2 * Copyright 2016 Texas Instruments, Inc.
4 * SPDX-License-Identifier: GPL-2.0+
8 #include <linux/libfdt.h>
9 #include <fdt_support.h>
12 #include <asm/omap_common.h>
13 #include <asm/arch-omap5/sys_proto.h>
15 #ifdef CONFIG_TI_SECURE_DEVICE
17 /* Give zero values if not already defined */
18 #ifndef TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ
19 #define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ (0)
21 #ifndef CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ
22 #define CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ (0)
25 static u32 hs_irq_skip[] = {
26 8, /* Secure violation reporting interrupt */
27 15, /* One interrupt for SDMA by secure world */
28 118 /* One interrupt for Crypto DMA by secure world */
31 static int ft_hs_fixup_crossbar(void *fdt, bd_t *bd)
36 int len, i, old_cnt, new_cnt;
41 * Increase the size of the fdt
42 * so we have some breathing room
44 ret = fdt_increase_size(fdt, 512);
46 printf("Could not increase size of device tree: %s\n",
51 /* Reserve IRQs that are used/needed by secure world */
52 path = "/ocp/crossbar";
53 offs = fdt_path_offset(fdt, path);
55 debug("Node %s not found.\n", path);
59 /* Get current entries */
60 p_data = fdt_getprop(fdt, offs, "ti,irqs-skip", &len);
62 old_cnt = len / sizeof(u32);
66 new_cnt = sizeof(hs_irq_skip) /
67 sizeof(hs_irq_skip[0]);
69 /* Create new/updated skip list for HS parts */
70 temp = malloc(sizeof(u32) * (old_cnt + new_cnt));
71 for (i = 0; i < new_cnt; i++)
72 temp[i] = cpu_to_fdt32(hs_irq_skip[i]);
73 for (i = 0; i < old_cnt; i++)
74 temp[i + new_cnt] = p_data[i];
76 /* Blow away old data and set new data */
77 fdt_delprop(fdt, offs, "ti,irqs-skip");
78 ret = fdt_setprop(fdt, offs, "ti,irqs-skip",
80 (old_cnt + new_cnt) * sizeof(u32));
83 /* Check if the update worked */
85 printf("Could not add ti,irqs-skip property to node %s: %s\n",
86 path, fdt_strerror(ret));
93 #if ((TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ != 0) || \
94 (CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ != 0))
95 static int ft_hs_fixup_sram(void *fdt, bd_t *bd)
103 * Update SRAM reservations on secure devices. The OCMC RAM
104 * is always reserved for secure use from the start of that
107 path = "/ocp/ocmcram@40300000/sram-hs";
108 offs = fdt_path_offset(fdt, path);
110 debug("Node %s not found.\n", path);
114 /* relative start offset */
115 temp[0] = cpu_to_fdt32(0);
116 /* reservation size */
117 temp[1] = cpu_to_fdt32(max(TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ,
118 CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ));
119 fdt_delprop(fdt, offs, "reg");
120 ret = fdt_setprop(fdt, offs, "reg", temp, 2 * sizeof(u32));
122 printf("Could not add reg property to node %s: %s\n",
123 path, fdt_strerror(ret));
130 static int ft_hs_fixup_sram(void *fdt, bd_t *bd) { return 0; }
133 static void ft_hs_fixups(void *fdt, bd_t *bd)
135 /* Check we are running on an HS/EMU device type */
136 if (GP_DEVICE != get_device_type()) {
137 if ((ft_hs_fixup_crossbar(fdt, bd) == 0) &&
138 (ft_hs_disable_rng(fdt, bd) == 0) &&
139 (ft_hs_fixup_sram(fdt, bd) == 0) &&
140 (ft_hs_fixup_dram(fdt, bd) == 0) &&
141 (ft_hs_add_tee(fdt, bd) == 0))
144 printf("ERROR: Incorrect device type (GP) detected!");
146 /* Fixup failed or wrong device type */
150 static void ft_hs_fixups(void *fdt, bd_t *bd)
153 #endif /* #ifdef CONFIG_TI_SECURE_DEVICE */
155 #if defined(CONFIG_TARGET_DRA7XX_EVM) || defined(CONFIG_TARGET_AM57XX_EVM)
156 #define OPP_DSP_CLK_NUM 3
157 #define OPP_IVA_CLK_NUM 2
158 #define OPP_GPU_CLK_NUM 2
160 const char *dra7_opp_dsp_clk_names[OPP_DSP_CLK_NUM] = {
166 const char *dra7_opp_iva_clk_names[OPP_IVA_CLK_NUM] = {
171 const char *dra7_opp_gpu_clk_names[OPP_GPU_CLK_NUM] = {
176 /* DSPEVE voltage domain */
177 u32 dra7_opp_dsp_clk_rates[NUM_OPPS][OPP_DSP_CLK_NUM] = {
179 {600000000, 600000000, 400000000}, /* OPP_NOM */
180 {700000000, 700000000, 466666667}, /* OPP_OD */
181 {750000000, 750000000, 500000000}, /* OPP_HIGH */
184 /* IVA voltage domain */
185 u32 dra7_opp_iva_clk_rates[NUM_OPPS][OPP_IVA_CLK_NUM] = {
187 {1165000000, 388333334}, /* OPP_NOM */
188 {860000000, 430000000}, /* OPP_OD */
189 {1064000000, 532000000}, /* OPP_HIGH */
192 /* GPU voltage domain */
193 u32 dra7_opp_gpu_clk_rates[NUM_OPPS][OPP_GPU_CLK_NUM] = {
195 {1277000000, 425666667}, /* OPP_NOM */
196 {1000000000, 500000000}, /* OPP_OD */
197 {1064000000, 532000000}, /* OPP_HIGH */
200 static int ft_fixup_clocks(void *fdt, const char **names, u32 *rates, int num)
202 int offs, node_offs, ret, i;
205 offs = fdt_path_offset(fdt, "/ocp/l4@4a000000/cm_core_aon@5000/clocks");
207 debug("Could not find cm_core_aon clocks node path offset : %s\n",
212 for (i = 0; i < num; i++) {
213 node_offs = fdt_subnode_offset(fdt, offs, names[i]);
215 debug("Could not find clock sub-node %s: %s\n",
216 names[i], fdt_strerror(node_offs));
220 phandle = fdt_get_phandle(fdt, node_offs);
222 debug("Could not find phandle for clock %s\n",
227 ret = fdt_setprop_u32(fdt, node_offs, "assigned-clocks",
230 debug("Could not add assigned-clocks property to clock node %s: %s\n",
231 names[i], fdt_strerror(ret));
235 ret = fdt_setprop_u32(fdt, node_offs, "assigned-clock-rates",
238 debug("Could not add assigned-clock-rates property to clock node %s: %s\n",
239 names[i], fdt_strerror(ret));
247 static void ft_opp_clock_fixups(void *fdt, bd_t *bd)
249 const char **clk_names;
253 if (!is_dra72x() && !is_dra7xx())
256 /* fixup DSP clocks */
257 clk_names = dra7_opp_dsp_clk_names;
258 clk_rates = dra7_opp_dsp_clk_rates[get_voltrail_opp(VOLT_EVE)];
259 ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_DSP_CLK_NUM);
261 printf("ft_fixup_clocks failed for DSP voltage domain: %s\n",
266 /* fixup IVA clocks */
267 clk_names = dra7_opp_iva_clk_names;
268 clk_rates = dra7_opp_iva_clk_rates[get_voltrail_opp(VOLT_IVA)];
269 ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_IVA_CLK_NUM);
271 printf("ft_fixup_clocks failed for IVA voltage domain: %s\n",
276 /* fixup GPU clocks */
277 clk_names = dra7_opp_gpu_clk_names;
278 clk_rates = dra7_opp_gpu_clk_rates[get_voltrail_opp(VOLT_GPU)];
279 ret = ft_fixup_clocks(fdt, clk_names, clk_rates, OPP_GPU_CLK_NUM);
281 printf("ft_fixup_clocks failed for GPU voltage domain: %s\n",
287 static void ft_opp_clock_fixups(void *fdt, bd_t *bd) { }
288 #endif /* CONFIG_TARGET_DRA7XX_EVM || CONFIG_TARGET_AM57XX_EVM */
291 * Place for general cpu/SoC FDT fixups. Board specific
292 * fixups should remain in the board files which is where
293 * this function should be called from.
295 void ft_cpu_setup(void *fdt, bd_t *bd)
297 ft_hs_fixups(fdt, bd);
298 ft_opp_clock_fixups(fdt, bd);