8 prompt "AM33xx board select"
11 config TARGET_AM335X_EVM
12 bool "Support am335x_evm"
13 select BOARD_LATE_INIT
17 select TI_I2C_BOARD_DETECT
21 imply SPL_GPIO_SUPPORT
23 imply SPL_LIBCOMMON_SUPPORT
24 imply SPL_LIBDISK_SUPPORT
25 imply SPL_LIBGENERIC_SUPPORT
27 imply SPL_NAND_SUPPORT
28 imply SPL_POWER_SUPPORT
29 imply SPL_SERIAL_SUPPORT
30 imply SPL_WATCHDOG_SUPPORT
31 imply SPL_YMODEM_SUPPORT
33 This option specifies support for the AM335x
34 GP and HS EVM development platforms. The AM335x
35 GP EVM is a standalone test, development, and
36 evaluation module system that enables developers
37 to write software and develop hardware around
38 an AM335x processor subsystem.
40 config TARGET_AM335X_BALTOS
41 bool "Support am335x_baltos"
42 select BOARD_LATE_INIT
47 config TARGET_AM335X_IGEP003X
48 bool "Support am335x_igep003x"
49 select BOARD_LATE_INIT
54 config TARGET_AM335X_SHC
55 bool "Support am335x based shc board from bosch"
56 select BOARD_LATE_INIT
61 config TARGET_AM335X_SL50
62 bool "Support am335x_sl50"
63 select BOARD_LATE_INIT
69 bool "Support bav335x"
70 select BOARD_LATE_INIT
74 The BAV335x OEM Network Processor integrates all the functions of an
75 embedded network computer in a small, easy to use SODIMM module which
76 incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8
77 processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit
78 ethernet with simple connection to external connectors.
80 For more information, visit: http://birdland.com/oem
82 config TARGET_CHILIBOARD
83 bool "Grinn chiliBoard"
84 select AM33XX_CHILISOM
85 select BOARD_LATE_INIT
90 bool "Support cm_t335"
101 config TARGET_PENGWYN
102 bool "Support pengwyn"
108 bool "Support pepper"
119 config TARGET_AM43XX_EVM
120 bool "Support am43xx_evm"
121 select BOARD_LATE_INIT
122 select TI_I2C_BOARD_DETECT
128 imply SPL_ENV_SUPPORT
129 imply SPL_EXT_SUPPORT
130 imply SPL_FAT_SUPPORT
131 imply SPL_GPIO_SUPPORT
132 imply SPL_I2C_SUPPORT
133 imply SPL_LIBCOMMON_SUPPORT
134 imply SPL_LIBDISK_SUPPORT
135 imply SPL_LIBGENERIC_SUPPORT
136 imply SPL_MMC_SUPPORT
137 imply SPL_NAND_SUPPORT
138 imply SPL_POWER_SUPPORT
139 imply SPL_SERIAL_SUPPORT
140 imply SPL_WATCHDOG_SUPPORT
141 imply SPL_YMODEM_SUPPORT
143 This option specifies support for the AM43xx
144 GP and HS EVM development platforms.The AM437x
145 GP EVM is a standalone test, development, and
146 evaluation module system that enables developers
147 to write software and develop hardware around
148 an AM43xx processor subsystem.
152 config ISW_ENTRY_ADDR
153 hex "Address in memory or XIP flash of bootloader entry point"
155 After any reset, the boot ROM on the AM43XX SOC
156 searches the boot media for a valid boot image.
157 For non-XIP devices, the ROM then copies the
158 image into internal memory.
159 For all boot modes, after the ROM processes the
160 boot image it eventually computes the entry
161 point address depending on the device type
162 (secure/non-secure), boot media (xip/non-xip) and
164 default 0x402F4000 if AM43XX
165 default 0x402F0400 if AM33XX
167 config PUB_ROM_DATA_SIZE
168 hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
170 During the device boot, the public ROM uses the top of
171 the public L3 OCMC RAM to store r/w data like stack,
172 heap, globals etc. When the ROM is copying the boot
173 image from the boot media into memory, the image must
174 not spill over into this area. This value can be used
175 during compile time to determine the maximum size of a
176 boot image. Once the ROM transfers control to the boot
177 image, this area is no longer used, and can be reclaimed
178 for run time use by the boot image.