arch/arm/mach-stm32mp/Kconfig

   1 if ARCH_STM32MP
   2
   3 config SPL
   4         select SPL_BOARD_INIT
   5         select SPL_CLK
   6         select SPL_DM
   7         select SPL_DM_SEQ_ALIAS
   8         select SPL_DRIVERS_MISC_SUPPORT
   9         select SPL_FRAMEWORK
  10         select SPL_GPIO_SUPPORT
  11         select SPL_LIBCOMMON_SUPPORT
  12         select SPL_LIBGENERIC_SUPPORT
  13         select SPL_OF_CONTROL
  14         select SPL_OF_TRANSLATE
  15         select SPL_PINCTRL
  16         select SPL_REGMAP
  17         select SPL_DM_RESET
  18         select SPL_SERIAL_SUPPORT
  19         select SPL_SPI_LOAD
  20         select SPL_SYSCON
  21         select SPL_WATCHDOG_SUPPORT if WATCHDOG
  22         imply BOOTSTAGE_STASH if SPL_BOOTSTAGE
  23         imply SPL_BOOTSTAGE if BOOTSTAGE
  24         imply SPL_DISPLAY_PRINT
  25         imply SPL_LIBDISK_SUPPORT
  26
  27 config SYS_SOC
  28         default "stm32mp"
  29
  30 config SYS_MALLOC_LEN
  31         default 0x2000000
  32
  33 config ENV_SIZE
  34         default 0x2000
  35
  36 config STM32MP15x
  37         bool "Support STMicroelectronics STM32MP15x Soc"
  38         select ARCH_SUPPORT_PSCI if !TFABOOT
  39         select ARM_SMCCC if TFABOOT
  40         select CPU_V7A
  41         select CPU_V7_HAS_NONSEC if !TFABOOT
  42         select CPU_V7_HAS_VIRT
  43         select OF_BOARD_SETUP
  44         select PINCTRL_STM32
  45         select STM32_RCC
  46         select STM32_RESET
  47         select STM32_SERIAL
  48         select SYS_ARCH_TIMER
  49         imply SYSRESET_PSCI if TFABOOT
  50         imply SYSRESET_SYSCON if !TFABOOT
  51         help
  52                 support of STMicroelectronics SOC STM32MP15x family
  53                 STM32MP157, STM32MP153 or STM32MP151
  54                 STMicroelectronics MPU with core ARMv7
  55                 dual core A7 for STM32MP157/3, monocore for STM32MP151
  56                 target all the STMicroelectronics board with SOC STM32MP1 family
  57
  58 choice
  59         prompt "STM32MP15x board select"
  60         optional
  61
  62 config TARGET_ST_STM32MP15x
  63         bool "STMicroelectronics STM32MP15x boards"
  64         select STM32MP15x
  65         imply BOOTCOUNT_LIMIT
  66         imply BOOTSTAGE
  67         imply CMD_BOOTCOUNT
  68         imply CMD_BOOTSTAGE
  69         imply CMD_CLS if CMD_BMP
  70         imply DISABLE_CONSOLE
  71         imply PRE_CONSOLE_BUFFER
  72         imply SILENT_CONSOLE
  73         help
  74                 target the STMicroelectronics board with SOC STM32MP15x
  75                 managed by board/st/stm32mp1:
  76                 Evalulation board (EV1) or Discovery board (DK1 and DK2).
  77                 The difference between board are managed with devicetree
  78
  79 config TARGET_DH_STM32MP1_PDK2
  80         bool "DH STM32MP1 PDK2"
  81         select STM32MP15x
  82         imply BOOTCOUNT_LIMIT
  83         imply CMD_BOOTCOUNT
  84         help
  85                 Target the DH PDK2 development kit with STM32MP15x SoM.
  86
  87 endchoice
  88
  89 config SYS_TEXT_BASE
  90         default 0xC0100000
  91
  92 config NR_DRAM_BANKS
  93         default 1
  94
  95 config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_MMC2
  96         hex "Partition on MMC2 to use to load U-Boot from"
  97         depends on SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
  98         default 1
  99         help
 100           Partition on the second MMC to load U-Boot from when the MMC is being
 101           used in raw mode
 102
 103 config STM32_ETZPC
 104         bool "STM32 Extended TrustZone Protection"
 105         depends on STM32MP15x
 106         default y
 107         help
 108           Say y to enable STM32 Extended TrustZone Protection
 109
 110 config CMD_STM32PROG
 111         bool "command stm32prog for STM32CudeProgrammer"
 112         select DFU
 113         select DFU_RAM
 114         select DFU_VIRT
 115         select PARTITION_TYPE_GUID
 116         imply CMD_GPT if MMC
 117         imply CMD_MTD if MTD
 118         imply DFU_MMC if MMC
 119         imply DFU_MTD if MTD
 120         help
 121                 activate a specific command stm32prog for STM32MP soc family
 122                 witch update the device with the tools STM32CubeProgrammer,
 123                 using UART with STM32 protocol or USB with DFU protocol
 124                 NB: access to not volatile memory (NOR/NAND/SD/eMMC) is based
 125                     on U-Boot DFU framework
 126
 127 config CMD_STM32KEY
 128         bool "command stm32key to fuse public key hash"
 129         default y
 130         depends on CMD_FUSE
 131         help
 132                 fuse public key hash in corresponding fuse used to authenticate
 133                 binary.
 134
 135
 136 config PRE_CON_BUF_ADDR
 137         default 0xC02FF000
 138
 139 config PRE_CON_BUF_SZ
 140         default 4096
 141
 142 config BOOTSTAGE_STASH_ADDR
 143         default 0xC3000000
 144
 145 if BOOTCOUNT_LIMIT
 146 config SYS_BOOTCOUNT_SINGLEWORD
 147         default y
 148
 149 # TAMP_BOOTCOUNT = TAMP_BACKUP_REGISTER(21)
 150 config SYS_BOOTCOUNT_ADDR
 151         default 0x5C00A154
 152 endif
 153
 154 if DEBUG_UART
 155
 156 config DEBUG_UART_BOARD_INIT
 157         default y
 158
 159 # debug on UART4 by default
 160 config DEBUG_UART_BASE
 161         default 0x40010000
 162
 163 # clock source is HSI on reset
 164 config DEBUG_UART_CLOCK
 165         default 64000000
 166 endif
 167
 168 source "board/st/stm32mp1/Kconfig"
 169 source "board/dhelectronics/dh_stm32mp1/Kconfig"
 170
 171 endif