2 * (C) Copyright 2007-2008
3 * Stelian Pop <stelian.pop@leadtechdesign.com>
4 * Lead Tech Design <www.leadtechdesign.com>
6 * See file CREDITS for list of people who contributed to this
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26 #include <asm/arch/at91sam9260.h>
27 #include <asm/arch/at91sam9260_matrix.h>
28 #include <asm/arch/at91sam9_smc.h>
29 #include <asm/arch/at91_common.h>
30 #include <asm/arch/at91_pmc.h>
31 #include <asm/arch/at91_rstc.h>
32 #include <asm/arch/gpio.h>
33 #include <asm/arch/io.h>
34 #include <asm/arch/hardware.h>
35 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
40 DECLARE_GLOBAL_DATA_PTR;
42 /* ------------------------------------------------------------------------- */
44 * Miscelaneous platform dependent initialisations
47 #ifdef CONFIG_CMD_NAND
48 static void at91sam9260ek_nand_hw_init(void)
53 csa = at91_sys_read(AT91_MATRIX_EBICSA);
54 at91_sys_write(AT91_MATRIX_EBICSA,
55 csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
57 /* Configure SMC CS3 for NAND/SmartMedia */
58 at91_sys_write(AT91_SMC_SETUP(3),
59 AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
60 AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
61 at91_sys_write(AT91_SMC_PULSE(3),
62 AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
63 AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
64 at91_sys_write(AT91_SMC_CYCLE(3),
65 AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
66 at91_sys_write(AT91_SMC_MODE(3),
67 AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
68 AT91_SMC_EXNWMODE_DISABLE |
69 #ifdef CONFIG_SYS_NAND_DBW_16
71 #else /* CONFIG_SYS_NAND_DBW_8 */
76 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
78 /* Configure RDY/BSY */
79 at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
81 /* Enable NandFlash */
82 at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
87 static void at91sam9260ek_macb_hw_init(void)
92 at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
96 * RXDV (PA17) => PHY normal mode (not Test mode)
97 * ERX0 (PA14) => PHY ADDR0
98 * ERX1 (PA15) => PHY ADDR1
99 * ERX2 (PA25) => PHY ADDR2
100 * ERX3 (PA26) => PHY ADDR3
101 * ECRS (PA28) => PHY ADDR4 => PHYADDR = 0x0
103 * PHY has internal pull-down
105 writel(pin_to_mask(AT91_PIN_PA14) |
106 pin_to_mask(AT91_PIN_PA15) |
107 pin_to_mask(AT91_PIN_PA17) |
108 pin_to_mask(AT91_PIN_PA25) |
109 pin_to_mask(AT91_PIN_PA26) |
110 pin_to_mask(AT91_PIN_PA28),
111 pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
113 rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
115 /* Need to reset PHY -> 500ms reset */
116 at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
117 (AT91_RSTC_ERSTL & (0x0D << 8)) |
120 at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
122 /* Wait for end hardware reset */
123 while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
125 /* Restore NRST value */
126 at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
130 /* Re-enable pull-up */
131 writel(pin_to_mask(AT91_PIN_PA14) |
132 pin_to_mask(AT91_PIN_PA15) |
133 pin_to_mask(AT91_PIN_PA17) |
134 pin_to_mask(AT91_PIN_PA25) |
135 pin_to_mask(AT91_PIN_PA26) |
136 pin_to_mask(AT91_PIN_PA28),
137 pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
148 #ifdef CONFIG_AT91SAM9G20EK
149 /* arch number of AT91SAM9260EK-Board */
150 gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK;
152 /* arch number of AT91SAM9260EK-Board */
153 gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK;
155 /* adress of boot parameters */
156 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
158 at91_serial_hw_init();
159 #ifdef CONFIG_CMD_NAND
160 at91sam9260ek_nand_hw_init();
162 #ifdef CONFIG_HAS_DATAFLASH
163 at91_spi0_hw_init((1 << 0) | (1 << 1));
166 at91sam9260ek_macb_hw_init();
174 gd->bd->bi_dram[0].start = PHYS_SDRAM;
175 gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
179 #ifdef CONFIG_RESET_PHY_R
184 * Initialize ethernet HW addr prior to starting Linux,
192 int board_eth_init(bd_t *bis)
196 rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);