                                 PAD_CTL_PUE_PULL |
 375                                 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 376                         mxc_iomux_set_pad(MX51_PIN_SD1_DATA1,
 377                                 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 378                                 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
 379                                 PAD_CTL_PUE_PULL |
 380                                 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 381                         mxc_iomux_set_pad(MX51_PIN_SD1_DATA2,
 382                                 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 383                                 PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU |
 384                                 PAD_CTL_PUE_PULL |
 385                                 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 386                         mxc_iomux_set_pad(MX51_PIN_SD1_DATA3,
 387                                 PAD_CTL_DRV_MAX | PAD_CTL_DRV_VOT_HIGH |
 388                                 PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PD |
 389                                 PAD_CTL_PUE_PULL |
 390                                 PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST);
 391                         mxc_request_iomux(MX51_PIN_GPIO1_0,
 392                                 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 393                         mxc_iomux_set_pad(MX51_PIN_GPIO1_0,
 394                                 PAD_CTL_HYS_ENABLE);
 395                         mxc_request_iomux(MX51_PIN_GPIO1_1,
 396                                 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 397                         mxc_iomux_set_pad(MX51_PIN_GPIO1_1,
 398                                 PAD_CTL_HYS_ENABLE);
 399                         break;
 400                 case 1:
 401                         mxc_request_iomux(MX51_PIN_SD2_CMD,
 402                                 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 403                         mxc_request_iomux(MX51_PIN_SD2_CLK,
 404                                 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 405                         mxc_request_iomux(MX51_PIN_SD2_DATA0,
 406                                 IOMUX_CONFIG_ALT0);
 407                         mxc_request_iomux(MX51_PIN_SD2_DATA1,
 408                                 IOMUX_CONFIG_ALT0);
 409                         mxc_request_iomux(MX51_PIN_SD2_DATA2,
 410                                 IOMUX_CONFIG_ALT0);
 411                         mxc_request_iomux(MX51_PIN_SD2_DATA3,
 412                                 IOMUX_CONFIG_ALT0);
 413                         mxc_iomux_set_pad(MX51_PIN_SD2_CMD,
 414                                 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
 415                                 PAD_CTL_SRE_FAST);
 416                         mxc_iomux_set_pad(MX51_PIN_SD2_CLK,
 417                                 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
 418                                 PAD_CTL_SRE_FAST);
 419                         mxc_iomux_set_pad(MX51_PIN_SD2_DATA0,
 420                                 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
 421                                 PAD_CTL_SRE_FAST);
 422                         mxc_iomux_set_pad(MX51_PIN_SD2_DATA1,
 423                                 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
 424                                 PAD_CTL_SRE_FAST);
 425                         mxc_iomux_set_pad(MX51_PIN_SD2_DATA2,
 426                                 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
 427                                 PAD_CTL_SRE_FAST);
 428                         mxc_iomux_set_pad(MX51_PIN_SD2_DATA3,
 429                                 PAD_CTL_DRV_MAX | PAD_CTL_22K_PU |
 430                                 PAD_CTL_SRE_FAST);
 431                         mxc_request_iomux(MX51_PIN_SD2_CMD,
 432                                 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 433                         mxc_request_iomux(MX51_PIN_GPIO1_6,
 434                                 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 435                         mxc_iomux_set_pad(MX51_PIN_GPIO1_6,
 436                                 PAD_CTL_HYS_ENABLE);
 437                         mxc_request_iomux(MX51_PIN_GPIO1_5,
 438                                 IOMUX_CONFIG_ALT0 | IOMUX_CONFIG_SION);
 439                         mxc_iomux_set_pad(MX51_PIN_GPIO1_5,
 440                                 PAD_CTL_HYS_ENABLE);
 441                         break;
 442                 default:
 443                         printf("Warning: you configured more ESDHC controller"
 444                                 "(%d) as supported by the board(2)\n",
 445                                 CONFIG_SYS_FSL_ESDHC_NUM);
 446                         return status;
 447                 }
 448                 status |= fsl_esdhc_initialize(bis, &esdhc_cfg[index]);
 449         }
 450         return status;
 451 }
 452 #endif
 453
 454 int board_early_init_f(void)
 455 {
 456         setup_iomux_uart();
 457         setup_iomux_fec();
 458 #ifdef CONFIG_USB_EHCI_MX5
 459         setup_usb_h1();
 460 #endif
 461
 462         return 0;
 463 }
 464
 465 int board_init(void)
 466 {
 467         /* address of boot parameters */
 468         gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 469
 470         return 0;
 471 }
 472
 473 #ifdef CONFIG_BOARD_LATE_INIT
 474 int board_late_init(void)
 475 {
 476 #ifdef CONFIG_MXC_SPI
 477         setup_iomux_spi();
 478         power_init();
 479 #endif
 480         return 0;
 481 }
 482 #endif
 483
 484 int checkboard(void)
 485 {
 486         puts("Board: MX51EVK\n");
 487
 488         return 0;
 489 }