arch/powerpc/boot/dts/mpc8377_wlan.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * MPC8377E WLAN Device Tree Source
   4  *
   5  * Copyright 2007-2009 Freescale Semiconductor Inc.
   6  * Copyright 2009 MontaVista Software, Inc.
   7  */
   8
   9 /dts-v1/;
  10
  11 / {
  12         compatible = "fsl,mpc8377wlan";
  13         #address-cells = <1>;
  14         #size-cells = <1>;
  15
  16         aliases {
  17                 ethernet0 = &enet0;
  18                 ethernet1 = &enet1;
  19                 serial0 = &serial0;
  20                 serial1 = &serial1;
  21                 pci0 = &pci0;
  22                 pci1 = &pci1;
  23                 pci2 = &pci2;
  24         };
  25
  26         cpus {
  27                 #address-cells = <1>;
  28                 #size-cells = <0>;
  29
  30                 PowerPC,8377@0 {
  31                         device_type = "cpu";
  32                         reg = <0x0>;
  33                         d-cache-line-size = <32>;
  34                         i-cache-line-size = <32>;
  35                         d-cache-size = <32768>;
  36                         i-cache-size = <32768>;
  37                         timebase-frequency = <0>;
  38                         bus-frequency = <0>;
  39                         clock-frequency = <0>;
  40                 };
  41         };
  42
  43         memory {
  44                 device_type = "memory";
  45                 reg = <0x00000000 0x20000000>;  // 512MB at 0
  46         };
  47
  48         localbus@e0005000 {
  49                 #address-cells = <2>;
  50                 #size-cells = <1>;
  51                 compatible = "fsl,mpc8377-elbc", "fsl,elbc", "simple-bus";
  52                 reg = <0xe0005000 0x1000>;
  53                 interrupts = <77 0x8>;
  54                 interrupt-parent = <&ipic>;
  55                 ranges = <0x0 0x0 0xfc000000 0x04000000>;
  56
  57                 flash@0,0 {
  58                         #address-cells = <1>;
  59                         #size-cells = <1>;
  60                         compatible = "cfi-flash";
  61                         reg = <0x0 0x0 0x4000000>;
  62                         bank-width = <2>;
  63                         device-width = <1>;
  64
  65                         partition@0 {
  66                                 reg = <0 0x80000>;
  67                                 label = "u-boot";
  68                                 read-only;
  69                         };
  70
  71                         partition@a0000 {
  72                                 reg = <0xa0000 0x300000>;
  73                                 label = "kernel";
  74                         };
  75
  76                         partition@3a0000 {
  77                                 reg = <0x3a0000 0x3c60000>;
  78                                 label = "rootfs";
  79                         };
  80                 };
  81         };
  82
  83         immr@e0000000 {
  84                 #address-cells = <1>;
  85                 #size-cells = <1>;
  86                 device_type = "soc";
  87                 compatible = "simple-bus";
  88                 ranges = <0x0 0xe0000000 0x00100000>;
  89                 reg = <0xe0000000 0x00000200>;
  90                 bus-frequency = <0>;
  91
  92                 wdt@200 {
  93                         device_type = "watchdog";
  94                         compatible = "mpc83xx_wdt";
  95                         reg = <0x200 0x100>;
  96                 };
  97
  98                 gpio1: gpio-controller@c00 {
  99                         #gpio-cells = <2>;
 100                         compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
 101                         reg = <0xc00 0x100>;
 102                         interrupts = <74 0x8>;
 103                         interrupt-parent = <&ipic>;
 104                         gpio-controller;
 105                 };
 106
 107                 gpio2: gpio-controller@d00 {
 108                         #gpio-cells = <2>;
 109                         compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio";
 110                         reg = <0xd00 0x100>;
 111                         interrupts = <75 0x8>;
 112                         interrupt-parent = <&ipic>;
 113                         gpio-controller;
 114                 };
 115
 116                 sleep-nexus {
 117                         #address-cells = <1>;
 118                         #size-cells = <1>;
 119                         compatible = "simple-bus";
 120                         sleep = <&pmc 0x0c000000>;
 121                         ranges;
 122
 123                         i2c@3000 {
 124                                 #address-cells = <1>;
 125                                 #size-cells = <0>;
 126                                 cell-index = <0>;
 127                                 compatible = "fsl-i2c";
 128                                 reg = <0x3000 0x100>;
 129                                 interrupts = <14 0x8>;
 130                                 interrupt-parent = <&ipic>;
 131                                 dfsrr;
 132
 133                                 at24@50 {
 134                                         compatible = "atmel,24c256";
 135                                         reg = <0x50>;
 136                                 };
 137
 138                                 rtc@68 {
 139                                         compatible = "dallas,ds1339";
 140                                         reg = <0x68>;
 141                                 };
 142                         };
 143
 144                         sdhci@2e000 {
 145                                 compatible = "fsl,mpc8377-esdhc", "fsl,esdhc";
 146                                 reg = <0x2e000 0x1000>;
 147                                 interrupts = <42 0x8>;
 148                                 interrupt-parent = <&ipic>;
 149                                 sdhci,wp-inverted;
 150                                 clock-frequency = <133333333>;
 151                         };
 152                 };
 153
 154                 i2c@3100 {
 155                         #address-cells = <1>;
 156                         #size-cells = <0>;
 157                         cell-index = <1>;
 158                         compatible = "fsl-i2c";
 159                         reg = <0x3100 0x100>;
 160                         interrupts = <15 0x8>;
 161                         interrupt-parent = <&ipic>;
 162                         dfsrr;
 163                 };
 164
 165                 spi@7000 {
 166                         cell-index = <0>;
 167                         compatible = "fsl,spi";
 168                         reg = <0x7000 0x1000>;
 169                         interrupts = <16 0x8>;
 170                         interrupt-parent = <&ipic>;
 171                         mode = "cpu";
 172                 };
 173
 174                 dma@82a8 {
 175                         #address-cells = <1>;
 176                         #size-cells = <1>;
 177                         compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
 178                         reg = <0x82a8 4>;
 179                         ranges = <0 0x8100 0x1a8>;
 180                         interrupt-parent = <&ipic>;
 181                         interrupts = <71 8>;
 182                         cell-index = <0>;
 183                         dma-channel@0 {
 184                                 compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 185                                 reg = <0 0x80>;
 186                                 cell-index = <0>;
 187                                 interrupt-parent = <&ipic>;
 188                                 interrupts = <71 8>;
 189                         };
 190                         dma-channel@80 {
 191                                 compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 192                                 reg = <0x80 0x80>;
 193                                 cell-index = <1>;
 194                                 interrupt-parent = <&ipic>;
 195                                 interrupts = <71 8>;
 196                         };
 197                         dma-channel@100 {
 198                                 compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 199                                 reg = <0x100 0x80>;
 200                                 cell-index = <2>;
 201                                 interrupt-parent = <&ipic>;
 202                                 interrupts = <71 8>;
 203                         };
 204                         dma-channel@180 {
 205                                 compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
 206                                 reg = <0x180 0x28>;
 207                                 cell-index = <3>;
 208                                 interrupt-parent = <&ipic>;
 209                                 interrupts = <71 8>;
 210                         };
 211                 };
 212
 213                 usb@23000 {
 214                         compatible = "fsl-usb2-dr";
 215                         reg = <0x23000 0x1000>;
 216                         #address-cells = <1>;
 217                         #size-cells = <0>;
 218                         interrupt-parent = <&ipic>;
 219                         interrupts = <38 0x8>;
 220                         phy_type = "ulpi";
 221                         sleep = <&pmc 0x00c00000>;
 222                 };
 223
 224                 enet0: ethernet@24000 {
 225                         #address-cells = <1>;
 226                         #size-cells = <1>;
 227                         cell-index = <0>;
 228                         device_type = "network";
 229                         model = "eTSEC";
 230                         compatible = "gianfar";
 231                         reg = <0x24000 0x1000>;
 232                         ranges = <0x0 0x24000 0x1000>;
 233                         local-mac-address = [ 00 00 00 00 00 00 ];
 234                         interrupts = <32 0x8 33 0x8 34 0x8>;
 235                         phy-connection-type = "mii";
 236                         interrupt-parent = <&ipic>;
 237                         tbi-handle = <&tbi0>;
 238                         phy-handle = <&phy2>;
 239                         sleep = <&pmc 0xc0000000>;
 240                         fsl,magic-packet;
 241
 242                         mdio@520 {
 243                                 #address-cells = <1>;
 244                                 #size-cells = <0>;
 245                                 compatible = "fsl,gianfar-mdio";
 246                                 reg = <0x520 0x20>;
 247
 248                                 phy2: ethernet-phy@2 {
 249                                         interrupt-parent = <&ipic>;
 250                                         interrupts = <17 0x8>;
 251                                         reg = <0x2>;
 252                                 };
 253
 254                                 phy3: ethernet-phy@3 {
 255                                         interrupt-parent = <&ipic>;
 256                                         interrupts = <18 0x8>;
 257                                         reg = <0x3>;
 258                                 };
 259
 260                                 tbi0: tbi-phy@11 {
 261                                         reg = <0x11>;
 262                                         device_type = "tbi-phy";
 263                                 };
 264                         };
 265                 };
 266
 267                 enet1: ethernet@25000 {
 268                         #address-cells = <1>;
 269                         #size-cells = <1>;
 270                         cell-index = <1>;
 271                         device_type = "network";
 272                         model = "eTSEC";
 273                         compatible = "gianfar";
 274                         reg = <0x25000 0x1000>;
 275                         ranges = <0x0 0x25000 0x1000>;
 276                         local-mac-address = [ 00 00 00 00 00 00 ];
 277                         interrupts = <35 0x8 36 0x8 37 0x8>;
 278                         phy-connection-type = "mii";
 279                         interrupt-parent = <&ipic>;
 280                         phy-handle = <&phy3>;
 281                         tbi-handle = <&tbi1>;
 282                         sleep = <&pmc 0x30000000>;
 283                         fsl,magic-packet;
 284
 285                         mdio@520 {
 286                                 #address-cells = <1>;
 287                                 #size-cells = <0>;
 288                                 compatible = "fsl,gianfar-tbi";
 289                                 reg = <0x520 0x20>;
 290
 291                                 tbi1: tbi-phy@11 {
 292                                         reg = <0x11>;
 293                                         device_type = "tbi-phy";
 294                                 };
 295                         };
 296                 };
 297
 298                 serial0: serial@4500 {
 299                         cell-index = <0>;
 300                         device_type = "serial";
 301                         compatible = "fsl,ns16550", "ns16550";
 302                         reg = <0x4500 0x100>;
 303                         clock-frequency = <0>;
 304                         interrupts = <9 0x8>;
 305                         interrupt-parent = <&ipic>;
 306                 };
 307
 308                 serial1: serial@4600 {
 309                         cell-index = <1>;
 310                         device_type = "serial";
 311                         compatible = "fsl,ns16550", "ns16550";
 312                         reg = <0x4600 0x100>;
 313                         clock-frequency = <0>;
 314                         interrupts = <10 0x8>;
 315                         interrupt-parent = <&ipic>;
 316                 };
 317
 318                 crypto@30000 {
 319                         compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
 320                                      "fsl,sec2.1", "fsl,sec2.0";
 321                         reg = <0x30000 0x10000>;
 322                         interrupts = <11 0x8>;
 323                         interrupt-parent = <&ipic>;
 324                         fsl,num-channels = <4>;
 325                         fsl,channel-fifo-len = <24>;
 326                         fsl,exec-units-mask = <0x9fe>;
 327                         fsl,descriptor-types-mask = <0x3ab0ebf>;
 328                         sleep = <&pmc 0x03000000>;
 329                 };
 330
 331                 sata@18000 {
 332                         compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
 333                         reg = <0x18000 0x1000>;
 334                         interrupts = <44 0x8>;
 335                         interrupt-parent = <&ipic>;
 336                         sleep = <&pmc 0x000000c0>;
 337                 };
 338
 339                 sata@19000 {
 340                         compatible = "fsl,mpc8377-sata", "fsl,pq-sata";
 341                         reg = <0x19000 0x1000>;
 342                         interrupts = <45 0x8>;
 343                         interrupt-parent = <&ipic>;
 344                         sleep = <&pmc 0x00000030>;
 345                 };
 346
 347                 /* IPIC
 348                  * interrupts cell = <intr #, sense>
 349                  * sense values match linux IORESOURCE_IRQ_* defines:
 350                  * sense == 8: Level, low assertion
 351                  * sense == 2: Edge, high-to-low change
 352                  */
 353                 ipic: interrupt-controller@700 {
 354                         compatible = "fsl,ipic";
 355                         interrupt-controller;
 356                         #address-cells = <0>;
 357                         #interrupt-cells = <2>;
 358                         reg = <0x700 0x100>;
 359                 };
 360
 361                 pmc: power@b00 {
 362                         compatible = "fsl,mpc8377-pmc", "fsl,mpc8349-pmc";
 363                         reg = <0xb00 0x100 0xa00 0x100>;
 364                         interrupts = <80 0x8>;
 365                         interrupt-parent = <&ipic>;
 366                 };
 367         };
 368
 369         pci0: pci@e0008500 {
 370                 interrupt-map-mask = <0xf800 0 0 7>;
 371                 interrupt-map = <
 372                                 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
 373
 374                                 /* IDSEL AD14 IRQ6 inta */
 375                                  0x7000 0x0 0x0 0x1 &ipic 22 0x8
 376
 377                                 /* IDSEL AD15 IRQ5 inta */
 378                                  0x7800 0x0 0x0 0x1 &ipic 21 0x8>;
 379                 interrupt-parent = <&ipic>;
 380                 interrupts = <66 0x8>;
 381                 bus-range = <0 0>;
 382                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 383                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
 384                           0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
 385                 sleep = <&pmc 0x00010000>;
 386                 clock-frequency = <66666666>;
 387                 #interrupt-cells = <1>;
 388                 #size-cells = <2>;
 389                 #address-cells = <3>;
 390                 reg = <0xe0008500 0x100         /* internal registers */
 391                        0xe0008300 0x8>;         /* config space access registers */
 392                 compatible = "fsl,mpc8349-pci";
 393                 device_type = "pci";
 394         };
 395
 396         pci1: pcie@e0009000 {
 397                 #address-cells = <3>;
 398                 #size-cells = <2>;
 399                 #interrupt-cells = <1>;
 400                 device_type = "pci";
 401                 compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
 402                 reg = <0xe0009000 0x00001000>;
 403                 ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000
 404                           0x01000000 0 0x00000000 0xb8000000 0 0x00800000>;
 405                 bus-range = <0 255>;
 406                 interrupt-map-mask = <0xf800 0 0 7>;
 407                 interrupt-map = <0 0 0 1 &ipic 1 8
 408                                  0 0 0 2 &ipic 1 8
 409                                  0 0 0 3 &ipic 1 8
 410                                  0 0 0 4 &ipic 1 8>;
 411                 sleep = <&pmc 0x00300000>;
 412                 clock-frequency = <0>;
 413
 414                 pcie@0 {
 415                         #address-cells = <3>;
 416                         #size-cells = <2>;
 417                         device_type = "pci";
 418                         reg = <0 0 0 0 0>;
 419                         ranges = <0x02000000 0 0xa8000000
 420                                   0x02000000 0 0xa8000000
 421                                   0 0x10000000
 422                                   0x01000000 0 0x00000000
 423                                   0x01000000 0 0x00000000
 424                                   0 0x00800000>;
 425                 };
 426         };
 427
 428         pci2: pcie@e000a000 {
 429                 #address-cells = <3>;
 430                 #size-cells = <2>;
 431                 #interrupt-cells = <1>;
 432                 device_type = "pci";
 433                 compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie";
 434                 reg = <0xe000a000 0x00001000>;
 435                 ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000
 436                           0x01000000 0 0x00000000 0xd8000000 0 0x00800000>;
 437                 bus-range = <0 255>;
 438                 interrupt-map-mask = <0xf800 0 0 7>;
 439                 interrupt-map = <0 0 0 1 &ipic 2 8
 440                                  0 0 0 2 &ipic 2 8
 441                                  0 0 0 3 &ipic 2 8
 442                                  0 0 0 4 &ipic 2 8>;
 443                 sleep = <&pmc 0x000c0000>;
 444                 clock-frequency = <0>;
 445
 446                 pcie@0 {
 447                         #address-cells = <3>;
 448                         #size-cells = <2>;
 449                         device_type = "pci";
 450                         reg = <0 0 0 0 0>;
 451                         ranges = <0x02000000 0 0xc8000000
 452                                   0x02000000 0 0xc8000000
 453                                   0 0x10000000
 454                                   0x01000000 0 0x00000000
 455                                   0x01000000 0 0x00000000
 456                                   0 0x00800000>;
 457                 };
 458         };
 459 };