6 DRA7xx is an OMAP based SOC with Dual Core A-15s.
9 prompt "OMAP5 board select"
12 config TARGET_CL_SOM_AM57X
13 bool "CompuLab CL-SOM-AM57x"
17 bool "CompuLab CM-T54"
19 config TARGET_OMAP5_UEVM
20 bool "TI OMAP5 uEVM board"
22 config TARGET_DRA7XX_EVM
24 select BOARD_LATE_INIT
26 select TI_I2C_BOARD_DETECT
29 config TARGET_AM57XX_EVM
31 select BOARD_LATE_INIT
33 select TI_I2C_BOARD_DETECT
40 config TI_SECURE_EMIF_REGION_START
41 hex "Reserved EMIF region start address"
42 depends on TI_SECURE_DEVICE
45 Reserved EMIF region start address. Set to "0" to auto-select
46 to be at the end of the external memory region.
48 config TI_SECURE_EMIF_TOTAL_REGION_SIZE
49 hex "Reserved EMIF region size"
50 depends on TI_SECURE_DEVICE
53 Total reserved EMIF region size. Default is 0, which means no reserved EMIF
54 region on secure devices.
56 config TI_SECURE_EMIF_PROTECTED_REGION_SIZE
57 hex "Size of protected region within reserved EMIF region"
58 depends on TI_SECURE_DEVICE
61 This config option is used to specify the size of the portion of the total
62 reserved EMIF region set aside for secure OS needs that will be protected
63 using hardware memory firewalls. This value must be smaller than the
64 TI_SECURE_EMIF_TOTAL_REGION_SIZE value.
66 config OMAP_PLATFORM_RESET_TIME_MAX_USEC
71 Most OMAPs' provide a way to specify the time for which the reset
72 should be held low while the voltages and Oscillator outputs
74 This time is mostly board and PMIC dependent. Hence the boards are
75 expected to specify a pre-computed time using the above option.
76 This value can be computed using a summation of the below 3
78 1: Time taken by the Osciallator to stop and restart
80 3: Voltage ramp time, which can be derived using the PMIC slew rate
81 and value of voltage ramp needed.
83 if TARGET_DRA7XX_EVM || TARGET_AM57XX_EVM
84 menu "Voltage Domain OPP selections"
87 prompt "MPU Voltage Domain"
88 default DRA7_MPU_OPP_NOM
90 Select the Operating Performance Point(OPP) for the MPU voltage
91 domain on DRA7xx & AM57xx SoCs.
93 config DRA7_MPU_OPP_NOM
96 This config option enables Normal OPP for MPU. This is the safest
102 prompt "DSPEVE Voltage Domain"
104 Select the Operating Performance Point(OPP) for the DSPEVE voltage
105 domain on DRA7xx & AM57xx SoCs.
107 config DRA7_DSPEVE_OPP_NOM
110 This config option enables Normal OPP for DSPEVE. This is the safest
111 option for booting and choose this when unsure about other OPPs .
113 config DRA7_DSPEVE_OPP_OD
116 This config option enables Over drive OPP for DSPEVE.
118 config DRA7_DSPEVE_OPP_HIGH
121 This config option enables High OPP for DSPEVE.
126 prompt "IVA Voltage Domain"
128 Select the Operating Performance Point(OPP) for the IVA voltage
129 domain on DRA7xx & AM57xx SoCs.
131 config DRA7_IVA_OPP_NOM
134 This config option enables Normal OPP for IVA. This is the safest
135 option for booting and choose this when unsure about other OPPs .
137 config DRA7_IVA_OPP_OD
140 This config option enables Over drive OPP for IVA.
142 config DRA7_IVA_OPP_HIGH
145 This config option enables High OPP for IVA.
150 prompt "GPU Voltage Domain"
152 Select the Operating Performance Point(OPP) for the GPU voltage
153 domain on DRA7xx & AM57xx SoCs.
155 config DRA7_GPU_OPP_NOM
158 This config option enables Normal OPP for GPU. This is the safest
159 option for booting and choose this when unsure about other OPPs .
161 config DRA7_GPU_OPP_OD
164 This config option enables Over drive OPP for GPU.
166 config DRA7_GPU_OPP_HIGH
169 This config option enables High OPP for GPU.
176 source "board/compulab/cl-som-am57x/Kconfig"
177 source "board/compulab/cm_t54/Kconfig"
178 source "board/ti/omap5_uevm/Kconfig"
179 source "board/ti/dra7xx/Kconfig"
180 source "board/ti/am57xx/Kconfig"