2 * Copyright (c) 2011 The Chromium OS Authors.
4 * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
6 * See file CREDITS for list of people who contributed to this
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26 * Linux x86 zImage and bzImage loading
28 * based on the procdure described in
29 * linux/Documentation/i386/boot.txt
34 #include <asm/ptrace.h>
35 #include <asm/zimage.h>
36 #include <asm/realmode.h>
37 #include <asm/byteorder.h>
38 #include <asm/bootparam.h>
39 #ifdef CONFIG_SYS_COREBOOT
40 #include <asm/arch/timestamp.h>
42 #include <linux/compiler.h>
47 * relative to setup_base (which is 0x90000 currently)
49 * 0x0000-0x7FFF Real mode kernel
50 * 0x8000-0x8FFF Stack and heap
51 * 0x9000-0x90FF Kernel command line
53 #define DEFAULT_SETUP_BASE 0x90000
54 #define COMMAND_LINE_OFFSET 0x9000
55 #define HEAP_END_OFFSET 0x8e00
57 #define COMMAND_LINE_SIZE 2048
59 unsigned generic_install_e820_map(unsigned max_entries,
60 struct e820entry *entries)
65 unsigned install_e820_map(unsigned max_entries,
66 struct e820entry *entries)
67 __attribute__((weak, alias("generic_install_e820_map")));
69 static void build_command_line(char *command_line, int auto_boot)
71 char *env_command_line;
73 command_line[0] = '\0';
75 env_command_line = getenv("bootargs");
77 /* set console= argument if we use a serial console */
78 if (!strstr(env_command_line, "console=")) {
79 if (!strcmp(getenv("stdout"), "serial")) {
81 /* We seem to use serial console */
82 sprintf(command_line, "console=ttyS0,%s ",
88 strcat(command_line, "auto ");
91 strcat(command_line, env_command_line);
93 printf("Kernel command line: \"%s\"\n", command_line);
96 static int kernel_magic_ok(struct setup_header *hdr)
98 if (KERNEL_MAGIC != hdr->boot_flag) {
99 printf("Error: Invalid Boot Flag "
100 "(found 0x%04x, expected 0x%04x)\n",
101 hdr->boot_flag, KERNEL_MAGIC);
104 printf("Valid Boot Flag\n");
109 static int get_boot_protocol(struct setup_header *hdr)
111 if (hdr->header == KERNEL_V2_MAGIC) {
112 printf("Magic signature found\n");
115 /* Very old kernel */
116 printf("Magic signature not found\n");
121 struct boot_params *load_zimage(char *image, unsigned long kernel_size,
124 struct boot_params *setup_base;
129 struct boot_params *params = (struct boot_params *)image;
130 struct setup_header *hdr = ¶ms->hdr;
132 /* base address for real-mode segment */
133 setup_base = (struct boot_params *)DEFAULT_SETUP_BASE;
135 if (!kernel_magic_ok(hdr))
138 /* determine size of setup */
139 if (0 == hdr->setup_sects) {
140 printf("Setup Sectors = 0 (defaulting to 4)\n");
141 setup_size = 5 * 512;
143 setup_size = (hdr->setup_sects + 1) * 512;
146 printf("Setup Size = 0x%8.8lx\n", (ulong)setup_size);
148 if (setup_size > SETUP_MAX_SIZE)
149 printf("Error: Setup is too large (%d bytes)\n", setup_size);
151 /* determine boot protocol version */
152 bootproto = get_boot_protocol(hdr);
154 printf("Using boot protocol version %x.%02x\n",
155 (bootproto & 0xff00) >> 8, bootproto & 0xff);
157 if (bootproto >= 0x0200) {
158 if (hdr->setup_sects >= 15) {
159 printf("Linux kernel version %s\n",
161 hdr->kernel_version + 0x200);
163 printf("Setup Sectors < 15 - "
164 "Cannot print kernel version.\n");
168 /* Determine image type */
169 big_image = (bootproto >= 0x0200) &&
170 (hdr->loadflags & BIG_KERNEL_FLAG);
172 /* Determine load address */
174 *load_address = (void *)BZIMAGE_LOAD_ADDR;
176 *load_address = (void *)ZIMAGE_LOAD_ADDR;
178 #if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE)
179 printf("Building boot_params at 0x%8.8lx\n", (ulong)setup_base);
180 memset(setup_base, 0, sizeof(*setup_base));
181 setup_base->hdr = params->hdr;
184 printf("Moving Real-Mode Code to 0x%8.8lx (%d bytes)\n",
185 (ulong)setup_base, setup_size);
186 memmove(setup_base, image, setup_size);
189 if (bootproto >= 0x0204)
190 kernel_size = hdr->syssize * 16;
192 kernel_size -= setup_size;
194 if (bootproto == 0x0100) {
196 * A very old kernel MUST have its real-mode code
199 if ((u32)setup_base != 0x90000) {
200 /* Copy the real-mode kernel */
201 memmove((void *)0x90000, setup_base, setup_size);
203 /* Copy the command line */
204 memmove((void *)0x99000,
205 (u8 *)setup_base + COMMAND_LINE_OFFSET,
209 setup_base = (struct boot_params *)0x90000;
212 /* It is recommended to clear memory up to the 32K mark */
213 memset((u8 *)0x90000 + setup_size, 0,
214 SETUP_MAX_SIZE - setup_size);
218 if (kernel_size > BZIMAGE_MAX_SIZE) {
219 printf("Error: bzImage kernel too big! "
220 "(size: %ld, max: %d)\n",
221 kernel_size, BZIMAGE_MAX_SIZE);
224 } else if ((kernel_size) > ZIMAGE_MAX_SIZE) {
225 printf("Error: zImage kernel too big! (size: %ld, max: %d)\n",
226 kernel_size, ZIMAGE_MAX_SIZE);
230 printf("Loading %s at address %p (%ld bytes)\n",
231 big_image ? "bzImage" : "zImage", *load_address, kernel_size);
233 memmove(*load_address, image + setup_size, kernel_size);
238 int setup_zimage(struct boot_params *setup_base, char *cmd_line, int auto_boot,
239 unsigned long initrd_addr, unsigned long initrd_size)
241 struct setup_header *hdr = &setup_base->hdr;
242 int bootproto = get_boot_protocol(hdr);
244 #if (defined CONFIG_ZBOOT_32 || defined CONFIG_X86_NO_REAL_MODE)
245 setup_base->e820_entries = install_e820_map(
246 ARRAY_SIZE(setup_base->e820_map), setup_base->e820_map);
249 if (bootproto == 0x0100) {
250 setup_base->screen_info.cl_magic = COMMAND_LINE_MAGIC;
251 setup_base->screen_info.cl_offset = COMMAND_LINE_OFFSET;
253 if (bootproto >= 0x0200) {
254 hdr->type_of_loader = 8;
257 printf("Initial RAM disk at linear address "
258 "0x%08lx, size %ld bytes\n",
259 initrd_addr, initrd_size);
261 hdr->ramdisk_image = initrd_addr;
262 hdr->ramdisk_size = initrd_size;
266 if (bootproto >= 0x0201) {
267 hdr->heap_end_ptr = HEAP_END_OFFSET;
268 hdr->loadflags |= HEAP_FLAG;
271 if (bootproto >= 0x0202) {
272 hdr->cmd_line_ptr = (uintptr_t)cmd_line;
273 } else if (bootproto >= 0x0200) {
274 setup_base->screen_info.cl_magic = COMMAND_LINE_MAGIC;
275 setup_base->screen_info.cl_offset =
276 (uintptr_t)cmd_line - (uintptr_t)setup_base;
278 hdr->setup_move_size = 0x9100;
281 /* build command line at COMMAND_LINE_OFFSET */
282 build_command_line(cmd_line, auto_boot);
287 * Implement a weak default function for boards that optionally
288 * need to clean up the system before jumping to the kernel.
290 __weak void board_final_cleanup(void)
294 void boot_zimage(void *setup_base, void *load_address)
296 board_final_cleanup();
298 printf("\nStarting kernel ...\n\n");
300 #ifdef CONFIG_SYS_COREBOOT
301 timestamp_add_now(TS_U_BOOT_START_KERNEL);
303 #if defined CONFIG_ZBOOT_32
305 * Set %ebx, %ebp, and %edi to 0, %esi to point to the boot_params
306 * structure, and then jump to the kernel. We assume that %cs is
307 * 0x10, 4GB flat, and read/execute, and the data segments are 0x18,
308 * 4GB flat, and read/write. U-boot is setting them up that way for
309 * itself in arch/i386/cpu/cpu.c.
311 __asm__ __volatile__ (
314 "jmp *%[kernel_entry]\n"
315 :: [kernel_entry]"a"(load_address),
316 [boot_params] "S"(setup_base),
323 memset(®s, 0, sizeof(struct pt_regs));
324 regs.xds = (u32)setup_base >> 4;
329 enter_realmode(((u32)setup_base + SETUP_START_OFFSET) >> 4, 0,
334 void setup_pcat_compatibility(void)
335 __attribute__((weak, alias("__setup_pcat_compatibility")));
337 void __setup_pcat_compatibility(void)
341 int do_zboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
343 struct boot_params *base_ptr;
344 void *bzImage_addr = NULL;
347 ulong bzImage_size = 0;
348 ulong initrd_addr = 0;
349 ulong initrd_size = 0;
351 disable_interrupts();
353 /* Setup board for maximum PC/AT Compatibility */
354 setup_pcat_compatibility();
357 /* argv[1] holds the address of the bzImage */
360 s = getenv("fileaddr");
364 bzImage_addr = (void *)simple_strtoul(s, NULL, 16);
367 /* argv[2] holds the size of the bzImage */
368 bzImage_size = simple_strtoul(argv[2], NULL, 16);
372 initrd_addr = simple_strtoul(argv[3], NULL, 16);
374 initrd_size = simple_strtoul(argv[4], NULL, 16);
377 base_ptr = load_zimage(bzImage_addr, bzImage_size, &load_address);
380 printf("## Kernel loading failed ...\n");
383 if (setup_zimage(base_ptr, (char *)base_ptr + COMMAND_LINE_OFFSET,
384 0, initrd_addr, initrd_size)) {
385 printf("Setting up boot parameters failed ...\n");
389 printf("## Transferring control to Linux "
390 "(at address %08x) ...\n",
393 /* we assume that the kernel is in place */
394 boot_zimage(base_ptr, load_address);
395 /* does not return */
401 zboot, 5, 0, do_zboot,
403 "[addr] [size] [initrd addr] [initrd size]\n"
404 " addr - The optional starting address of the bzimage.\n"
405 " If not set it defaults to the environment\n"
406 " variable \"fileaddr\".\n"
407 " size - The optional size of the bzimage. Defaults to\n"
409 " initrd addr - The address of the initrd image to use, if any.\n"
410 " initrd size - The size of the initrd image to use, if any.\n"