1 // SPDX-License-Identifier: GPL-2.0+
3 * (C) Copyright 2000-2003
4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
6 * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
7 * Hayden Fraser (Hayden.Fraser@freescale.com)
11 #include <asm/immap.h>
15 DECLARE_GLOBAL_DATA_PTR;
20 puts("Freescale MCF5253 DEMO\n");
29 * Check to see if the SDRAM has already been initialized
30 * by a run control tool
32 if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) {
35 RC = (CONFIG_SYS_CLK / 1000000) >> 1;
38 /* Initialize DRAM Control Register: DCR */
39 mbar_writeShort(MCFSIM_DCR, (0x8400 | RC));
42 mbar_writeLong(MCFSIM_DACR0, 0x00003224);
46 dramsize = (CONFIG_SYS_SDRAM_SIZE << 20);
47 temp = (dramsize - 1) & 0xFFFC0000;
48 mbar_writeLong(MCFSIM_DMR0, temp | 1);
51 mbar_writeLong(MCFSIM_DACR0, 0x0000322c);
55 /* Write to this block to initiate precharge */
56 *(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xa5a5a5a5;
60 /* Set RE bit in DACR */
61 mbar_writeLong(MCFSIM_DACR0,
62 mbar_readLong(MCFSIM_DACR0) | 0x8000);
65 /* Wait for at least 8 auto refresh cycles to occur */
68 /* Finish the configuration by issuing the MRS */
69 mbar_writeLong(MCFSIM_DACR0,
70 mbar_readLong(MCFSIM_DACR0) | 0x0040);
73 *(u32 *) (CONFIG_SYS_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
77 gd->ram_size = dramsize;
84 /* TODO: XXX XXX XXX */
85 printf("DRAM test not implemented!\n");
97 void ide_set_reset(int idereset)
99 atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR;
101 /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */
102 int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */
103 {50, 125, 45, 20, 35, 5, 15, 0, 35}, /* PIO 1 */
104 {30, 100, 30, 15, 20, 5, 10, 0, 35}, /* PIO 2 */
105 {30, 80, 30, 10, 20, 5, 10, 0, 35}, /* PIO 3 */
106 {25, 70, 20, 10, 20, 5, 10, 0, 35} /* PIO 4 */
114 mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
116 #define CALC_TIMING(t) (t + period - 1) / period
117 period = 1000000000 / (CONFIG_SYS_CLK / 2); /* period in ns */
119 /*ata->ton = CALC_TIMING (180); */
120 out_8(&ata->t1, CALC_TIMING(piotms[2][0]));
121 out_8(&ata->t2w, CALC_TIMING(piotms[2][1]));
122 out_8(&ata->t2r, CALC_TIMING(piotms[2][1]));
123 out_8(&ata->ta, CALC_TIMING(piotms[2][8]));
124 out_8(&ata->trd, CALC_TIMING(piotms[2][7]));
125 out_8(&ata->t4, CALC_TIMING(piotms[2][3]));
126 out_8(&ata->t9, CALC_TIMING(piotms[2][6]));
129 out_8(&ata->cr, 0x40);
132 setbits_8(&ata->cr, 0x01);
135 #endif /* CONFIG_IDE */
138 #ifdef CONFIG_DRIVER_DM9000
139 int board_eth_init(bd_t *bis)
141 return dm9000_initialize(bis);