2 * Copyright (C) 2007 Denys Vlasenko <vda.linux@googlemail.com>
4 * This file uses bzip2 library code which is written
5 * by Julian Seward <jseward@bzip.org>.
6 * See README and LICENSE files in bz/ directory for more information
7 * about bzip2 library code.
10 //config: bool "bzip2 (18 kb)"
13 //config: bzip2 is a compression utility using the Burrows-Wheeler block
14 //config: sorting text compression algorithm, and Huffman coding. Compression
15 //config: is generally considerably better than that achieved by more
16 //config: conventional LZ77/LZ78-based compressors, and approaches the
17 //config: performance of the PPM family of statistical compressors.
19 //config: Unless you have a specific application which requires bzip2, you
20 //config: should probably say N here.
22 //config:config BZIP2_SMALL
23 //config: int "Trade bytes for speed (0:fast, 9:small)"
24 //config: default 8 # all "fast or small" options default to small
26 //config: depends on BZIP2
28 //config: Trade code size versus speed.
29 //config: Approximate values with gcc-6.3.0 "bzip -9" compressing
30 //config: linux-4.15.tar were:
31 //config: value time (sec) code size (386)
32 //config: 9 (smallest) 70.11 7687
33 //config: 8 67.93 8091
34 //config: 7 67.88 8405
35 //config: 6 67.78 8624
36 //config: 5 67.05 9427
37 //config: 4-0 (fastest) 64.14 12083
39 //config:config FEATURE_BZIP2_DECOMPRESS
40 //config: bool "Enable decompression"
42 //config: depends on BZIP2 || BUNZIP2 || BZCAT
44 //config: Enable -d (--decompress) and -t (--test) options for bzip2.
45 //config: This will be automatically selected if bunzip2 or bzcat is
48 //applet:IF_BZIP2(APPLET(bzip2, BB_DIR_USR_BIN, BB_SUID_DROP))
50 //kbuild:lib-$(CONFIG_BZIP2) += bzip2.o
52 //usage:#define bzip2_trivial_usage
53 //usage: "[OPTIONS] [FILE]..."
54 //usage:#define bzip2_full_usage "\n\n"
55 //usage: "Compress FILEs (or stdin) with bzip2 algorithm\n"
56 //usage: "\n -1..9 Compression level"
57 //usage: IF_FEATURE_BZIP2_DECOMPRESS(
58 //usage: "\n -d Decompress"
59 //usage: "\n -t Test file integrity"
61 //usage: "\n -c Write to stdout"
62 //usage: "\n -f Force"
63 //usage: "\n -k Keep input files"
66 #include "bb_archive.h"
68 #if CONFIG_BZIP2_SMALL >= 4
69 #define BZIP2_SPEED (9 - CONFIG_BZIP2_SMALL)
75 * Compiled with gcc 4.2.1, run on Athlon 64 1800 MHz (512K L2 cache).
76 * Stock bzip2 is 26.4% slower than bbox bzip2 at SPEED 1
77 * (time to compress gcc-4.2.1.tar is 126.4% compared to bbox).
78 * At SPEED 5 difference is 32.7%.
80 * Test run of all BZIP2_SPEED values on a 11Mb text file:
82 * 0: 10828 4.145 4.146 4.148
83 * 1: 11097 3.845 3.860 3.861
84 * 2: 11392 3.763 3.767 3.768
85 * 3: 11892 3.722 3.724 3.727
86 * 4: 12740 3.637 3.640 3.644
87 * 5: 17273 3.497 3.509 3.509
92 /* Takes ~300 bytes, detects corruption caused by bad RAM etc */
93 #define BZ_LIGHT_DEBUG 0
95 #include "libarchive/bz/bzlib.h"
97 #include "libarchive/bz/bzlib_private.h"
99 #include "libarchive/bz/blocksort.c"
100 #include "libarchive/bz/bzlib.c"
101 #include "libarchive/bz/compress.c"
102 #include "libarchive/bz/huffman.c"
104 /* No point in being shy and having very small buffer here.
105 * bzip2 internal buffers are much bigger anyway, hundreds of kbytes.
106 * If iobuf is several pages long, malloc() may use mmap,
107 * making iobuf page aligned and thus (maybe) have one memcpy less
108 * if kernel is clever enough.
111 IOBUF_SIZE = 8 * 1024
114 /* NB: compressStream() has to return -1 on errors, not die.
115 * bbunpack() will correctly clean up in this case
116 * (delete incomplete .bz2 file)
121 * total written bytes so far otherwise
124 IF_DESKTOP(long long) int bz_write(bz_stream *strm, void* rbuf, ssize_t rlen, void *wbuf)
128 strm->avail_in = rlen;
129 strm->next_in = rbuf;
131 strm->avail_out = IOBUF_SIZE;
132 strm->next_out = wbuf;
134 ret = BZ2_bzCompress(strm, rlen ? BZ_RUN : BZ_FINISH);
135 if (ret != BZ_RUN_OK /* BZ_RUNning */
136 && ret != BZ_FINISH_OK /* BZ_FINISHing, but not done yet */
137 && ret != BZ_STREAM_END /* BZ_FINISHed */
139 bb_error_msg_and_die("internal error %d", ret);
142 n = IOBUF_SIZE - strm->avail_out;
144 n2 = full_write(STDOUT_FILENO, wbuf, n);
147 errno = 0; /* prevent bogus error message */
148 bb_perror_msg(n2 >= 0 ? "short write" : bb_msg_write_error);
153 if (ret == BZ_STREAM_END)
155 if (rlen && strm->avail_in == 0)
158 return 0 IF_DESKTOP( + strm->total_out );
162 IF_DESKTOP(long long) int FAST_FUNC compressStream(transformer_state_t *xstate UNUSED_PARAM)
164 IF_DESKTOP(long long) int total;
167 bz_stream bzs; /* it's small */
171 #define wbuf (iobuf + IOBUF_SIZE)
173 iobuf = xmalloc(2 * IOBUF_SIZE);
175 opt = option_mask32 >> (BBUNPK_OPTSTRLEN IF_FEATURE_BZIP2_DECOMPRESS(+ 2) + 2);
176 /* skipped BBUNPK_OPTSTR, "dt" and "zs" bits */
177 opt |= 0x100; /* if nothing else, assume -9 */
185 BZ2_bzCompressInit(strm, level);
188 count = full_read(STDIN_FILENO, rbuf, IOBUF_SIZE);
190 bb_perror_msg(bb_msg_read_error);
194 /* if count == 0, bz_write finalizes compression */
195 total = bz_write(strm, rbuf, count, wbuf);
196 if (count == 0 || total < 0)
200 /* Can't be conditional on ENABLE_FEATURE_CLEAN_UP -
201 * we are called repeatedly
203 BZ2_bzCompressEnd(strm);
209 int bzip2_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE;
210 int bzip2_main(int argc UNUSED_PARAM, char **argv)
214 /* standard bzip2 flags
215 * -d --decompress force decompression
216 * -z --compress force compression
217 * -k --keep keep (don't delete) input files
218 * -f --force overwrite existing output files
219 * -t --test test compressed file integrity
220 * -c --stdout output to standard out
221 * -q --quiet suppress noncritical error messages
222 * -v --verbose be verbose (a 2nd -v gives more)
223 * -s --small use less memory (at most 2500k)
224 * -1 .. -9 set block size to 100k .. 900k
225 * --fast alias for -1
226 * --best alias for -9
229 opt = getopt32(argv, "^"
230 /* Must match BBUNPK_foo constants! */
231 BBUNPK_OPTSTR IF_FEATURE_BZIP2_DECOMPRESS("dt") "zs123456789"
232 "\0" "s2" /* -s means -2 (compatibility) */
234 #if ENABLE_FEATURE_BZIP2_DECOMPRESS /* bunzip2_main may not be visible... */
235 if (opt & (BBUNPK_OPT_DECOMPRESS|BBUNPK_OPT_TEST)) /* -d and/or -t */
236 return bunzip2_main(argc, argv);
238 /* clear "decompress" and "test" bits (or bbunpack() can get confused) */
239 /* in !BZIP2_DECOMPRESS config, these bits are -zs and are unused */
240 option_mask32 = opt & ~(BBUNPK_OPT_DECOMPRESS|BBUNPK_OPT_TEST);
244 return bbunpack(argv, compressStream, append_ext, "bz2");