4 prompt "Texas Instruments' K3 based SoC select"
8 bool "TI's K3 based AM6 SoC Family Support"
11 bool "TI's K3 based J721E SoC Family Support"
18 config SYS_K3_NON_SECURE_MSRAM_SIZE
20 default 0x80000 if SOC_K3_AM6
21 default 0x100000 if SOC_K3_J721E
23 Describes the total size of the MCU MSRAM. This doesn't
24 specify the total size of SPL as ROM can use some part
25 of this RAM. Once ROM gives control to SPL then this
26 complete size can be usable.
28 config SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
30 default 0x58000 if SOC_K3_AM6
31 default 0xc0000 if SOC_K3_J721E
33 Describes the maximum size of the image that ROM can download
36 config SYS_K3_MCU_SCRATCHPAD_BASE
38 default 0x40280000 if SOC_K3_AM6
39 default 0x40280000 if SOC_K3_J721E
41 Describes the base address of MCU Scratchpad RAM.
43 config SYS_K3_MCU_SCRATCHPAD_SIZE
45 default 0x200 if SOC_K3_AM6
46 default 0x200 if SOC_K3_J721E
48 Describes the size of MCU Scratchpad RAM.
50 config SYS_K3_BOOT_PARAM_TABLE_INDEX
52 default 0x41c7fbfc if SOC_K3_AM6
53 default 0x41cffc00 if SOC_K3_J721E
55 Address at which ROM stores the value which determines if SPL
56 is booted up by primary boot media or secondary boot media.
59 string "Key used to generate x509 certificate"
61 This option enables to provide a custom key that can be used for
62 generating x509 certificate for spl binary. If not needed leave
63 it blank so that a random key is generated and used.
65 config SYS_K3_BOOT_CORE_ID
73 config K3_SYSFW_IMAGE_NAME
74 string "File name of SYSFW firmware and configuration blob"
75 depends on K3_LOAD_SYSFW
78 Filename of the combined System Firmware and configuration image tree
79 blob to be loaded when booting from a filesystem.
81 config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_SECT
82 hex "MMC sector to load SYSFW firmware and configuration blob from"
83 depends on K3_LOAD_SYSFW && SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
86 Address on the MMC to load the combined System Firmware and
87 configuration image tree blob from, when the MMC is being used
88 in raw mode. Units: MMC sectors (1 sector = 512 bytes).
90 config K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART
91 hex "MMC partition to load SYSFW firmware and configuration blob from"
92 depends on K3_LOAD_SYSFW && SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
95 Partition on the MMC to the combined System Firmware and configuration
96 image tree blob from, when the MMC is being used in raw mode.
98 config K3_SYSFW_IMAGE_SIZE_MAX
99 int "Amount of memory dynamically allocated for loading SYSFW blob"
100 depends on K3_LOAD_SYSFW
103 Amount of memory (in bytes) reserved through dynamic allocation at
104 runtime for loading the combined System Firmware and configuration image
105 tree blob. Keep it as tight as possible, as this directly affects the
106 overall SPL memory footprint.
108 config SYS_K3_SPL_ATF
109 bool "Start Cortex-A from SPL"
110 depends on SPL && CPU_V7R
112 Enabling this will try to start Cortex-A (typically with ATF)
115 source "board/ti/am65x/Kconfig"