4 * Common board functions for AM33XX based boards
6 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
8 * SPDX-License-Identifier: GPL-2.0+
13 #include <debug_uart.h>
17 #include <asm/arch/cpu.h>
18 #include <asm/arch/hardware.h>
19 #include <asm/arch/omap.h>
20 #include <asm/arch/ddr_defs.h>
21 #include <asm/arch/clock.h>
22 #include <asm/arch/gpio.h>
23 #include <asm/arch/mem.h>
24 #include <asm/arch/mmc_host_def.h>
25 #include <asm/arch/sys_proto.h>
29 #include <asm/omap_common.h>
33 #include <linux/errno.h>
34 #include <linux/compiler.h>
35 #include <linux/usb/ch9.h>
36 #include <linux/usb/gadget.h>
37 #include <linux/usb/musb.h>
38 #include <asm/omap_musb.h>
39 #include <asm/davinci_rtc.h>
41 DECLARE_GLOBAL_DATA_PTR;
45 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
49 /* dram_init must store complete ramsize in gd->ram_size */
50 gd->ram_size = get_ram_size(
51 (void *)CONFIG_SYS_SDRAM_BASE,
52 CONFIG_MAX_RAM_BANK_SIZE);
56 int dram_init_banksize(void)
58 gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
59 gd->bd->bi_dram[0].size = gd->ram_size;
64 #if !CONFIG_IS_ENABLED(OF_CONTROL)
65 static const struct ns16550_platdata am33xx_serial[] = {
66 { .base = CONFIG_SYS_NS16550_COM1, .reg_shift = 2,
67 .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
68 # ifdef CONFIG_SYS_NS16550_COM2
69 { .base = CONFIG_SYS_NS16550_COM2, .reg_shift = 2,
70 .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
71 # ifdef CONFIG_SYS_NS16550_COM3
72 { .base = CONFIG_SYS_NS16550_COM3, .reg_shift = 2,
73 .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
74 { .base = CONFIG_SYS_NS16550_COM4, .reg_shift = 2,
75 .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
76 { .base = CONFIG_SYS_NS16550_COM5, .reg_shift = 2,
77 .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
78 { .base = CONFIG_SYS_NS16550_COM6, .reg_shift = 2,
79 .clock = CONFIG_SYS_NS16550_CLK, .fcr = UART_FCR_DEFVAL, },
84 U_BOOT_DEVICES(am33xx_uarts) = {
85 { "ns16550_serial", &am33xx_serial[0] },
86 # ifdef CONFIG_SYS_NS16550_COM2
87 { "ns16550_serial", &am33xx_serial[1] },
88 # ifdef CONFIG_SYS_NS16550_COM3
89 { "ns16550_serial", &am33xx_serial[2] },
90 { "ns16550_serial", &am33xx_serial[3] },
91 { "ns16550_serial", &am33xx_serial[4] },
92 { "ns16550_serial", &am33xx_serial[5] },
98 static const struct omap_gpio_platdata am33xx_gpio[] = {
99 { 0, AM33XX_GPIO0_BASE },
100 { 1, AM33XX_GPIO1_BASE },
101 { 2, AM33XX_GPIO2_BASE },
102 { 3, AM33XX_GPIO3_BASE },
104 { 4, AM33XX_GPIO4_BASE },
105 { 5, AM33XX_GPIO5_BASE },
109 U_BOOT_DEVICES(am33xx_gpios) = {
110 { "gpio_omap", &am33xx_gpio[0] },
111 { "gpio_omap", &am33xx_gpio[1] },
112 { "gpio_omap", &am33xx_gpio[2] },
113 { "gpio_omap", &am33xx_gpio[3] },
115 { "gpio_omap", &am33xx_gpio[4] },
116 { "gpio_omap", &am33xx_gpio[5] },
122 #ifndef CONFIG_DM_GPIO
123 static const struct gpio_bank gpio_bank_am33xx[] = {
124 { (void *)AM33XX_GPIO0_BASE },
125 { (void *)AM33XX_GPIO1_BASE },
126 { (void *)AM33XX_GPIO2_BASE },
127 { (void *)AM33XX_GPIO3_BASE },
129 { (void *)AM33XX_GPIO4_BASE },
130 { (void *)AM33XX_GPIO5_BASE },
134 const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
137 #if defined(CONFIG_MMC_OMAP_HS)
138 int cpu_mmc_init(bd_t *bis)
142 ret = omap_mmc_init(0, 0, 0, -1, -1);
146 return omap_mmc_init(1, 0, 0, -1, -1);
150 /* AM33XX has two MUSB controllers which can be host or gadget */
151 #if (defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)) && \
152 (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1)) && \
153 (!defined(CONFIG_DM_USB))
154 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
156 /* USB 2.0 PHY Control */
157 #define CM_PHY_PWRDN (1 << 0)
158 #define CM_PHY_OTG_PWRDN (1 << 1)
159 #define OTGVDET_EN (1 << 19)
160 #define OTGSESSENDEN (1 << 20)
162 static void am33xx_usb_set_phy_power(u8 on, u32 *reg_addr)
165 clrsetbits_le32(reg_addr, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN,
166 OTGVDET_EN | OTGSESSENDEN);
168 clrsetbits_le32(reg_addr, 0, CM_PHY_PWRDN | CM_PHY_OTG_PWRDN);
172 static struct musb_hdrc_config musb_config = {
179 #ifdef CONFIG_AM335X_USB0
180 static void am33xx_otg0_set_phy_power(struct udevice *dev, u8 on)
182 am33xx_usb_set_phy_power(on, &cdev->usb_ctrl0);
185 struct omap_musb_board_data otg0_board_data = {
186 .set_phy_power = am33xx_otg0_set_phy_power,
189 static struct musb_hdrc_platform_data otg0_plat = {
190 .mode = CONFIG_AM335X_USB0_MODE,
191 .config = &musb_config,
193 .platform_ops = &musb_dsps_ops,
194 .board_data = &otg0_board_data,
198 #ifdef CONFIG_AM335X_USB1
199 static void am33xx_otg1_set_phy_power(struct udevice *dev, u8 on)
201 am33xx_usb_set_phy_power(on, &cdev->usb_ctrl1);
204 struct omap_musb_board_data otg1_board_data = {
205 .set_phy_power = am33xx_otg1_set_phy_power,
208 static struct musb_hdrc_platform_data otg1_plat = {
209 .mode = CONFIG_AM335X_USB1_MODE,
210 .config = &musb_config,
212 .platform_ops = &musb_dsps_ops,
213 .board_data = &otg1_board_data,
217 int arch_misc_init(void)
219 #ifdef CONFIG_AM335X_USB0
220 musb_register(&otg0_plat, &otg0_board_data,
221 (void *)USB0_OTG_BASE);
223 #ifdef CONFIG_AM335X_USB1
224 musb_register(&otg1_plat, &otg1_board_data,
225 (void *)USB1_OTG_BASE);
230 #else /* CONFIG_USB_MUSB_* && CONFIG_AM335X_USB* && !CONFIG_DM_USB */
232 int arch_misc_init(void)
237 ret = uclass_first_device(UCLASS_MISC, &dev);
241 #if defined(CONFIG_DM_ETH) && defined(CONFIG_USB_ETHER)
242 ret = usb_ether_init();
244 pr_err("USB ether init failed\n");
252 #endif /* CONFIG_USB_MUSB_* && CONFIG_AM335X_USB* && !CONFIG_DM_USB */
254 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
256 * In the case of non-SPL based booting we'll want to call these
257 * functions a tiny bit later as it will require gd to be set and cleared
258 * and that's not true in s_init in this case so we cannot do it there.
260 int board_early_init_f(void)
269 * This function is the place to do per-board things such as ramp up the
270 * MPU clock frequency.
272 __weak void am33xx_spl_board_init(void)
276 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
277 static void rtc32k_enable(void)
279 struct davinci_rtc *rtc = (struct davinci_rtc *)RTC_BASE;
282 * Unlock the RTC's registers. For more details please see the
283 * RTC_SS section of the TRM. In order to unlock we need to
284 * write these specific values (keys) in this order.
286 writel(RTC_KICK0R_WE, &rtc->kick0r);
287 writel(RTC_KICK1R_WE, &rtc->kick1r);
289 /* Enable the RTC 32K OSC by setting bits 3 and 6. */
290 writel((1 << 3) | (1 << 6), &rtc->osc);
294 static void uart_soft_reset(void)
296 struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
299 regval = readl(&uart_base->uartsyscfg);
300 regval |= UART_RESET;
301 writel(regval, &uart_base->uartsyscfg);
302 while ((readl(&uart_base->uartsyssts) &
303 UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
306 /* Disable smart idle */
307 regval = readl(&uart_base->uartsyscfg);
308 regval |= UART_SMART_IDLE_EN;
309 writel(regval, &uart_base->uartsyscfg);
312 static void watchdog_disable(void)
314 struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
316 writel(0xAAAA, &wdtimer->wdtwspr);
317 while (readl(&wdtimer->wdtwwps) != 0x0)
319 writel(0x5555, &wdtimer->wdtwspr);
320 while (readl(&wdtimer->wdtwwps) != 0x0)
328 void early_system_init(void)
331 * The ROM will only have set up sufficient pinmux to allow for the
332 * first 4KiB NOR to be read, we must finish doing what we know of
333 * the NOR mux in this space in order to continue.
335 #ifdef CONFIG_NOR_BOOT
336 enable_norboot_pin_mux();
340 setup_early_clocks();
342 #ifdef CONFIG_SPL_BUILD
344 * Save the boot parameters passed from romcode.
345 * We cannot delay the saving further than this,
346 * to prevent overwrites.
348 save_omap_boot_params();
350 #ifdef CONFIG_DEBUG_UART_OMAP
353 #ifdef CONFIG_TI_I2C_BOARD_DETECT
356 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
357 /* Enable RTC32K clock */
362 #ifdef CONFIG_SPL_BUILD
363 void board_init_f(ulong dummy)
367 board_early_init_f();
369 /* dram_init must store complete ramsize in gd->ram_size */
370 gd->ram_size = get_ram_size(
371 (void *)CONFIG_SYS_SDRAM_BASE,
372 CONFIG_MAX_RAM_BANK_SIZE);
378 int arch_cpu_init_dm(void)
381 #ifndef CONFIG_SKIP_LOWLEVEL_INIT