arch/mips/pnx833x/common/platform.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  *  platform.c: platform support for PNX833X.
   4  *
   5  *  Copyright 2008 NXP Semiconductors
   6  *        Chris Steel <chris.steel@nxp.com>
   7  *    Daniel Laird <daniel.j.laird@nxp.com>
   8  *
   9  *  Based on software written by:
  10  *      Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code.
  11  */
  12 #include <linux/device.h>
  13 #include <linux/dma-mapping.h>
  14 #include <linux/platform_device.h>
  15 #include <linux/kernel.h>
  16 #include <linux/init.h>
  17 #include <linux/resource.h>
  18 #include <linux/serial.h>
  19 #include <linux/serial_pnx8xxx.h>
  20 #include <linux/mtd/platnand.h>
  21
  22 #include <irq.h>
  23 #include <irq-mapping.h>
  24 #include <pnx833x.h>
  25
  26 static u64 uart_dmamask     = DMA_BIT_MASK(32);
  27
  28 static struct resource pnx833x_uart_resources[] = {
  29         [0] = {
  30                 .start          = PNX833X_UART0_PORTS_START,
  31                 .end            = PNX833X_UART0_PORTS_END,
  32                 .flags          = IORESOURCE_MEM,
  33         },
  34         [1] = {
  35                 .start          = PNX833X_PIC_UART0_INT,
  36                 .end            = PNX833X_PIC_UART0_INT,
  37                 .flags          = IORESOURCE_IRQ,
  38         },
  39         [2] = {
  40                 .start          = PNX833X_UART1_PORTS_START,
  41                 .end            = PNX833X_UART1_PORTS_END,
  42                 .flags          = IORESOURCE_MEM,
  43         },
  44         [3] = {
  45                 .start          = PNX833X_PIC_UART1_INT,
  46                 .end            = PNX833X_PIC_UART1_INT,
  47                 .flags          = IORESOURCE_IRQ,
  48         },
  49 };
  50
  51 struct pnx8xxx_port pnx8xxx_ports[] = {
  52         [0] = {
  53                 .port   = {
  54                         .type           = PORT_PNX8XXX,
  55                         .iotype         = UPIO_MEM,
  56                         .membase        = (void __iomem *)PNX833X_UART0_PORTS_START,
  57                         .mapbase        = PNX833X_UART0_PORTS_START,
  58                         .irq            = PNX833X_PIC_UART0_INT,
  59                         .uartclk        = 3692300,
  60                         .fifosize       = 16,
  61                         .flags          = UPF_BOOT_AUTOCONF,
  62                         .line           = 0,
  63                 },
  64         },
  65         [1] = {
  66                 .port   = {
  67                         .type           = PORT_PNX8XXX,
  68                         .iotype         = UPIO_MEM,
  69                         .membase        = (void __iomem *)PNX833X_UART1_PORTS_START,
  70                         .mapbase        = PNX833X_UART1_PORTS_START,
  71                         .irq            = PNX833X_PIC_UART1_INT,
  72                         .uartclk        = 3692300,
  73                         .fifosize       = 16,
  74                         .flags          = UPF_BOOT_AUTOCONF,
  75                         .line           = 1,
  76                 },
  77         },
  78 };
  79
  80 static struct platform_device pnx833x_uart_device = {
  81         .name           = "pnx8xxx-uart",
  82         .id             = -1,
  83         .dev = {
  84                 .dma_mask               = &uart_dmamask,
  85                 .coherent_dma_mask      = DMA_BIT_MASK(32),
  86                 .platform_data          = pnx8xxx_ports,
  87         },
  88         .num_resources  = ARRAY_SIZE(pnx833x_uart_resources),
  89         .resource       = pnx833x_uart_resources,
  90 };
  91
  92 static u64 ehci_dmamask     = DMA_BIT_MASK(32);
  93
  94 static struct resource pnx833x_usb_ehci_resources[] = {
  95         [0] = {
  96                 .start          = PNX833X_USB_PORTS_START,
  97                 .end            = PNX833X_USB_PORTS_END,
  98                 .flags          = IORESOURCE_MEM,
  99         },
 100         [1] = {
 101                 .start          = PNX833X_PIC_USB_INT,
 102                 .end            = PNX833X_PIC_USB_INT,
 103                 .flags          = IORESOURCE_IRQ,
 104         },
 105 };
 106
 107 static struct platform_device pnx833x_usb_ehci_device = {
 108         .name           = "pnx833x-ehci",
 109         .id             = -1,
 110         .dev = {
 111                 .dma_mask               = &ehci_dmamask,
 112                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 113         },
 114         .num_resources  = ARRAY_SIZE(pnx833x_usb_ehci_resources),
 115         .resource       = pnx833x_usb_ehci_resources,
 116 };
 117
 118 static u64 ethernet_dmamask = DMA_BIT_MASK(32);
 119
 120 static struct resource pnx833x_ethernet_resources[] = {
 121         [0] = {
 122                 .start = PNX8335_IP3902_PORTS_START,
 123                 .end   = PNX8335_IP3902_PORTS_END,
 124                 .flags = IORESOURCE_MEM,
 125         },
 126 #ifdef CONFIG_SOC_PNX8335
 127         [1] = {
 128                 .start = PNX8335_PIC_ETHERNET_INT,
 129                 .end   = PNX8335_PIC_ETHERNET_INT,
 130                 .flags = IORESOURCE_IRQ,
 131         },
 132 #endif
 133 };
 134
 135 static struct platform_device pnx833x_ethernet_device = {
 136         .name = "ip3902-eth",
 137         .id   = -1,
 138         .dev  = {
 139                 .dma_mask          = &ethernet_dmamask,
 140                 .coherent_dma_mask = DMA_BIT_MASK(32),
 141         },
 142         .num_resources = ARRAY_SIZE(pnx833x_ethernet_resources),
 143         .resource      = pnx833x_ethernet_resources,
 144 };
 145
 146 static struct resource pnx833x_sata_resources[] = {
 147         [0] = {
 148                 .start = PNX8335_SATA_PORTS_START,
 149                 .end   = PNX8335_SATA_PORTS_END,
 150                 .flags = IORESOURCE_MEM,
 151         },
 152         [1] = {
 153                 .start = PNX8335_PIC_SATA_INT,
 154                 .end   = PNX8335_PIC_SATA_INT,
 155                 .flags = IORESOURCE_IRQ,
 156         },
 157 };
 158
 159 static struct platform_device pnx833x_sata_device = {
 160         .name          = "pnx833x-sata",
 161         .id            = -1,
 162         .num_resources = ARRAY_SIZE(pnx833x_sata_resources),
 163         .resource      = pnx833x_sata_resources,
 164 };
 165
 166 static void
 167 pnx833x_flash_nand_cmd_ctrl(struct nand_chip *this, int cmd, unsigned int ctrl)
 168 {
 169         unsigned long nandaddr = (unsigned long)this->legacy.IO_ADDR_W;
 170
 171         if (cmd == NAND_CMD_NONE)
 172                 return;
 173
 174         if (ctrl & NAND_CLE)
 175                 writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_CLE_MASK));
 176         else
 177                 writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_ALE_MASK));
 178 }
 179
 180 static struct platform_nand_data pnx833x_flash_nand_data = {
 181         .chip = {
 182                 .nr_chips               = 1,
 183                 .chip_delay             = 25,
 184         },
 185         .ctrl = {
 186                 .cmd_ctrl               = pnx833x_flash_nand_cmd_ctrl
 187         }
 188 };
 189
 190 /*
 191  * Set start to be the correct address (PNX8335_NAND_BASE with no 0xb!!),
 192  * 12 bytes more seems to be the standard that allows for NAND access.
 193  */
 194 static struct resource pnx833x_flash_nand_resource = {
 195         .start  = PNX8335_NAND_BASE,
 196         .end    = PNX8335_NAND_BASE + 12,
 197         .flags  = IORESOURCE_MEM,
 198 };
 199
 200 static struct platform_device pnx833x_flash_nand = {
 201         .name           = "gen_nand",
 202         .id                     = -1,
 203         .num_resources  = 1,
 204         .resource           = &pnx833x_flash_nand_resource,
 205         .dev            = {
 206                 .platform_data = &pnx833x_flash_nand_data,
 207         },
 208 };
 209
 210 static struct platform_device *pnx833x_platform_devices[] __initdata = {
 211         &pnx833x_uart_device,
 212         &pnx833x_usb_ehci_device,
 213         &pnx833x_ethernet_device,
 214         &pnx833x_sata_device,
 215         &pnx833x_flash_nand,
 216 };
 217
 218 static int __init pnx833x_platform_init(void)
 219 {
 220         return platform_add_devices(pnx833x_platform_devices,
 221                                     ARRAY_SIZE(pnx833x_platform_devices));
 222 }
 223
 224 arch_initcall(pnx833x_platform_init);