board/amcc/sequoia/sequoia.c

   1 /*
   2  * (C) Copyright 2006
   3  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   4  *
   5  * (C) Copyright 2006
   6  * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
   7  * Alain Saurel,            AMCC/IBM, alain.saurel@fr.ibm.com
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 of
  12  * the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  22  * MA 02111-1307 USA
  23  */
  24
  25 #include <common.h>
  26 #include <asm/processor.h>
  27 #include <ppc440.h>
  28 #include "sequoia.h"
  29
  30 DECLARE_GLOBAL_DATA_PTR;
  31
  32 extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips    */
  33
  34 ulong flash_get_size (ulong base, int banknum);
  35
  36 int board_early_init_f(void)
  37 {
  38         unsigned long sdr0_cust0;
  39         unsigned long sdr0_pfc1, sdr0_pfc2;
  40         register uint reg;
  41
  42         mtdcr(ebccfga, xbcfg);
  43         mtdcr(ebccfgd, 0xb8400000);
  44
  45         /*--------------------------------------------------------------------
  46          * Setup the GPIO pins
  47          *-------------------------------------------------------------------*/
  48         /* test-only: take GPIO init from pcs440ep ???? in config file */
  49         out32(GPIO0_OR, 0x00000000);
  50         out32(GPIO0_TCR, 0x0000000f);
  51         out32(GPIO0_OSRL, 0x50015400);
  52         out32(GPIO0_OSRH, 0x550050aa);
  53         out32(GPIO0_TSRL, 0x50015400);
  54         out32(GPIO0_TSRH, 0x55005000);
  55         out32(GPIO0_ISR1L, 0x50000000);
  56         out32(GPIO0_ISR1H, 0x00000000);
  57         out32(GPIO0_ISR2L, 0x00000000);
  58         out32(GPIO0_ISR2H, 0x00000100);
  59         out32(GPIO0_ISR3L, 0x00000000);
  60         out32(GPIO0_ISR3H, 0x00000000);
  61
  62         out32(GPIO1_OR, 0x00000000);
  63         out32(GPIO1_TCR, 0xc2000000);
  64         out32(GPIO1_OSRL, 0x5c280000);
  65         out32(GPIO1_OSRH, 0x00000000);
  66         out32(GPIO1_TSRL, 0x0c000000);
  67         out32(GPIO1_TSRH, 0x00000000);
  68         out32(GPIO1_ISR1L, 0x00005550);
  69         out32(GPIO1_ISR1H, 0x00000000);
  70         out32(GPIO1_ISR2L, 0x00050000);
  71         out32(GPIO1_ISR2H, 0x00000000);
  72         out32(GPIO1_ISR3L, 0x01400000);
  73         out32(GPIO1_ISR3H, 0x00000000);
  74
  75         /*--------------------------------------------------------------------
  76          * Setup the interrupt controller polarities, triggers, etc.
  77          *-------------------------------------------------------------------*/
  78         mtdcr(uic0sr, 0xffffffff);      /* clear all */
  79         mtdcr(uic0er, 0x00000000);      /* disable all */
  80         mtdcr(uic0cr, 0x00000005);      /* ATI & UIC1 crit are critical */
  81         mtdcr(uic0pr, 0xfffff7ff);      /* per ref-board manual */
  82         mtdcr(uic0tr, 0x00000000);      /* per ref-board manual */
  83         mtdcr(uic0vr, 0x00000000);      /* int31 highest, base=0x000 */
  84         mtdcr(uic0sr, 0xffffffff);      /* clear all */
  85
  86         mtdcr(uic1sr, 0xffffffff);      /* clear all */
  87         mtdcr(uic1er, 0x00000000);      /* disable all */
  88         mtdcr(uic1cr, 0x00000000);      /* all non-critical */
  89         mtdcr(uic1pr, 0xffffffff);      /* per ref-board manual */
  90         mtdcr(uic1tr, 0x00000000);      /* per ref-board manual */
  91         mtdcr(uic1vr, 0x00000000);      /* int31 highest, base=0x000 */
  92         mtdcr(uic1sr, 0xffffffff);      /* clear all */
  93
  94         mtdcr(uic2sr, 0xffffffff);      /* clear all */
  95         mtdcr(uic2er, 0x00000000);      /* disable all */
  96         mtdcr(uic2cr, 0x00000000);      /* all non-critical */
  97         mtdcr(uic2pr, 0xffffffff);      /* per ref-board manual */
  98         mtdcr(uic2tr, 0x00000000);      /* per ref-board manual */
  99         mtdcr(uic2vr, 0x00000000);      /* int31 highest, base=0x000 */
 100         mtdcr(uic2sr, 0xffffffff);      /* clear all */
 101
 102         /* 50MHz tmrclk */
 103         *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
 104
 105         /* clear write protects */
 106         *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x00;
 107
 108         /* enable Ethernet */
 109         *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0x00;
 110
 111         /* enable USB device */
 112         *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x20;
 113
 114         /* select Ethernet pins */
 115         mfsdr(SDR0_PFC1, sdr0_pfc1);
 116         sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | SDR0_PFC1_SELECT_CONFIG_4;
 117         mfsdr(SDR0_PFC2, sdr0_pfc2);
 118         sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | SDR0_PFC2_SELECT_CONFIG_4;
 119         mtsdr(SDR0_PFC2, sdr0_pfc2);
 120         mtsdr(SDR0_PFC1, sdr0_pfc1);
 121
 122         /* PCI arbiter enabled */
 123         mfsdr(sdr_pci0, reg);
 124         mtsdr(sdr_pci0, 0x80000000 | reg);
 125
 126         /* setup NAND FLASH */
 127         mfsdr(SDR0_CUST0, sdr0_cust0);
 128         sdr0_cust0 = SDR0_CUST0_MUX_NDFC_SEL    |
 129                 SDR0_CUST0_NDFC_ENABLE          |
 130                 SDR0_CUST0_NDFC_BW_8_BIT        |
 131                 SDR0_CUST0_NDFC_ARE_MASK        |
 132                 (0x80000000 >> (28 + CFG_NAND_CS));
 133         mtsdr(SDR0_CUST0, sdr0_cust0);
 134
 135         return 0;
 136 }
 137
 138 /*---------------------------------------------------------------------------+
 139   | misc_init_r.
 140   +---------------------------------------------------------------------------*/
 141 int misc_init_r(void)
 142 {
 143         uint pbcr;
 144         int size_val = 0;
 145 #ifdef CONFIG_440EPX
 146         unsigned long usb2d0cr = 0;
 147         unsigned long usb2phy0cr, usb2h0cr = 0;
 148         unsigned long sdr0_pfc1;
 149         char *act = getenv("usbact");
 150 #endif
 151
 152         /*
 153          * FLASH stuff...
 154          */
 155
 156         /* Re-do sizing to get full correct info */
 157
 158         /* adjust flash start and offset */
 159         gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
 160         gd->bd->bi_flashoffset = 0;
 161
 162 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 163         mtdcr(ebccfga, pb3cr);
 164 #else
 165         mtdcr(ebccfga, pb0cr);
 166 #endif
 167         pbcr = mfdcr(ebccfgd);
 168         switch (gd->bd->bi_flashsize) {
 169         case 1 << 20:
 170                 size_val = 0;
 171                 break;
 172         case 2 << 20:
 173                 size_val = 1;
 174                 break;
 175         case 4 << 20:
 176                 size_val = 2;
 177                 break;
 178         case 8 << 20:
 179                 size_val = 3;
 180                 break;
 181         case 16 << 20:
 182                 size_val = 4;
 183                 break;
 184         case 32 << 20:
 185                 size_val = 5;
 186                 break;
 187         case 64 << 20:
 188                 size_val = 6;
 189                 break;
 190         case 128 << 20:
 191                 size_val = 7;
 192                 break;
 193         }
 194         pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
 195 #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
 196         mtdcr(ebccfga, pb3cr);
 197 #else
 198         mtdcr(ebccfga, pb0cr);
 199 #endif
 200         mtdcr(ebccfgd, pbcr);
 201
 202         /*
 203          * Re-check to get correct base address
 204          */
 205         flash_get_size(gd->bd->bi_flashstart, 0);
 206
 207 #ifdef CFG_ENV_IS_IN_FLASH
 208         /* Monitor protection ON by default */
 209         (void)flash_protect(FLAG_PROTECT_SET,
 210                             -CFG_MONITOR_LEN,
 211                             0xffffffff,
 212                             &flash_info[0]);
 213
 214         /* Env protection ON by default */
 215         (void)flash_protect(FLAG_PROTECT_SET,
 216                             CFG_ENV_ADDR_REDUND,
 217                             CFG_ENV_ADDR_REDUND + 2*CFG_ENV_SECT_SIZE - 1,
 218                             &flash_info[0]);
 219 #endif
 220
 221         /*
 222          * USB suff...
 223          */
 224 #ifdef CONFIG_440EPX
 225         if (act == NULL || strcmp(act, "hostdev") == 0) {
 226                 /* SDR Setting */
 227                 mfsdr(SDR0_PFC1, sdr0_pfc1);
 228                 mfsdr(SDR0_USB0, usb2d0cr);
 229                 mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 230                 mfsdr(SDR0_USB2H0CR, usb2h0cr);
 231
 232                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
 233                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;       /*0*/
 234                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
 235                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ;    /*1*/
 236                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
 237                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;         /*0*/
 238                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
 239                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;          /*1*/
 240                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
 241                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;          /*1*/
 242
 243                 /* An 8-bit/60MHz interface is the only possible alternative
 244                    when connecting the Device to the PHY */
 245                 usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
 246                 usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ;        /*1*/
 247
 248                 /* To enable the USB 2.0 Device function through the UTMI interface */
 249                 usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
 250                 usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION;          /*1*/
 251
 252                 sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
 253                 sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL;                /*0*/
 254
 255                 mtsdr(SDR0_PFC1, sdr0_pfc1);
 256                 mtsdr(SDR0_USB0, usb2d0cr);
 257                 mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 258                 mtsdr(SDR0_USB2H0CR, usb2h0cr);
 259
 260                 /*clear resets*/
 261                 udelay (1000);
 262                 mtsdr(SDR0_SRST1, 0x00000000);
 263                 udelay (1000);
 264                 mtsdr(SDR0_SRST0, 0x00000000);
 265
 266                 printf("USB:   Host(int phy) Device(ext phy)\n");
 267
 268         } else if (strcmp(act, "dev") == 0) {
 269                 /*-------------------PATCH-------------------------------*/
 270                 mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 271
 272                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
 273                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;       /*0*/
 274                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
 275                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS;         /*0*/
 276                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
 277                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST;          /*1*/
 278                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
 279                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST;          /*1*/
 280                 mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 281
 282                 udelay (1000);
 283                 mtsdr(SDR0_SRST1, 0x672c6000);
 284
 285                 udelay (1000);
 286                 mtsdr(SDR0_SRST0, 0x00000080);
 287
 288                 udelay (1000);
 289                 mtsdr(SDR0_SRST1, 0x60206000);
 290
 291                 *(unsigned int *)(0xe0000350) = 0x00000001;
 292
 293                 udelay (1000);
 294                 mtsdr(SDR0_SRST1, 0x60306000);
 295                 /*-------------------PATCH-------------------------------*/
 296
 297                 /* SDR Setting */
 298                 mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 299                 mfsdr(SDR0_USB2H0CR, usb2h0cr);
 300                 mfsdr(SDR0_USB0, usb2d0cr);
 301                 mfsdr(SDR0_PFC1, sdr0_pfc1);
 302
 303                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK;
 304                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL;       /*0*/
 305                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK;
 306                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ;     /*0*/
 307                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK;
 308                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN;          /*1*/
 309                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK;
 310                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV;           /*0*/
 311                 usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK;
 312                 usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV;           /*0*/
 313
 314                 usb2h0cr   = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK;
 315                 usb2h0cr   = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ;         /*0*/
 316
 317                 usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK;
 318                 usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION;              /*0*/
 319
 320                 sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK;
 321                 sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL;                /*1*/
 322
 323                 mtsdr(SDR0_USB2H0CR, usb2h0cr);
 324                 mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
 325                 mtsdr(SDR0_USB0, usb2d0cr);
 326                 mtsdr(SDR0_PFC1, sdr0_pfc1);
 327
 328                 /*clear resets*/
 329                 udelay (1000);
 330                 mtsdr(SDR0_SRST1, 0x00000000);
 331                 udelay (1000);
 332                 mtsdr(SDR0_SRST0, 0x00000000);
 333
 334                 printf("USB:   Device(int phy)\n");
 335         }
 336 #endif /* CONFIG_440EPX */
 337
 338         return 0;
 339 }
 340
 341 int checkboard(void)
 342 {
 343         char *s = getenv("serial#");
 344
 345 #ifdef CONFIG_440EPX
 346         printf("Board: Sequoia - AMCC PPC440EPx Evaluation Board");
 347 #else
 348         printf("Board: Rainier - AMCC PPC440GRx Evaluation Board");
 349 #endif
 350         if (s != NULL) {
 351                 puts(", serial# ");
 352                 puts(s);
 353         }
 354         putc('\n');
 355
 356         return (0);
 357 }
 358
 359 #if defined(CFG_DRAM_TEST)
 360 int testdram(void)
 361 {
 362         unsigned long *mem = (unsigned long *)0;
 363         const unsigned long kend = (1024 / sizeof(unsigned long));
 364         unsigned long k, n;
 365
 366         mtmsr(0);
 367
 368         for (k = 0; k < CFG_MBYTES_SDRAM;
 369              ++k, mem += (1024 / sizeof(unsigned long))) {
 370                 if ((k & 1023) == 0) {
 371                         printf("%3d MB\r", k / 1024);
 372                 }
 373
 374                 memset(mem, 0xaaaaaaaa, 1024);
 375                 for (n = 0; n < kend; ++n) {
 376                         if (mem[n] != 0xaaaaaaaa) {
 377                                 printf("SDRAM test fails at: %08x\n",
 378                                        (uint) & mem[n]);
 379                                 return 1;
 380                         }
 381                 }
 382
 383                 memset(mem, 0x55555555, 1024);
 384                 for (n = 0; n < kend; ++n) {
 385                         if (mem[n] != 0x55555555) {
 386                                 printf("SDRAM test fails at: %08x\n",
 387                                        (uint) & mem[n]);
 388                                 return 1;
 389                         }
 390                 }
 391         }
 392         printf("SDRAM test passes\n");
 393         return 0;
 394 }
 395 #endif
 396
 397 /*************************************************************************
 398  *  pci_pre_init
 399  *
 400  *  This routine is called just prior to registering the hose and gives
 401  *  the board the opportunity to check things. Returning a value of zero
 402  *  indicates that things are bad & PCI initialization should be aborted.
 403  *
 404  *      Different boards may wish to customize the pci controller structure
 405  *      (add regions, override default access routines, etc) or perform
 406  *      certain pre-initialization actions.
 407  *
 408  ************************************************************************/
 409 #if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
 410 int pci_pre_init(struct pci_controller *hose)
 411 {
 412         unsigned long addr;
 413 #if 0
 414         /*--------------------------------------------------------------------------+
 415          *      Cactus is always configured as the host & requires the
 416          *      PCI arbiter to be enabled ???
 417          *--------------------------------------------------------------------------*/
 418         unsigned long strap;
 419         mfsdr(sdr_sdstp1, strap);
 420         if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
 421                 printf("PCI: SDR0_STRP1[PAE] not set.\n");
 422                 printf("PCI: Configuration aborted.\n");
 423                 return 0;
 424         }
 425 #endif
 426
 427         /*-------------------------------------------------------------------------+
 428           | Set priority for all PLB3 devices to 0.
 429           | Set PLB3 arbiter to fair mode.
 430           +-------------------------------------------------------------------------*/
 431         mfsdr(sdr_amp1, addr);
 432         mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
 433         addr = mfdcr(plb3_acr);
 434         mtdcr(plb3_acr, addr | 0x80000000);
 435
 436         /*-------------------------------------------------------------------------+
 437           | Set priority for all PLB4 devices to 0.
 438           +-------------------------------------------------------------------------*/
 439         mfsdr(sdr_amp0, addr);
 440         mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
 441         addr = mfdcr(plb4_acr) | 0xa0000000;    /* Was 0x8---- */
 442         mtdcr(plb4_acr, addr);
 443
 444         /*-------------------------------------------------------------------------+
 445           | Set Nebula PLB4 arbiter to fair mode.
 446           +-------------------------------------------------------------------------*/
 447         /* Segment0 */
 448         addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
 449         addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
 450         addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
 451         addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
 452         mtdcr(plb0_acr, addr);
 453
 454         /* Segment1 */
 455         addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
 456         addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
 457         addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
 458         addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
 459         mtdcr(plb1_acr, addr);
 460
 461         return 1;
 462 }
 463 #endif                          /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
 464
 465 /*************************************************************************
 466  *  pci_target_init
 467  *
 468  *      The bootstrap configuration provides default settings for the pci
 469  *      inbound map (PIM). But the bootstrap config choices are limited and
 470  *      may not be sufficient for a given board.
 471  *
 472  ************************************************************************/
 473 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
 474 void pci_target_init(struct pci_controller *hose)
 475 {
 476         /*--------------------------------------------------------------------------+
 477          * Set up Direct MMIO registers
 478          *--------------------------------------------------------------------------*/
 479         /*--------------------------------------------------------------------------+
 480           | PowerPC440EPX PCI Master configuration.
 481           | Map one 1Gig range of PLB/processor addresses to PCI memory space.
 482           |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
 483           |   Use byte reversed out routines to handle endianess.
 484           | Make this region non-prefetchable.
 485           +--------------------------------------------------------------------------*/
 486         out32r(PCIX0_PMM0MA, 0x00000000);       /* PMM0 Mask/Attribute - disabled b4 setting */
 487         out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);  /* PMM0 Local Address */
 488         out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);       /* PMM0 PCI Low Address */
 489         out32r(PCIX0_PMM0PCIHA, 0x00000000);    /* PMM0 PCI High Address */
 490         out32r(PCIX0_PMM0MA, 0xE0000001);       /* 512M + No prefetching, and enable region */
 491
 492         out32r(PCIX0_PMM1MA, 0x00000000);       /* PMM0 Mask/Attribute - disabled b4 setting */
 493         out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
 494         out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);      /* PMM0 PCI Low Address */
 495         out32r(PCIX0_PMM1PCIHA, 0x00000000);    /* PMM0 PCI High Address */
 496         out32r(PCIX0_PMM1MA, 0xE0000001);       /* 512M + No prefetching, and enable region */
 497
 498         out32r(PCIX0_PTM1MS, 0x00000001);       /* Memory Size/Attribute */
 499         out32r(PCIX0_PTM1LA, 0);        /* Local Addr. Reg */
 500         out32r(PCIX0_PTM2MS, 0);        /* Memory Size/Attribute */
 501         out32r(PCIX0_PTM2LA, 0);        /* Local Addr. Reg */
 502
 503         /*--------------------------------------------------------------------------+
 504          * Set up Configuration registers
 505          *--------------------------------------------------------------------------*/
 506
 507         /* Program the board's subsystem id/vendor id */
 508         pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
 509                               CFG_PCI_SUBSYS_VENDORID);
 510         pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
 511
 512         /* Configure command register as bus master */
 513         pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
 514
 515         /* 240nS PCI clock */
 516         pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
 517
 518         /* No error reporting */
 519         pci_write_config_word(0, PCI_ERREN, 0);
 520
 521         pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
 522
 523 }
 524 #endif                          /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
 525
 526 /*************************************************************************
 527  *  pci_master_init
 528  *
 529  ************************************************************************/
 530 #if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
 531 void pci_master_init(struct pci_controller *hose)
 532 {
 533         unsigned short temp_short;
 534
 535         /*--------------------------------------------------------------------------+
 536           | Write the PowerPC440 EP PCI Configuration regs.
 537           |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
 538           |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
 539           +--------------------------------------------------------------------------*/
 540         pci_read_config_word(0, PCI_COMMAND, &temp_short);
 541         pci_write_config_word(0, PCI_COMMAND,
 542                               temp_short | PCI_COMMAND_MASTER |
 543                               PCI_COMMAND_MEMORY);
 544 }
 545 #endif                          /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
 546
 547 /*************************************************************************
 548  *  is_pci_host
 549  *
 550  *      This routine is called to determine if a pci scan should be
 551  *      performed. With various hardware environments (especially cPCI and
 552  *      PPMC) it's insufficient to depend on the state of the arbiter enable
 553  *      bit in the strap register, or generic host/adapter assumptions.
 554  *
 555  *      Rather than hard-code a bad assumption in the general 440 code, the
 556  *      440 pci code requires the board to decide at runtime.
 557  *
 558  *      Return 0 for adapter mode, non-zero for host (monarch) mode.
 559  *
 560  *
 561  ************************************************************************/
 562 #if defined(CONFIG_PCI)
 563 int is_pci_host(struct pci_controller *hose)
 564 {
 565         /* Cactus is always configured as host. */
 566         return (1);
 567 }
 568 #endif                          /* defined(CONFIG_PCI) */