2 * Copyright 2007-2008 Freescale Semiconductor, Inc.
4 * See file CREDITS for list of people who contributed to this
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26 #include <asm/processor.h>
28 #include <asm/immap_85xx.h>
29 #include <asm/immap_fsl_pci.h>
30 #include <asm/fsl_ddr_sdram.h>
34 #include <fdt_support.h>
36 #include "../common/pixis.h"
38 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
39 extern void ddr_enable_ecc(unsigned int dram_size);
42 long int fixed_sdram(void);
46 printf ("Board: MPC8572DS, System ID: 0x%02x, "
47 "System Version: 0x%02x, FPGA Version: 0x%02x\n",
48 in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
49 in8(PIXIS_BASE + PIXIS_PVER));
53 phys_size_t initdram(int board_type)
55 phys_size_t dram_size = 0;
57 puts("Initializing....");
59 #ifdef CONFIG_SPD_EEPROM
60 dram_size = fsl_ddr_sdram();
62 dram_size = setup_ddr_tlbs(dram_size / 0x100000);
64 dram_size *= 0x100000;
66 dram_size = fixed_sdram();
69 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
71 * Initialize and enable DDR ECC.
73 ddr_enable_ecc(dram_size);
79 #if !defined(CONFIG_SPD_EEPROM)
81 * Fixed sdram init -- doesn't use serial presence detect.
84 phys_size_t fixed_sdram (void)
86 volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
87 volatile ccsr_ddr_t *ddr= &immap->im_ddr;
90 ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
91 ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
93 ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
94 ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
95 ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
96 ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
97 ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
98 ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
99 ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
100 ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
101 ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
102 ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
104 #if defined (CONFIG_DDR_ECC)
105 ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
106 ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
107 ddr->err_sbe = CONFIG_SYS_DDR_SBE;
113 ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
115 #if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
117 debug("DDR - 1st controller: memory initializing\n");
119 * Poll until memory is initialized.
120 * 512 Meg at 400 might hit this 200 times or so.
122 while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
125 debug("DDR: memory initialized\n\n");
130 return 512 * 1024 * 1024;
136 static struct pci_controller pcie1_hose;
140 static struct pci_controller pcie2_hose;
144 static struct pci_controller pcie3_hose;
147 int first_free_busno=0;
149 void pci_init_board(void)
151 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
152 uint devdisr = gur->devdisr;
153 uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
154 uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
156 debug (" pci_init_board: devdisr=%x, io_sel=%x, host_agent=%x\n",
157 devdisr, io_sel, host_agent);
159 if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII1_DIS))
160 printf (" eTSEC1 is in sgmii mode.\n");
161 if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII2_DIS))
162 printf (" eTSEC2 is in sgmii mode.\n");
163 if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII3_DIS))
164 printf (" eTSEC3 is in sgmii mode.\n");
165 if (!(gur->pordevsr & MPC85xx_PORDEVSR_SGMII4_DIS))
166 printf (" eTSEC4 is in sgmii mode.\n");
171 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
172 extern void fsl_pci_init(struct pci_controller *hose);
173 struct pci_controller *hose = &pcie3_hose;
174 int pcie_ep = (host_agent == 0) || (host_agent == 3) ||
175 (host_agent == 5) || (host_agent == 6);
176 int pcie_configured = io_sel >= 1;
179 if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
180 printf ("\n PCIE3 connected to ULI as %s (base address %x)",
181 pcie_ep ? "End Point" : "Root Complex",
183 if (pci->pme_msg_det) {
184 pci->pme_msg_det = 0xffffffff;
185 debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
190 pci_set_region(hose->regions + 0,
191 CONFIG_SYS_PCI_MEMORY_BUS,
192 CONFIG_SYS_PCI_MEMORY_PHYS,
193 CONFIG_SYS_PCI_MEMORY_SIZE,
194 PCI_REGION_MEM | PCI_REGION_MEMORY);
196 /* outbound memory */
197 pci_set_region(hose->regions + 1,
198 CONFIG_SYS_PCIE3_MEM_BASE,
199 CONFIG_SYS_PCIE3_MEM_PHYS,
200 CONFIG_SYS_PCIE3_MEM_SIZE,
204 pci_set_region(hose->regions + 2,
205 CONFIG_SYS_PCIE3_IO_BASE,
206 CONFIG_SYS_PCIE3_IO_PHYS,
207 CONFIG_SYS_PCIE3_IO_SIZE,
210 hose->region_count = 3;
211 hose->first_busno=first_free_busno;
212 pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
216 first_free_busno=hose->last_busno+1;
217 printf (" PCIE3 on bus %02x - %02x\n",
218 hose->first_busno,hose->last_busno);
221 * Activate ULI1575 legacy chip by performing a fake
222 * memory access. Needed to make ULI RTC work.
223 * Device 1d has the first on-board memory BAR.
226 pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0 ),
227 PCI_BASE_ADDRESS_1, &temp32);
228 if (temp32 >= CONFIG_SYS_PCIE3_MEM_PHYS) {
229 debug(" uli1572 read to %x\n", temp32);
230 in_be32((unsigned *)temp32);
233 printf (" PCIE3: disabled\n");
238 gur->devdisr |= MPC85xx_DEVDISR_PCIE3; /* disable */
243 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
244 extern void fsl_pci_init(struct pci_controller *hose);
245 struct pci_controller *hose = &pcie2_hose;
246 int pcie_ep = (host_agent == 2) || (host_agent == 4) ||
248 int pcie_configured = io_sel & 4;
250 if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
251 printf ("\n PCIE2 connected to Slot 1 as %s (base address %x)",
252 pcie_ep ? "End Point" : "Root Complex",
254 if (pci->pme_msg_det) {
255 pci->pme_msg_det = 0xffffffff;
256 debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
261 pci_set_region(hose->regions + 0,
262 CONFIG_SYS_PCI_MEMORY_BUS,
263 CONFIG_SYS_PCI_MEMORY_PHYS,
264 CONFIG_SYS_PCI_MEMORY_SIZE,
265 PCI_REGION_MEM | PCI_REGION_MEMORY);
267 /* outbound memory */
268 pci_set_region(hose->regions + 1,
269 CONFIG_SYS_PCIE2_MEM_BASE,
270 CONFIG_SYS_PCIE2_MEM_PHYS,
271 CONFIG_SYS_PCIE2_MEM_SIZE,
275 pci_set_region(hose->regions + 2,
276 CONFIG_SYS_PCIE2_IO_BASE,
277 CONFIG_SYS_PCIE2_IO_PHYS,
278 CONFIG_SYS_PCIE2_IO_SIZE,
281 hose->region_count = 3;
282 hose->first_busno=first_free_busno;
283 pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
286 first_free_busno=hose->last_busno+1;
287 printf (" PCIE2 on bus %02x - %02x\n",
288 hose->first_busno,hose->last_busno);
291 printf (" PCIE2: disabled\n");
296 gur->devdisr |= MPC85xx_DEVDISR_PCIE2; /* disable */
300 volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
301 extern void fsl_pci_init(struct pci_controller *hose);
302 struct pci_controller *hose = &pcie1_hose;
303 int pcie_ep = (host_agent == 1) || (host_agent == 4) ||
305 int pcie_configured = io_sel & 6;
307 if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
308 printf ("\n PCIE1 connected to Slot 2 as %s (base address %x)",
309 pcie_ep ? "End Point" : "Root Complex",
311 if (pci->pme_msg_det) {
312 pci->pme_msg_det = 0xffffffff;
313 debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
318 pci_set_region(hose->regions + 0,
319 CONFIG_SYS_PCI_MEMORY_BUS,
320 CONFIG_SYS_PCI_MEMORY_PHYS,
321 CONFIG_SYS_PCI_MEMORY_SIZE,
322 PCI_REGION_MEM | PCI_REGION_MEMORY);
324 /* outbound memory */
325 pci_set_region(hose->regions + 1,
326 CONFIG_SYS_PCIE1_MEM_BASE,
327 CONFIG_SYS_PCIE1_MEM_PHYS,
328 CONFIG_SYS_PCIE1_MEM_SIZE,
332 pci_set_region(hose->regions + 2,
333 CONFIG_SYS_PCIE1_IO_BASE,
334 CONFIG_SYS_PCIE1_IO_PHYS,
335 CONFIG_SYS_PCIE1_IO_SIZE,
338 hose->region_count = 3;
339 hose->first_busno=first_free_busno;
341 pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
345 first_free_busno=hose->last_busno+1;
346 printf(" PCIE1 on bus %02x - %02x\n",
347 hose->first_busno,hose->last_busno);
350 printf (" PCIE1: disabled\n");
355 gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
360 int board_early_init_r(void)
363 const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
364 const u8 flash_esel = 2;
367 * Remap Boot flash + PROMJET region to caching-inhibited
368 * so that flash can be erased properly.
371 /* Invalidate any remaining lines of the flash from caches. */
372 for (i = 0; i < 256*1024*1024; i+=32) {
373 asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i));
374 asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i));
377 /* invalidate existing TLB entry for flash + promjet */
378 disable_tlb(flash_esel);
380 set_tlb(1, flashbase, flashbase, /* tlb, epn, rpn */
381 MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
382 0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */
387 #ifdef CONFIG_GET_CLK_FROM_ICS307
388 /* decode S[0-2] to Output Divider (OD) */
389 static unsigned char ics307_S_to_OD[] = {
390 10, 2, 8, 4, 5, 7, 3, 6
393 /* Calculate frequency being generated by ICS307-02 clock chip based upon
394 * the control bytes being programmed into it. */
395 /* XXX: This function should probably go into a common library */
397 ics307_clk_freq (unsigned char cw0, unsigned char cw1, unsigned char cw2)
399 const unsigned long InputFrequency = CONFIG_ICS307_REFCLK_HZ;
400 unsigned long VDW = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
401 unsigned long RDW = cw2 & 0x7F;
402 unsigned long OD = ics307_S_to_OD[cw0 & 0x7];
405 /* CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) */
407 /* cw0: C1 C0 TTL F1 F0 S2 S1 S0
408 * cw1: V8 V7 V6 V5 V4 V3 V2 V1
409 * cw2: V0 R6 R5 R4 R3 R2 R1 R0
411 * R6:R0 = Reference Divider Word (RDW)
412 * V8:V0 = VCO Divider Word (VDW)
413 * S2:S0 = Output Divider Select (OD)
414 * F1:F0 = Function of CLK2 Output
416 * C1:C0 = internal load capacitance for cyrstal
419 /* Adding 1 to get a "nicely" rounded number, but this needs
420 * more tweaking to get a "properly" rounded number. */
422 freq = 1 + (InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD));
424 debug("ICS307: CW[0-2]: %02X %02X %02X => %u Hz\n", cw0, cw1, cw2,
429 unsigned long get_board_sys_clk(ulong dummy)
431 return ics307_clk_freq (
432 in8(PIXIS_BASE + PIXIS_VSYSCLK0),
433 in8(PIXIS_BASE + PIXIS_VSYSCLK1),
434 in8(PIXIS_BASE + PIXIS_VSYSCLK2)
438 unsigned long get_board_ddr_clk(ulong dummy)
440 return ics307_clk_freq (
441 in8(PIXIS_BASE + PIXIS_VDDRCLK0),
442 in8(PIXIS_BASE + PIXIS_VDDRCLK1),
443 in8(PIXIS_BASE + PIXIS_VDDRCLK2)
447 unsigned long get_board_sys_clk(ulong dummy)
452 i = in8(PIXIS_BASE + PIXIS_SPD);
485 unsigned long get_board_ddr_clk(ulong dummy)
490 i = in8(PIXIS_BASE + PIXIS_SPD);
524 #if defined(CONFIG_OF_BOARD_SETUP)
525 void ft_board_setup(void *blob, bd_t *bd)
531 ft_cpu_setup(blob, bd);
533 base = getenv_bootm_low();
534 size = getenv_bootm_size();
536 fdt_fixup_memory(blob, (u64)base, (u64)size);
538 node = fdt_path_offset(blob, "/aliases");
542 path = fdt_getprop(blob, node, "pci0", NULL);
544 tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
545 do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
549 path = fdt_getprop(blob, node, "pci1", NULL);
551 tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
552 do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
556 path = fdt_getprop(blob, node, "pci2", NULL);
558 tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
559 do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
567 extern void cpu_mp_lmb_reserve(struct lmb *lmb);
569 void board_lmb_reserve(struct lmb *lmb)
571 cpu_mp_lmb_reserve(lmb);