Linux-libre 5.3.12-gnu
[librecmc/linux-libre.git] / arch / arm / mach-mvebu / kirkwood.c
1 /*
2  * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
3  *
4  * arch/arm/mach-mvebu/kirkwood.c
5  *
6  * Flattened Device Tree board initialization
7  *
8  * This file is licensed under the terms of the GNU General Public
9  * License version 2.  This program is licensed "as is" without any
10  * warranty of any kind, whether express or implied.
11  */
12
13 #include <linux/clk.h>
14 #include <linux/kernel.h>
15 #include <linux/init.h>
16 #include <linux/mbus.h>
17 #include <linux/of.h>
18 #include <linux/of_address.h>
19 #include <linux/of_net.h>
20 #include <linux/of_platform.h>
21 #include <linux/slab.h>
22 #include <asm/hardware/cache-feroceon-l2.h>
23 #include <asm/mach/arch.h>
24 #include <asm/mach/map.h>
25 #include "kirkwood.h"
26 #include "kirkwood-pm.h"
27 #include "common.h"
28
29 static struct resource kirkwood_cpufreq_resources[] = {
30         [0] = {
31                 .start  = CPU_CONTROL_PHYS,
32                 .end    = CPU_CONTROL_PHYS + 3,
33                 .flags  = IORESOURCE_MEM,
34         },
35 };
36
37 static struct platform_device kirkwood_cpufreq_device = {
38         .name           = "kirkwood-cpufreq",
39         .id             = -1,
40         .num_resources  = ARRAY_SIZE(kirkwood_cpufreq_resources),
41         .resource       = kirkwood_cpufreq_resources,
42 };
43
44 static void __init kirkwood_cpufreq_init(void)
45 {
46         platform_device_register(&kirkwood_cpufreq_device);
47 }
48
49 static struct resource kirkwood_cpuidle_resource[] = {
50         {
51                 .flags  = IORESOURCE_MEM,
52                 .start  = DDR_OPERATION_BASE,
53                 .end    = DDR_OPERATION_BASE + 3,
54         },
55 };
56
57 static struct platform_device kirkwood_cpuidle = {
58         .name           = "kirkwood_cpuidle",
59         .id             = -1,
60         .resource       = kirkwood_cpuidle_resource,
61         .num_resources  = 1,
62 };
63
64 static void __init kirkwood_cpuidle_init(void)
65 {
66         platform_device_register(&kirkwood_cpuidle);
67 }
68
69 #define MV643XX_ETH_MAC_ADDR_LOW        0x0414
70 #define MV643XX_ETH_MAC_ADDR_HIGH       0x0418
71
72 static void __init kirkwood_dt_eth_fixup(void)
73 {
74         struct device_node *np;
75
76         /*
77          * The ethernet interfaces forget the MAC address assigned by u-boot
78          * if the clocks are turned off. Usually, u-boot on kirkwood boards
79          * has no DT support to properly set local-mac-address property.
80          * As a workaround, we get the MAC address from mv643xx_eth registers
81          * and update the port device node if no valid MAC address is set.
82          */
83         for_each_compatible_node(np, NULL, "marvell,kirkwood-eth-port") {
84                 struct device_node *pnp = of_get_parent(np);
85                 struct clk *clk;
86                 struct property *pmac;
87                 void __iomem *io;
88                 u8 *macaddr;
89                 u32 reg;
90
91                 if (!pnp)
92                         continue;
93
94                 /* skip disabled nodes or nodes with valid MAC address*/
95                 if (!of_device_is_available(pnp) ||
96                     !IS_ERR(of_get_mac_address(np)))
97                         goto eth_fixup_skip;
98
99                 clk = of_clk_get(pnp, 0);
100                 if (IS_ERR(clk))
101                         goto eth_fixup_skip;
102
103                 io = of_iomap(pnp, 0);
104                 if (!io)
105                         goto eth_fixup_no_map;
106
107                 /* ensure port clock is not gated to not hang CPU */
108                 clk_prepare_enable(clk);
109
110                 /* store MAC address register contents in local-mac-address */
111                 pmac = kzalloc(sizeof(*pmac) + 6, GFP_KERNEL);
112                 if (!pmac)
113                         goto eth_fixup_no_mem;
114
115                 pmac->value = pmac + 1;
116                 pmac->length = 6;
117                 pmac->name = kstrdup("local-mac-address", GFP_KERNEL);
118                 if (!pmac->name) {
119                         kfree(pmac);
120                         goto eth_fixup_no_mem;
121                 }
122
123                 macaddr = pmac->value;
124                 reg = readl(io + MV643XX_ETH_MAC_ADDR_HIGH);
125                 macaddr[0] = (reg >> 24) & 0xff;
126                 macaddr[1] = (reg >> 16) & 0xff;
127                 macaddr[2] = (reg >> 8) & 0xff;
128                 macaddr[3] = reg & 0xff;
129
130                 reg = readl(io + MV643XX_ETH_MAC_ADDR_LOW);
131                 macaddr[4] = (reg >> 8) & 0xff;
132                 macaddr[5] = reg & 0xff;
133
134                 of_update_property(np, pmac);
135
136 eth_fixup_no_mem:
137                 iounmap(io);
138                 clk_disable_unprepare(clk);
139 eth_fixup_no_map:
140                 clk_put(clk);
141 eth_fixup_skip:
142                 of_node_put(pnp);
143         }
144 }
145
146 /*
147  * Disable propagation of mbus errors to the CPU local bus, as this
148  * causes mbus errors (which can occur for example for PCI aborts) to
149  * throw CPU aborts, which we're not set up to deal with.
150  */
151 static void kirkwood_disable_mbus_error_propagation(void)
152 {
153         void __iomem *cpu_config;
154
155         cpu_config = ioremap(CPU_CONFIG_PHYS, 4);
156         writel(readl(cpu_config) & ~CPU_CONFIG_ERROR_PROP, cpu_config);
157 }
158
159 static struct of_dev_auxdata auxdata[] __initdata = {
160         OF_DEV_AUXDATA("marvell,kirkwood-audio", 0xf10a0000,
161                        "mvebu-audio", NULL),
162         { /* sentinel */ }
163 };
164
165 static void __init kirkwood_dt_init(void)
166 {
167         kirkwood_disable_mbus_error_propagation();
168
169         BUG_ON(mvebu_mbus_dt_init(false));
170
171 #ifdef CONFIG_CACHE_FEROCEON_L2
172         feroceon_of_init();
173 #endif
174         kirkwood_cpufreq_init();
175         kirkwood_cpuidle_init();
176
177         kirkwood_pm_init();
178         kirkwood_dt_eth_fixup();
179
180         of_platform_default_populate(NULL, auxdata, NULL);
181 }
182
183 static const char * const kirkwood_dt_board_compat[] __initconst = {
184         "marvell,kirkwood",
185         NULL
186 };
187
188 DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
189         /* Maintainer: Jason Cooper <jason@lakedaemon.net> */
190         .init_machine   = kirkwood_dt_init,
191         .restart        = mvebu_restart,
192         .dt_compat      = kirkwood_dt_board_compat,
193 MACHINE_END