board/compulab/cm_t54/cm_t54.c

   1 /*
   2  * Board functions for Compulab CM-T54 board
   3  *
   4  * Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
   5  *
   6  * Author: Dmitry Lifshitz <lifshitz@compulab.co.il>
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #include <common.h>
  12 #include <fdt_support.h>
  13 #include <usb.h>
  14 #include <mmc.h>
  15 #include <palmas.h>
  16 #include <spl.h>
  17
  18 #include <asm/gpio.h>
  19 #include <asm/arch/sys_proto.h>
  20 #include <asm/arch/mmc_host_def.h>
  21 #include <asm/arch/clock.h>
  22 #include <asm/arch/ehci.h>
  23 #include <asm/ehci-omap.h>
  24
  25 #include "../common/eeprom.h"
  26
  27 #define DIE_ID_REG_BASE         (OMAP54XX_L4_CORE_BASE + 0x2000)
  28 #define DIE_ID_REG_OFFSET       0x200
  29
  30 DECLARE_GLOBAL_DATA_PTR;
  31
  32 #if !defined(CONFIG_SPL_BUILD)
  33 inline void set_muxconf_regs_essential(void){};
  34 #endif
  35
  36 const struct omap_sysinfo sysinfo = {
  37         "Board: CM-T54\n"
  38 };
  39
  40 /*
  41  * Routine: board_init
  42  * Description: hardware init.
  43  */
  44 int board_init(void)
  45 {
  46         gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
  47
  48         return 0;
  49 }
  50
  51 /*
  52  * Routine: cm_t54_palmas_regulator_set
  53  * Description:  select voltage and turn on/off Palmas PMIC regulator.
  54  */
  55 static int cm_t54_palmas_regulator_set(u8 vreg, u8 vval, u8 creg, u8 cval)
  56 {
  57         int err;
  58
  59         /* Setup voltage */
  60         err = palmas_i2c_write_u8(TWL603X_CHIP_P1, vreg, vval);
  61         if (err) {
  62                 printf("cm_t54: could not set regulator 0x%02x voltage : %d\n",
  63                        vreg, err);
  64                 return err;
  65         }
  66
  67         /* Turn on/off regulator */
  68         err = palmas_i2c_write_u8(TWL603X_CHIP_P1, creg, cval);
  69         if (err) {
  70                 printf("cm_t54: could not turn on/off regulator 0x%02x : %d\n",
  71                        creg, err);
  72                 return err;
  73         }
  74
  75         return 0;
  76 }
  77
  78 /*
  79  * Routine: mmc_get_env_part
  80  * Description:  setup environment storage device partition.
  81  */
  82 #ifdef CONFIG_SYS_MMC_ENV_PART
  83 uint mmc_get_env_part(struct mmc *mmc)
  84 {
  85         u32 bootmode = gd->arch.omap_boot_params.omap_bootmode;
  86         uint bootpart = CONFIG_SYS_MMC_ENV_PART;
  87
  88         /*
  89          * If booted from eMMC boot partition then force eMMC
  90          * FIRST boot partition to be env storage
  91          */
  92         if (bootmode == BOOT_DEVICE_MMC2)
  93                 bootpart = 1;
  94
  95         return bootpart;
  96 }
  97 #endif
  98
  99 #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
 100 #define SB_T54_CD_GPIO 228
 101 #define SB_T54_WP_GPIO 229
 102
 103 int board_mmc_init(bd_t *bis)
 104 {
 105         int ret0, ret1;
 106
 107         ret0 = omap_mmc_init(0, 0, 0, SB_T54_CD_GPIO, SB_T54_WP_GPIO);
 108         if (ret0)
 109                 printf("cm_t54: failed to initialize mmc0\n");
 110
 111         ret1 = omap_mmc_init(1, 0, 0, -1, -1);
 112         if (ret1)
 113                 printf("cm_t54: failed to initialize mmc1\n");
 114
 115         if (ret0 && ret1)
 116                 return -1;
 117
 118         return 0;
 119 }
 120 #endif
 121
 122 #ifdef CONFIG_USB_HOST_ETHER
 123
 124 void ft_board_setup(void *blob, bd_t *bd)
 125 {
 126         uint8_t enetaddr[6];
 127
 128         /* MAC addr */
 129         if (eth_getenv_enetaddr("usbethaddr", enetaddr)) {
 130                 fdt_find_and_setprop(blob, "/smsc95xx@0", "mac-address",
 131                                      enetaddr, 6, 1);
 132         }
 133 }
 134
 135 static void generate_mac_addr(uint8_t *enetaddr)
 136 {
 137         int reg;
 138
 139         reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET;
 140
 141         /*
 142          * create a fake MAC address from the processor ID code.
 143          * first byte is 0x02 to signify locally administered.
 144          */
 145         enetaddr[0] = 0x02;
 146         enetaddr[1] = readl(reg + 0x10) & 0xff;
 147         enetaddr[2] = readl(reg + 0xC) & 0xff;
 148         enetaddr[3] = readl(reg + 0x8) & 0xff;
 149         enetaddr[4] = readl(reg) & 0xff;
 150         enetaddr[5] = (readl(reg) >> 8) & 0xff;
 151 }
 152
 153 /*
 154  * Routine: handle_mac_address
 155  * Description: prepare MAC address for on-board Ethernet.
 156  */
 157 static int handle_mac_address(void)
 158 {
 159         uint8_t enetaddr[6];
 160         int ret;
 161
 162         ret = eth_getenv_enetaddr("usbethaddr", enetaddr);
 163         if (ret)
 164                 return 0;
 165
 166         ret = cl_eeprom_read_mac_addr(enetaddr);
 167         if (ret || !is_valid_ether_addr(enetaddr))
 168                 generate_mac_addr(enetaddr);
 169
 170         if (!is_valid_ether_addr(enetaddr))
 171                 return -1;
 172
 173         return eth_setenv_enetaddr("usbethaddr", enetaddr);
 174 }
 175
 176 int board_eth_init(bd_t *bis)
 177 {
 178         return handle_mac_address();
 179 }
 180 #endif
 181
 182 #ifdef CONFIG_USB_EHCI
 183 static struct omap_usbhs_board_data usbhs_bdata = {
 184         .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
 185         .port_mode[1] = OMAP_EHCI_PORT_MODE_HSIC,
 186         .port_mode[2] = OMAP_EHCI_PORT_MODE_HSIC,
 187 };
 188
 189 static void setup_host_clocks(bool enable)
 190 {
 191         int usbhost_clk = OPTFCLKEN_HSIC60M_P3_CLK |
 192                           OPTFCLKEN_HSIC480M_P3_CLK |
 193                           OPTFCLKEN_HSIC60M_P2_CLK |
 194                           OPTFCLKEN_HSIC480M_P2_CLK |
 195                           OPTFCLKEN_UTMI_P3_CLK |
 196                           OPTFCLKEN_UTMI_P2_CLK;
 197
 198         int usbtll_clk = OPTFCLKEN_USB_CH1_CLK_ENABLE |
 199                          OPTFCLKEN_USB_CH2_CLK_ENABLE;
 200
 201         int usbhub_clk = CKOBUFFER_CLK_ENABLE_MASK;
 202
 203         if (enable) {
 204                 /* Enable port 2 and 3 clocks*/
 205                 setbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, usbhost_clk);
 206                 /* Enable port 2 and 3 usb host ports tll clocks*/
 207                 setbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, usbtll_clk);
 208                 /* Request FREF_XTAL_CLK clock for HSIC USB Hub */
 209                 setbits_le32((*ctrl)->control_ckobuffer, usbhub_clk);
 210         } else {
 211                 clrbits_le32((*ctrl)->control_ckobuffer, usbhub_clk);
 212                 clrbits_le32((*prcm)->cm_l3init_hsusbtll_clkctrl, usbtll_clk);
 213                 clrbits_le32((*prcm)->cm_l3init_hsusbhost_clkctrl, usbhost_clk);
 214         }
 215 }
 216
 217 int ehci_hcd_init(int index, enum usb_init_type init,
 218                 struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 219 {
 220         int ret;
 221
 222         /* VCC_3V3_ETH */
 223         cm_t54_palmas_regulator_set(SMPS9_VOLTAGE, SMPS_VOLT_3V3, SMPS9_CTRL,
 224                                     SMPS_MODE_SLP_AUTO | SMPS_MODE_ACT_AUTO);
 225
 226         setup_host_clocks(true);
 227
 228         ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
 229         if (ret < 0)
 230                 printf("cm_t54: Failed to initialize ehci : %d\n", ret);
 231
 232         return ret;
 233 }
 234
 235 int ehci_hcd_stop(void)
 236 {
 237         int ret = omap_ehci_hcd_stop();
 238
 239         setup_host_clocks(false);
 240
 241         cm_t54_palmas_regulator_set(SMPS9_VOLTAGE, SMPS_VOLT_OFF,
 242                                     SMPS9_CTRL, SMPS_MODE_SLP_AUTO);
 243
 244         return ret;
 245 }
 246
 247 void usb_hub_reset_devices(int port)
 248 {
 249         /* The LAN9730 needs to be reset after the port power has been set. */
 250         if (port == 3) {
 251                 gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 0);
 252                 udelay(10);
 253                 gpio_direction_output(CONFIG_OMAP_EHCI_PHY3_RESET_GPIO, 1);
 254         }
 255 }
 256 #endif
 257