ARM: uniphier: remove ad-hoc pin settings for NAND
[oweals/u-boot.git] / arch / arm / mach-uniphier / board_init.c
1 /*
2  * Copyright (C) 2012-2015 Panasonic Corporation
3  * Copyright (C) 2015-2016 Socionext Inc.
4  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 #include <common.h>
10 #include <libfdt.h>
11 #include <linux/io.h>
12
13 #include "init.h"
14 #include "micro-support-card.h"
15 #include "sg-regs.h"
16 #include "soc-info.h"
17
18 DECLARE_GLOBAL_DATA_PTR;
19
20 static void uniphier_setup_xirq(void)
21 {
22         const void *fdt = gd->fdt_blob;
23         int soc_node, aidet_node;
24         const fdt32_t *val;
25         unsigned long aidet_base;
26         u32 tmp;
27
28         soc_node = fdt_path_offset(fdt, "/soc");
29         if (soc_node < 0)
30                 return;
31
32         aidet_node = fdt_subnode_offset_namelen(fdt, soc_node, "aidet", 5);
33         if (aidet_node < 0)
34                 return;
35
36         val = fdt_getprop(fdt, aidet_node, "reg", NULL);
37         if (!val)
38                 return;
39
40         aidet_base = fdt32_to_cpu(*val);
41
42         tmp = readl(aidet_base + 8);    /* AIDET DETCONFR2 */
43         tmp |= 0x00ff0000;              /* Set XIRQ0-7 low active */
44         writel(tmp, aidet_base + 8);
45
46         tmp = readl(0x55000090);        /* IRQCTL */
47         tmp |= 0x000000ff;
48         writel(tmp, 0x55000090);
49 }
50
51 #ifdef CONFIG_ARCH_UNIPHIER_LD11
52 static void uniphier_ld11_misc_init(void)
53 {
54         sg_set_pinsel(149, 14, 8, 4);   /* XIRQ0    -> XIRQ0 */
55         sg_set_iectrl(149);
56         sg_set_pinsel(153, 14, 8, 4);   /* XIRQ4    -> XIRQ4 */
57         sg_set_iectrl(153);
58 }
59 #endif
60
61 #ifdef CONFIG_ARCH_UNIPHIER_LD20
62 static void uniphier_ld20_misc_init(void)
63 {
64         sg_set_pinsel(149, 14, 8, 4);   /* XIRQ0    -> XIRQ0 */
65         sg_set_iectrl(149);
66         sg_set_pinsel(153, 14, 8, 4);   /* XIRQ4    -> XIRQ4 */
67         sg_set_iectrl(153);
68
69         /* ES1 errata: increase VDD09 supply to suppress VBO noise */
70         if (uniphier_get_soc_revision() == 1) {
71                 writel(0x00000003, 0x6184e004);
72                 writel(0x00000100, 0x6184e040);
73                 writel(0x0000b500, 0x6184e024);
74                 writel(0x00000001, 0x6184e000);
75         }
76 }
77 #endif
78
79 struct uniphier_initdata {
80         unsigned int soc_id;
81         void (*sbc_init)(void);
82         void (*pll_init)(void);
83         void (*clk_init)(void);
84         void (*misc_init)(void);
85 };
86
87 static const struct uniphier_initdata uniphier_initdata[] = {
88 #if defined(CONFIG_ARCH_UNIPHIER_LD4)
89         {
90                 .soc_id = UNIPHIER_LD4_ID,
91                 .sbc_init = uniphier_ld4_sbc_init,
92                 .pll_init = uniphier_ld4_pll_init,
93                 .clk_init = uniphier_ld4_clk_init,
94         },
95 #endif
96 #if defined(CONFIG_ARCH_UNIPHIER_PRO4)
97         {
98                 .soc_id = UNIPHIER_PRO4_ID,
99                 .sbc_init = uniphier_sbc_init_savepin,
100                 .pll_init = uniphier_pro4_pll_init,
101                 .clk_init = uniphier_pro4_clk_init,
102         },
103 #endif
104 #if defined(CONFIG_ARCH_UNIPHIER_SLD8)
105         {
106                 .soc_id = UNIPHIER_SLD8_ID,
107                 .sbc_init = uniphier_ld4_sbc_init,
108                 .pll_init = uniphier_ld4_pll_init,
109                 .clk_init = uniphier_ld4_clk_init,
110         },
111 #endif
112 #if defined(CONFIG_ARCH_UNIPHIER_PRO5)
113         {
114                 .soc_id = UNIPHIER_PRO5_ID,
115                 .sbc_init = uniphier_sbc_init_savepin,
116                 .clk_init = uniphier_pro5_clk_init,
117         },
118 #endif
119 #if defined(CONFIG_ARCH_UNIPHIER_PXS2)
120         {
121                 .soc_id = UNIPHIER_PXS2_ID,
122                 .sbc_init = uniphier_pxs2_sbc_init,
123                 .clk_init = uniphier_pxs2_clk_init,
124         },
125 #endif
126 #if defined(CONFIG_ARCH_UNIPHIER_LD6B)
127         {
128                 .soc_id = UNIPHIER_LD6B_ID,
129                 .sbc_init = uniphier_pxs2_sbc_init,
130                 .clk_init = uniphier_pxs2_clk_init,
131         },
132 #endif
133 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
134         {
135                 .soc_id = UNIPHIER_LD11_ID,
136                 .sbc_init = uniphier_ld11_sbc_init,
137                 .pll_init = uniphier_ld11_pll_init,
138                 .clk_init = uniphier_ld11_clk_init,
139                 .misc_init = uniphier_ld11_misc_init,
140         },
141 #endif
142 #if defined(CONFIG_ARCH_UNIPHIER_LD20)
143         {
144                 .soc_id = UNIPHIER_LD20_ID,
145                 .sbc_init = uniphier_ld11_sbc_init,
146                 .pll_init = uniphier_ld20_pll_init,
147                 .clk_init = uniphier_ld20_clk_init,
148                 .misc_init = uniphier_ld20_misc_init,
149         },
150 #endif
151 #if defined(CONFIG_ARCH_UNIPHIER_PXS3)
152         {
153                 .soc_id = UNIPHIER_PXS3_ID,
154                 .sbc_init = uniphier_pxs2_sbc_init,
155                 .pll_init = uniphier_pxs3_pll_init,
156                 .clk_init = uniphier_pxs3_clk_init,
157         },
158 #endif
159 };
160 UNIPHIER_DEFINE_SOCDATA_FUNC(uniphier_get_initdata, uniphier_initdata)
161
162 int board_init(void)
163 {
164         const struct uniphier_initdata *initdata;
165
166         led_puts("U0");
167
168         initdata = uniphier_get_initdata();
169         if (!initdata) {
170                 pr_err("unsupported SoC\n");
171                 return -EINVAL;
172         }
173
174         initdata->sbc_init();
175
176         support_card_init();
177
178         led_puts("U0");
179
180         if (initdata->pll_init)
181                 initdata->pll_init();
182
183         led_puts("U1");
184
185         if (initdata->clk_init)
186                 initdata->clk_init();
187
188         led_puts("U2");
189
190         if (initdata->misc_init)
191                 initdata->misc_init();
192
193         led_puts("U3");
194
195         uniphier_setup_xirq();
196
197         led_puts("U4");
198
199         support_card_late_init();
200
201         led_puts("Uboo");
202
203         return 0;
204 }