3 * HW data initialization for OMAP5
6 * Texas Instruments, <www.ti.com>
8 * Sricharan R <r.sricharan@ti.com>
10 * SPDX-License-Identifier: GPL-2.0+
14 #include <asm/arch/omap.h>
15 #include <asm/arch/sys_proto.h>
16 #include <asm/omap_common.h>
17 #include <asm/arch/clock.h>
18 #include <asm/omap_gpio.h>
22 struct prcm_regs const **prcm =
23 (struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
24 struct dplls const **dplls_data =
25 (struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
26 struct vcores_data const **omap_vcores =
27 (struct vcores_data const **) OMAP_SRAM_SCRATCH_VCORES_PTR;
28 struct omap_sys_ctrl_regs const **ctrl =
29 (struct omap_sys_ctrl_regs const **)OMAP_SRAM_SCRATCH_SYS_CTRL;
31 /* OPP NOM FREQUENCY for ES1.0 */
32 static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = {
33 {200, 2, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
34 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
35 {1000, 20, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
36 {375, 8, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
37 {400, 12, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
38 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
39 {375, 17, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
42 /* OPP NOM FREQUENCY for OMAP5 ES2.0, and DRA7 ES1.0 */
43 static const struct dpll_params mpu_dpll_params_1ghz[NUM_SYS_CLKS] = {
44 {250, 2, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
45 {500, 9, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
46 {119, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
47 {625, 11, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
48 {500, 12, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
49 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
50 {625, 23, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
53 static const struct dpll_params
54 core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = {
55 {266, 2, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 12 MHz */
56 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
57 {443, 6, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 16.8 MHz */
58 {277, 4, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 19.2 MHz */
59 {368, 8, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1}, /* 26 MHz */
60 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
61 {277, 9, 2, 5, 8, 4, 62, 5, -1, 5, 7, -1} /* 38.4 MHz */
64 static const struct dpll_params
65 core_dpll_params_2128mhz_ddr532_es2[NUM_SYS_CLKS] = {
66 {266, 2, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 12 MHz */
67 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
68 {443, 6, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 16.8 MHz */
69 {277, 4, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 19.2 MHz */
70 {368, 8, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6}, /* 26 MHz */
71 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
72 {277, 9, 2, 5, 8, 4, 62, 63, 6, 5, 7, 6} /* 38.4 MHz */
75 static const struct dpll_params
76 core_dpll_params_2128mhz_dra7xx[NUM_SYS_CLKS] = {
77 {266, 2, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 12 MHz */
78 {266, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 20 MHz */
79 {443, 6, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 16.8 MHz */
80 {277, 4, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 19.2 MHz */
81 {368, 8, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 26 MHz */
82 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
83 {277, 9, 2, 1, -1, 4, 62, 5, -1, 5, 4, 6}, /* 38.4 MHz */
86 static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
87 {32, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */
88 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
89 {160, 6, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */
90 {20, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */
91 {192, 12, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */
92 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
93 {10, 0, 4, 3, 6, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */
96 static const struct dpll_params per_dpll_params_768mhz_es2[NUM_SYS_CLKS] = {
97 {32, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 12 MHz */
98 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
99 {160, 6, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 16.8 MHz */
100 {20, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 19.2 MHz */
101 {192, 12, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1}, /* 26 MHz */
102 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
103 {10, 0, 4, 3, 3, 4, -1, 2, -1, -1, -1, -1} /* 38.4 MHz */
106 static const struct dpll_params per_dpll_params_768mhz_dra7xx[NUM_SYS_CLKS] = {
107 {32, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 12 MHz */
108 {96, 4, 4, 1, 3, 4, 10, 2, -1, -1, -1, -1}, /* 20 MHz */
109 {160, 6, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 16.8 MHz */
110 {20, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 19.2 MHz */
111 {192, 12, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 26 MHz */
112 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
113 {10, 0, 4, 1, 3, 4, 4, 2, -1, -1, -1, -1}, /* 38.4 MHz */
116 static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
117 {1165, 11, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
118 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
119 {208, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
120 {182, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
121 {224, 4, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
122 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
123 {91, 2, -1, -1, 5, 6, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
126 static const struct dpll_params iva_dpll_params_2330mhz_dra7xx[NUM_SYS_CLKS] = {
127 {1165, 11, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
128 {233, 3, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
129 {208, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
130 {182, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
131 {224, 4, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
132 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
133 {91, 2, 3, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
136 /* ABE M & N values with sys_clk as source */
137 #ifdef CONFIG_SYS_OMAP_ABE_SYSCK
138 static const struct dpll_params
139 abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
140 {49, 5, 1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
141 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
142 {35, 5, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
143 {46, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
144 {34, 8, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
145 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
146 {64, 24, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
150 /* ABE M & N values with 32K clock as source */
151 #ifndef CONFIG_SYS_OMAP_ABE_SYSCK
152 static const struct dpll_params abe_dpll_params_32k_196608khz = {
153 750, 0, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1
157 /* ABE M & N values with sysclk2(22.5792 MHz) as input */
158 static const struct dpll_params
159 abe_dpll_params_sysclk2_361267khz[NUM_SYS_CLKS] = {
160 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
161 {16, 1, 1, 1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
162 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
163 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
164 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
165 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
166 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
169 static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
170 {400, 4, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
171 {480, 9, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
172 {400, 6, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
173 {400, 7, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
174 {480, 12, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
175 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
176 {400, 15, 2, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
179 static const struct dpll_params ddr_dpll_params_2664mhz[NUM_SYS_CLKS] = {
180 {111, 0, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
181 {333, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
182 {555, 6, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
183 {555, 7, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
184 {666, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
185 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
186 {555, 15, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
189 static const struct dpll_params ddr_dpll_params_2128mhz[NUM_SYS_CLKS] = {
190 {266, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
191 {266, 4, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 20 MHz */
192 {190, 2, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
193 {665, 11, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
194 {532, 12, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
195 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
196 {665, 23, 2, 1, 8, -1, -1, -1, -1, -1, -1, -1}, /* 38.4 MHz */
199 static const struct dpll_params gmac_dpll_params_2000mhz[NUM_SYS_CLKS] = {
200 {250, 2, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 12 MHz */
201 {250, 4, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 20 MHz */
202 {119, 1, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 16.8 MHz */
203 {625, 11, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 19.2 MHz */
204 {500, 12, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 26 MHz */
205 {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
206 {625, 23, 4, 10, 40, 8, 10, -1, -1, -1, -1, -1}, /* 38.4 MHz */
209 struct dplls omap5_dplls_es1 = {
210 .mpu = mpu_dpll_params_800mhz,
211 .core = core_dpll_params_2128mhz_ddr532,
212 .per = per_dpll_params_768mhz,
213 .iva = iva_dpll_params_2330mhz,
214 #ifdef CONFIG_SYS_OMAP_ABE_SYSCK
215 .abe = abe_dpll_params_sysclk_196608khz,
217 .abe = &abe_dpll_params_32k_196608khz,
219 .usb = usb_dpll_params_1920mhz,
223 struct dplls omap5_dplls_es2 = {
224 .mpu = mpu_dpll_params_1ghz,
225 .core = core_dpll_params_2128mhz_ddr532_es2,
226 .per = per_dpll_params_768mhz_es2,
227 .iva = iva_dpll_params_2330mhz,
228 #ifdef CONFIG_SYS_OMAP_ABE_SYSCK
229 .abe = abe_dpll_params_sysclk_196608khz,
231 .abe = &abe_dpll_params_32k_196608khz,
233 .usb = usb_dpll_params_1920mhz,
237 struct dplls dra7xx_dplls = {
238 .mpu = mpu_dpll_params_1ghz,
239 .core = core_dpll_params_2128mhz_dra7xx,
240 .per = per_dpll_params_768mhz_dra7xx,
241 .abe = abe_dpll_params_sysclk2_361267khz,
242 .iva = iva_dpll_params_2330mhz_dra7xx,
243 .usb = usb_dpll_params_1920mhz,
244 .ddr = ddr_dpll_params_2128mhz,
245 .gmac = gmac_dpll_params_2000mhz,
248 struct dplls dra72x_dplls = {
249 .mpu = mpu_dpll_params_1ghz,
250 .core = core_dpll_params_2128mhz_dra7xx,
251 .per = per_dpll_params_768mhz_dra7xx,
252 .abe = abe_dpll_params_sysclk2_361267khz,
253 .iva = iva_dpll_params_2330mhz_dra7xx,
254 .usb = usb_dpll_params_1920mhz,
255 .ddr = ddr_dpll_params_2664mhz,
256 .gmac = gmac_dpll_params_2000mhz,
259 struct pmic_data palmas = {
260 .base_offset = PALMAS_SMPS_BASE_VOLT_UV,
261 .step = 10000, /* 10 mV represented in uV */
263 * Offset codes 1-6 all give the base voltage in Palmas
264 * Offset code 0 switches OFF the SMPS
267 .i2c_slave_addr = SMPS_I2C_SLAVE_ADDR,
268 .pmic_bus_init = sri2c_init,
269 .pmic_write = omap_vc_bypass_send_value,
273 /* The TPS659038 and TPS65917 are software-compatible, use common struct */
274 struct pmic_data tps659038 = {
275 .base_offset = PALMAS_SMPS_BASE_VOLT_UV,
276 .step = 10000, /* 10 mV represented in uV */
278 * Offset codes 1-6 all give the base voltage in Palmas
279 * Offset code 0 switches OFF the SMPS
282 .i2c_slave_addr = TPS659038_I2C_SLAVE_ADDR,
283 .pmic_bus_init = gpi2c_init,
284 .pmic_write = palmas_i2c_write_u8,
288 /* The LP8732 and LP8733 are software-compatible, use common struct */
289 struct pmic_data lp8733 = {
290 .base_offset = LP873X_BUCK_BASE_VOLT_UV,
291 .step = 5000, /* 5 mV represented in uV */
293 * Offset codes 0 - 0x13 Invalid.
294 * Offset codes 0x14 0x17 give 10mV steps
295 * Offset codes 0x17 through 0x9D give 5mV steps
296 * So let us start with our operating range from .73V
299 .i2c_slave_addr = 0x60,
300 .pmic_bus_init = gpi2c_init,
301 .pmic_write = palmas_i2c_write_u8,
304 struct vcores_data omap5430_volts = {
305 .mpu.value[OPP_NOM] = VDD_MPU,
306 .mpu.addr = SMPS_REG_ADDR_12_MPU,
309 .core.value[OPP_NOM] = VDD_CORE,
310 .core.addr = SMPS_REG_ADDR_8_CORE,
311 .core.pmic = &palmas,
313 .mm.value[OPP_NOM] = VDD_MM,
314 .mm.addr = SMPS_REG_ADDR_45_IVA,
318 struct vcores_data omap5430_volts_es2 = {
319 .mpu.value[OPP_NOM] = VDD_MPU_ES2,
320 .mpu.addr = SMPS_REG_ADDR_12_MPU,
322 .mpu.abb_tx_done_mask = OMAP_ABB_MPU_TXDONE_MASK,
324 .core.value[OPP_NOM] = VDD_CORE_ES2,
325 .core.addr = SMPS_REG_ADDR_8_CORE,
326 .core.pmic = &palmas,
328 .mm.value[OPP_NOM] = VDD_MM_ES2,
329 .mm.addr = SMPS_REG_ADDR_45_IVA,
331 .mm.abb_tx_done_mask = OMAP_ABB_MM_TXDONE_MASK,
333 .mpu.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_MPU_OPNO_VMIN,
334 .mpu.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS,
336 .core.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_CORE_OPNO_VMIN,
337 .core.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS,
339 .mm.efuse.reg[OPP_NOM] = OMAP5_ES2_PROD_MM_OPNO_VMIN,
340 .mm.efuse.reg_bits = OMAP5_ES2_PROD_REGBITS,
344 * Enable essential clock domains, modules and
345 * do some additional special settings needed
347 void enable_basic_clocks(void)
349 u32 const clk_domains_essential[] = {
350 (*prcm)->cm_l4per_clkstctrl,
351 (*prcm)->cm_l3init_clkstctrl,
352 (*prcm)->cm_memif_clkstctrl,
353 (*prcm)->cm_l4cfg_clkstctrl,
354 #ifdef CONFIG_DRIVER_TI_CPSW
355 (*prcm)->cm_gmac_clkstctrl,
360 u32 const clk_modules_hw_auto_essential[] = {
361 (*prcm)->cm_l3_gpmc_clkctrl,
362 (*prcm)->cm_memif_emif_1_clkctrl,
363 (*prcm)->cm_memif_emif_2_clkctrl,
364 (*prcm)->cm_l4cfg_l4_cfg_clkctrl,
365 (*prcm)->cm_wkup_gpio1_clkctrl,
366 (*prcm)->cm_l4per_gpio2_clkctrl,
367 (*prcm)->cm_l4per_gpio3_clkctrl,
368 (*prcm)->cm_l4per_gpio4_clkctrl,
369 (*prcm)->cm_l4per_gpio5_clkctrl,
370 (*prcm)->cm_l4per_gpio6_clkctrl,
371 (*prcm)->cm_l4per_gpio7_clkctrl,
372 (*prcm)->cm_l4per_gpio8_clkctrl,
373 #ifdef CONFIG_SCSI_AHCI_PLAT
374 (*prcm)->cm_l3init_ocp2scp3_clkctrl,
379 u32 const clk_modules_explicit_en_essential[] = {
380 (*prcm)->cm_wkup_gptimer1_clkctrl,
381 (*prcm)->cm_l3init_hsmmc1_clkctrl,
382 (*prcm)->cm_l3init_hsmmc2_clkctrl,
383 (*prcm)->cm_l4per_gptimer2_clkctrl,
384 (*prcm)->cm_wkup_wdtimer2_clkctrl,
385 (*prcm)->cm_l4per_uart3_clkctrl,
386 (*prcm)->cm_l4per_i2c1_clkctrl,
387 #ifdef CONFIG_DRIVER_TI_CPSW
388 (*prcm)->cm_gmac_gmac_clkctrl,
391 #ifdef CONFIG_TI_QSPI
392 (*prcm)->cm_l4per_qspi_clkctrl,
394 #ifdef CONFIG_SCSI_AHCI_PLAT
395 (*prcm)->cm_l3init_sata_clkctrl,
400 /* Enable optional additional functional clock for GPIO4 */
401 setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
402 GPIO4_CLKCTRL_OPTFCLKEN_MASK);
404 /* Enable 96 MHz clock for MMC1 & MMC2 */
405 setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
406 HSMMC_CLKCTRL_CLKSEL_MASK);
407 setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
408 HSMMC_CLKCTRL_CLKSEL_MASK);
410 /* Set the correct clock dividers for mmc */
411 setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
412 HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
413 setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
414 HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
416 /* Select 32KHz clock as the source of GPTIMER1 */
417 setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
418 GPTIMER1_CLKCTRL_CLKSEL_MASK);
420 do_enable_clocks(clk_domains_essential,
421 clk_modules_hw_auto_essential,
422 clk_modules_explicit_en_essential,
425 #ifdef CONFIG_TI_QSPI
426 setbits_le32((*prcm)->cm_l4per_qspi_clkctrl, (1<<24));
429 #ifdef CONFIG_SCSI_AHCI_PLAT
430 /* Enable optional functional clock for SATA */
431 setbits_le32((*prcm)->cm_l3init_sata_clkctrl,
432 SATA_CLKCTRL_OPTFCLKEN_MASK);
435 /* Enable SCRM OPT clocks for PER and CORE dpll */
436 setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
437 OPTFCLKEN_SCRM_PER_MASK);
438 setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
439 OPTFCLKEN_SCRM_CORE_MASK);
442 void enable_basic_uboot_clocks(void)
444 u32 const clk_domains_essential[] = {
445 #if defined(CONFIG_DRA7XX)
446 (*prcm)->cm_ipu_clkstctrl,
451 u32 const clk_modules_hw_auto_essential[] = {
452 (*prcm)->cm_l3init_hsusbtll_clkctrl,
456 u32 const clk_modules_explicit_en_essential[] = {
457 (*prcm)->cm_l4per_mcspi1_clkctrl,
458 (*prcm)->cm_l4per_i2c2_clkctrl,
459 (*prcm)->cm_l4per_i2c3_clkctrl,
460 (*prcm)->cm_l4per_i2c4_clkctrl,
461 #if defined(CONFIG_DRA7XX)
462 (*prcm)->cm_ipu_i2c5_clkctrl,
464 (*prcm)->cm_l4per_i2c5_clkctrl,
466 (*prcm)->cm_l3init_hsusbhost_clkctrl,
467 (*prcm)->cm_l3init_fsusb_clkctrl,
470 do_enable_clocks(clk_domains_essential,
471 clk_modules_hw_auto_essential,
472 clk_modules_explicit_en_essential,
476 #ifdef CONFIG_TI_EDMA3
477 void enable_edma3_clocks(void)
479 u32 const clk_domains_edma3[] = {
483 u32 const clk_modules_hw_auto_edma3[] = {
484 (*prcm)->cm_l3main1_tptc1_clkctrl,
485 (*prcm)->cm_l3main1_tptc2_clkctrl,
489 u32 const clk_modules_explicit_en_edma3[] = {
493 do_enable_clocks(clk_domains_edma3,
494 clk_modules_hw_auto_edma3,
495 clk_modules_explicit_en_edma3,
499 void disable_edma3_clocks(void)
501 u32 const clk_domains_edma3[] = {
505 u32 const clk_modules_disable_edma3[] = {
506 (*prcm)->cm_l3main1_tptc1_clkctrl,
507 (*prcm)->cm_l3main1_tptc2_clkctrl,
511 do_disable_clocks(clk_domains_edma3,
512 clk_modules_disable_edma3,
517 #if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP)
518 void enable_usb_clocks(int index)
520 u32 cm_l3init_usb_otg_ss_clkctrl = 0;
523 cm_l3init_usb_otg_ss_clkctrl =
524 (*prcm)->cm_l3init_usb_otg_ss1_clkctrl;
525 /* Enable 960 MHz clock for dwc3 */
526 setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
527 OPTFCLKEN_REFCLK960M);
529 /* Enable 32 KHz clock for USB_PHY1 */
530 setbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
531 USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
533 /* Enable 32 KHz clock for USB_PHY3 */
535 setbits_le32((*prcm)->cm_coreaon_usb_phy3_core_clkctrl,
536 USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
537 } else if (index == 1) {
538 cm_l3init_usb_otg_ss_clkctrl =
539 (*prcm)->cm_l3init_usb_otg_ss2_clkctrl;
540 /* Enable 960 MHz clock for dwc3 */
541 setbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl,
542 OPTFCLKEN_REFCLK960M);
544 /* Enable 32 KHz clock for dwc3 */
545 setbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
546 USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
548 /* Enable 60 MHz clock for USB2PHY2 */
549 setbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl,
550 L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK);
553 u32 const clk_domains_usb[] = {
557 u32 const clk_modules_hw_auto_usb[] = {
558 (*prcm)->cm_l3init_ocp2scp1_clkctrl,
559 cm_l3init_usb_otg_ss_clkctrl,
563 u32 const clk_modules_explicit_en_usb[] = {
567 do_enable_clocks(clk_domains_usb,
568 clk_modules_hw_auto_usb,
569 clk_modules_explicit_en_usb,
573 void disable_usb_clocks(int index)
575 u32 cm_l3init_usb_otg_ss_clkctrl = 0;
578 cm_l3init_usb_otg_ss_clkctrl =
579 (*prcm)->cm_l3init_usb_otg_ss1_clkctrl;
580 /* Disable 960 MHz clock for dwc3 */
581 clrbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl,
582 OPTFCLKEN_REFCLK960M);
584 /* Disable 32 KHz clock for USB_PHY1 */
585 clrbits_le32((*prcm)->cm_coreaon_usb_phy1_core_clkctrl,
586 USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
588 /* Disable 32 KHz clock for USB_PHY3 */
590 clrbits_le32((*prcm)->cm_coreaon_usb_phy3_core_clkctrl,
591 USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
592 } else if (index == 1) {
593 cm_l3init_usb_otg_ss_clkctrl =
594 (*prcm)->cm_l3init_usb_otg_ss2_clkctrl;
595 /* Disable 960 MHz clock for dwc3 */
596 clrbits_le32((*prcm)->cm_l3init_usb_otg_ss2_clkctrl,
597 OPTFCLKEN_REFCLK960M);
599 /* Disable 32 KHz clock for dwc3 */
600 clrbits_le32((*prcm)->cm_coreaon_usb_phy2_core_clkctrl,
601 USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K);
603 /* Disable 60 MHz clock for USB2PHY2 */
604 clrbits_le32((*prcm)->cm_coreaon_l3init_60m_gfclk_clkctrl,
605 L3INIT_CLKCTRL_OPTFCLKEN_60M_GFCLK);
608 u32 const clk_domains_usb[] = {
612 u32 const clk_modules_disable[] = {
613 (*prcm)->cm_l3init_ocp2scp1_clkctrl,
614 cm_l3init_usb_otg_ss_clkctrl,
618 do_disable_clocks(clk_domains_usb,
624 const struct ctrl_ioregs ioregs_omap5430 = {
625 .ctrl_ddrch = DDR_IO_I_34OHM_SR_FASTEST_WD_DQ_NO_PULL_DQS_PULL_DOWN,
626 .ctrl_lpddr2ch = DDR_IO_I_34OHM_SR_FASTEST_WD_CK_CKE_NCS_CA_PULL_DOWN,
627 .ctrl_ddrio_0 = DDR_IO_0_DDR2_DQ_INT_EN_ALL_DDR3_CA_DIS_ALL,
628 .ctrl_ddrio_1 = DDR_IO_1_DQ_OUT_EN_ALL_DQ_INT_EN_ALL,
629 .ctrl_ddrio_2 = DDR_IO_2_CA_OUT_EN_ALL_CA_INT_EN_ALL,
632 const struct ctrl_ioregs ioregs_omap5432_es1 = {
633 .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL,
634 .ctrl_lpddr2ch = 0x0,
635 .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL,
636 .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE,
637 .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE,
638 .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE,
639 .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
640 .ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
643 const struct ctrl_ioregs ioregs_omap5432_es2 = {
644 .ctrl_ddrch = DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2,
645 .ctrl_lpddr2ch = 0x0,
646 .ctrl_ddr3ch = DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2,
647 .ctrl_ddrio_0 = DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2,
648 .ctrl_ddrio_1 = DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2,
649 .ctrl_ddrio_2 = DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2,
650 .ctrl_emif_sdram_config_ext = SDRAM_CONFIG_EXT_RD_LVL_11_SAMPLES,
651 .ctrl_emif_sdram_config_ext_final = SDRAM_CONFIG_EXT_RD_LVL_4_SAMPLES,
654 const struct ctrl_ioregs ioregs_dra7xx_es1 = {
655 .ctrl_ddrch = 0x40404040,
656 .ctrl_lpddr2ch = 0x40404040,
657 .ctrl_ddr3ch = 0x80808080,
658 .ctrl_ddrio_0 = 0x00094A40,
659 .ctrl_ddrio_1 = 0x04A52000,
660 .ctrl_ddrio_2 = 0x84210000,
661 .ctrl_emif_sdram_config_ext = 0x0001C1A7,
662 .ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
663 .ctrl_ddr_ctrl_ext_0 = 0xA2000000,
666 const struct ctrl_ioregs ioregs_dra72x_es1 = {
667 .ctrl_ddrch = 0x40404040,
668 .ctrl_lpddr2ch = 0x40404040,
669 .ctrl_ddr3ch = 0x60606080,
670 .ctrl_ddrio_0 = 0x00094A40,
671 .ctrl_ddrio_1 = 0x04A52000,
672 .ctrl_ddrio_2 = 0x84210000,
673 .ctrl_emif_sdram_config_ext = 0x0001C1A7,
674 .ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
675 .ctrl_ddr_ctrl_ext_0 = 0xA2000000,
678 const struct ctrl_ioregs ioregs_dra72x_es2 = {
679 .ctrl_ddrch = 0x40404040,
680 .ctrl_lpddr2ch = 0x40404040,
681 .ctrl_ddr3ch = 0x60606060,
682 .ctrl_ddrio_0 = 0x00094A40,
683 .ctrl_ddrio_1 = 0x00000000,
684 .ctrl_ddrio_2 = 0x00000000,
685 .ctrl_emif_sdram_config_ext = 0x0001C1A7,
686 .ctrl_emif_sdram_config_ext_final = 0x0001C1A7,
687 .ctrl_ddr_ctrl_ext_0 = 0xA2000000,
690 void __weak hw_data_init(void)
692 u32 omap_rev = omap_revision();
698 *prcm = &omap5_es1_prcm;
699 *dplls_data = &omap5_dplls_es1;
700 *omap_vcores = &omap5430_volts;
706 *prcm = &omap5_es2_prcm;
707 *dplls_data = &omap5_dplls_es2;
708 *omap_vcores = &omap5430_volts_es2;
715 *prcm = &dra7xx_prcm;
716 *dplls_data = &dra7xx_dplls;
717 *ctrl = &dra7xx_ctrl;
722 *prcm = &dra7xx_prcm;
723 *dplls_data = &dra72x_dplls;
724 *ctrl = &dra7xx_ctrl;
728 printf("\n INVALID OMAP REVISION ");
732 void get_ioregs(const struct ctrl_ioregs **regs)
734 u32 omap_rev = omap_revision();
739 *regs = &ioregs_omap5430;
742 *regs = &ioregs_omap5432_es1;
745 *regs = &ioregs_omap5432_es2;
750 *regs = &ioregs_dra7xx_es1;
753 *regs = &ioregs_dra72x_es1;
756 *regs = &ioregs_dra72x_es2;
760 printf("\n INVALID OMAP REVISION ");