3 config TARGET_TI816X_EVM
4 bool "Support ti816x_evm"
6 This option specifies support for the TI8168 EVM development platform
7 with PG2.0 silicon and DDR3 DRAM.
13 config TARGET_TI814X_EVM
14 bool "Support ti814x_evm"
16 This option specifies support for the TI8148
17 EVM development platform.
23 config AM33XX_CHILISOM
28 prompt "AM33xx board select"
30 config TARGET_AM335X_EVM
31 bool "Support am335x_evm"
32 select BOARD_LATE_INIT
36 select TI_I2C_BOARD_DETECT
40 imply SPL_GPIO_SUPPORT
42 imply SPL_LIBCOMMON_SUPPORT
43 imply SPL_LIBDISK_SUPPORT
44 imply SPL_LIBGENERIC_SUPPORT
46 imply SPL_NAND_SUPPORT
47 imply SPL_POWER_SUPPORT
48 imply SPL_SERIAL_SUPPORT
49 imply SPL_WATCHDOG_SUPPORT
50 imply SPL_YMODEM_SUPPORT
51 imply SPL_SYS_MALLOC_SIMPLE
52 imply SPL_SEPARATE_BSS
54 imply SPL_DM_SEQ_ALIAS
57 This option specifies support for the AM335x
58 GP and HS EVM development platforms. The AM335x
59 GP EVM is a standalone test, development, and
60 evaluation module system that enables developers
61 to write software and develop hardware around
62 an AM335x processor subsystem.
64 config TARGET_AM335X_BALTOS
65 bool "Support am335x_baltos"
66 select BOARD_LATE_INIT
71 config TARGET_AM335X_IGEP003X
72 bool "Support am335x_igep003x"
73 select BOARD_LATE_INIT
78 config TARGET_AM335X_SHC
79 bool "Support am335x based shc board from bosch"
80 select BOARD_LATE_INIT
86 config TARGET_AM335X_SL50
87 bool "Support am335x_sl50"
88 select BOARD_LATE_INIT
94 bool "Support bav335x"
95 select BOARD_LATE_INIT
99 The BAV335x OEM Network Processor integrates all the functions of an
100 embedded network computer in a small, easy to use SODIMM module which
101 incorporates the popular Texas Instruments Sitara 32bit ARM Coretex-A8
102 processor, with fast DDR3 512MB SDRAM, 4GB of embedded MMC and a Gigabit
103 ethernet with simple connection to external connectors.
105 For more information, visit: http://birdland.com/oem
108 bool "Support BRXRE1"
109 select BOARD_LATE_INIT
112 bool "Support BRPPT1"
113 select BOARD_LATE_INIT
115 config TARGET_CHILIBOARD
116 bool "Grinn chiliBoard"
117 select AM33XX_CHILISOM
118 select BOARD_LATE_INIT
122 config TARGET_CM_T335
123 bool "Support cm_t335"
130 select BOARD_LATE_INIT
136 bool "Support etamin"
137 select BOARD_LATE_INIT
143 bool "Support pcm051"
148 config TARGET_PENGWYN
149 bool "Support pengwyn"
155 bool "Support pepper"
162 select BOARD_LATE_INIT
167 config TARGET_RASTABAN
168 bool "Support rastaban"
169 select BOARD_LATE_INIT
176 select BOARD_LATE_INIT
182 bool "Support thuban"
183 select BOARD_LATE_INIT
189 bool "Support PDU001"
193 Support for PDU001 platform developed by EETS GmbH.
194 The PDU001 is a processor and display unit developed around
195 the Computing-Module m2 from bytes at work AG.
204 prompt "AM43xx board select"
206 config TARGET_AM43XX_EVM
207 bool "Support am43xx_evm"
208 select BOARD_LATE_INIT
209 select TI_I2C_BOARD_DETECT
215 imply SPL_ENV_SUPPORT
216 imply SPL_EXT_SUPPORT
217 imply SPL_FAT_SUPPORT
218 imply SPL_GPIO_SUPPORT
219 imply SPL_I2C_SUPPORT
220 imply SPL_LIBCOMMON_SUPPORT
221 imply SPL_LIBDISK_SUPPORT
222 imply SPL_LIBGENERIC_SUPPORT
223 imply SPL_MMC_SUPPORT
224 imply SPL_NAND_SUPPORT
225 imply SPL_POWER_SUPPORT
226 imply SPL_SERIAL_SUPPORT
227 imply SPL_WATCHDOG_SUPPORT
228 imply SPL_YMODEM_SUPPORT
230 This option specifies support for the AM43xx
231 GP and HS EVM development platforms.The AM437x
232 GP EVM is a standalone test, development, and
233 evaluation module system that enables developers
234 to write software and develop hardware around
235 an AM43xx processor subsystem.
238 bool "Support cm_t43"
242 config SPL_RTC_DDR_SUPPORT
245 prompt "Enable RTC-DDR ONLY Support"
247 If you want RTC-DDR ONLY Support, say Y. RTC Only with DDR in
248 self-refresh mode is a special power saving mode where in all
249 the other voltages are turned off apart from the RTC domain and DDR.
250 So only RTC is alive and ticking and one can program it to wake
251 up after a predetermined period. Once RTC alarm fires, the PMIC
252 powers up all the voltage domains. U-Boot takes a special path
253 as the DDR has contents is in self-refresh and restore path is
259 config ISW_ENTRY_ADDR
260 hex "Address in memory or XIP flash of bootloader entry point"
262 After any reset, the boot ROM on the AM43XX SOC
263 searches the boot media for a valid boot image.
264 For non-XIP devices, the ROM then copies the
265 image into internal memory.
266 For all boot modes, after the ROM processes the
267 boot image it eventually computes the entry
268 point address depending on the device type
269 (secure/non-secure), boot media (xip/non-xip) and
271 default 0x402F4000 if AM43XX
272 default 0x402F0400 if AM33XX
274 config PUB_ROM_DATA_SIZE
275 hex "Size in bytes of the L3 SRAM reserved by ROM to store data"
277 During the device boot, the public ROM uses the top of
278 the public L3 OCMC RAM to store r/w data like stack,
279 heap, globals etc. When the ROM is copying the boot
280 image from the boot media into memory, the image must
281 not spill over into this area. This value can be used
282 during compile time to determine the maximum size of a
283 boot image. Once the ROM transfers control to the boot
284 image, this area is no longer used, and can be reclaimed
285 for run time use by the boot image.