Linux-libre 5.3.12-gnu
[librecmc/linux-libre.git] / arch / arm / mach-ixp4xx / common.c
1 /*
2  * arch/arm/mach-ixp4xx/common.c
3  *
4  * Generic code shared across all IXP4XX platforms
5  *
6  * Maintainer: Deepak Saxena <dsaxena@plexity.net>
7  *
8  * Copyright 2002 (c) Intel Corporation
9  * Copyright 2003-2004 (c) MontaVista, Software, Inc. 
10  * 
11  * This file is licensed under  the terms of the GNU General Public 
12  * License version 2. This program is licensed "as is" without any 
13  * warranty of any kind, whether express or implied.
14  */
15
16 #include <linux/kernel.h>
17 #include <linux/mm.h>
18 #include <linux/init.h>
19 #include <linux/serial.h>
20 #include <linux/tty.h>
21 #include <linux/platform_device.h>
22 #include <linux/serial_core.h>
23 #include <linux/interrupt.h>
24 #include <linux/bitops.h>
25 #include <linux/io.h>
26 #include <linux/export.h>
27 #include <linux/cpu.h>
28 #include <linux/pci.h>
29 #include <linux/sched_clock.h>
30 #include <linux/irqchip/irq-ixp4xx.h>
31 #include <linux/platform_data/timer-ixp4xx.h>
32 #include <mach/udc.h>
33 #include <mach/hardware.h>
34 #include <mach/io.h>
35 #include <linux/uaccess.h>
36 #include <asm/pgtable.h>
37 #include <asm/page.h>
38 #include <asm/exception.h>
39 #include <asm/irq.h>
40 #include <asm/system_misc.h>
41 #include <asm/mach/map.h>
42 #include <asm/mach/irq.h>
43 #include <asm/mach/time.h>
44
45 #include "irqs.h"
46
47 #define IXP4XX_TIMER_FREQ 66666000
48
49 /*************************************************************************
50  * IXP4xx chipset I/O mapping
51  *************************************************************************/
52 static struct map_desc ixp4xx_io_desc[] __initdata = {
53         {       /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
54                 .virtual        = (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT,
55                 .pfn            = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
56                 .length         = IXP4XX_PERIPHERAL_REGION_SIZE,
57                 .type           = MT_DEVICE
58         }, {    /* Expansion Bus Config Registers */
59                 .virtual        = (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT,
60                 .pfn            = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
61                 .length         = IXP4XX_EXP_CFG_REGION_SIZE,
62                 .type           = MT_DEVICE
63         }, {    /* PCI Registers */
64                 .virtual        = (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT,
65                 .pfn            = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
66                 .length         = IXP4XX_PCI_CFG_REGION_SIZE,
67                 .type           = MT_DEVICE
68         },
69 };
70
71 void __init ixp4xx_map_io(void)
72 {
73         iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc));
74 }
75
76 void __init ixp4xx_init_irq(void)
77 {
78         /*
79          * ixp4xx does not implement the XScale PWRMODE register
80          * so it must not call cpu_do_idle().
81          */
82         cpu_idle_poll_ctrl(true);
83
84         ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS,
85                         (cpu_is_ixp46x() || cpu_is_ixp43x()));
86 }
87
88 void __init ixp4xx_timer_init(void)
89 {
90         return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS,
91                                   IRQ_IXP4XX_TIMER1,
92                                   IXP4XX_TIMER_FREQ);
93 }
94
95 static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
96
97 void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
98 {
99         memcpy(&ixp4xx_udc_info, info, sizeof *info);
100 }
101
102 static struct resource ixp4xx_udc_resources[] = {
103         [0] = {
104                 .start  = 0xc800b000,
105                 .end    = 0xc800bfff,
106                 .flags  = IORESOURCE_MEM,
107         },
108         [1] = {
109                 .start  = IRQ_IXP4XX_USB,
110                 .end    = IRQ_IXP4XX_USB,
111                 .flags  = IORESOURCE_IRQ,
112         },
113 };
114
115 static struct resource ixp4xx_gpio_resource[] = {
116         {
117                 .start = IXP4XX_GPIO_BASE_PHYS,
118                 .end = IXP4XX_GPIO_BASE_PHYS + 0xfff,
119                 .flags = IORESOURCE_MEM,
120         },
121 };
122
123 static struct platform_device ixp4xx_gpio_device = {
124         .name           = "ixp4xx-gpio",
125         .id             = -1,
126         .dev = {
127                 .coherent_dma_mask      = DMA_BIT_MASK(32),
128         },
129         .resource = ixp4xx_gpio_resource,
130         .num_resources  = ARRAY_SIZE(ixp4xx_gpio_resource),
131 };
132
133 /*
134  * USB device controller. The IXP4xx uses the same controller as PXA25X,
135  * so we just use the same device.
136  */
137 static struct platform_device ixp4xx_udc_device = {
138         .name           = "pxa25x-udc",
139         .id             = -1,
140         .num_resources  = 2,
141         .resource       = ixp4xx_udc_resources,
142         .dev            = {
143                 .platform_data = &ixp4xx_udc_info,
144         },
145 };
146
147 static struct resource ixp4xx_npe_resources[] = {
148         {
149                 .start = IXP4XX_NPEA_BASE_PHYS,
150                 .end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
151                 .flags = IORESOURCE_MEM,
152         },
153         {
154                 .start = IXP4XX_NPEB_BASE_PHYS,
155                 .end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
156                 .flags = IORESOURCE_MEM,
157         },
158         {
159                 .start = IXP4XX_NPEC_BASE_PHYS,
160                 .end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
161                 .flags = IORESOURCE_MEM,
162         },
163
164 };
165
166 static struct platform_device ixp4xx_npe_device = {
167         .name           = "ixp4xx-npe",
168         .id             = -1,
169         .num_resources  = ARRAY_SIZE(ixp4xx_npe_resources),
170         .resource       = ixp4xx_npe_resources,
171 };
172
173 static struct resource ixp4xx_qmgr_resources[] = {
174         {
175                 .start = IXP4XX_QMGR_BASE_PHYS,
176                 .end = IXP4XX_QMGR_BASE_PHYS + 0x3fff,
177                 .flags = IORESOURCE_MEM,
178         },
179         {
180                 .start = IRQ_IXP4XX_QM1,
181                 .end = IRQ_IXP4XX_QM1,
182                 .flags = IORESOURCE_IRQ,
183         },
184         {
185                 .start = IRQ_IXP4XX_QM2,
186                 .end = IRQ_IXP4XX_QM2,
187                 .flags = IORESOURCE_IRQ,
188         },
189 };
190
191 static struct platform_device ixp4xx_qmgr_device = {
192         .name           = "ixp4xx-qmgr",
193         .id             = -1,
194         .num_resources  = ARRAY_SIZE(ixp4xx_qmgr_resources),
195         .resource       = ixp4xx_qmgr_resources,
196 };
197
198 static struct platform_device *ixp4xx_devices[] __initdata = {
199         &ixp4xx_npe_device,
200         &ixp4xx_qmgr_device,
201         &ixp4xx_gpio_device,
202         &ixp4xx_udc_device,
203 };
204
205 static struct resource ixp46x_i2c_resources[] = {
206         [0] = {
207                 .start  = 0xc8011000,
208                 .end    = 0xc801101c,
209                 .flags  = IORESOURCE_MEM,
210         },
211         [1] = {
212                 .start  = IRQ_IXP4XX_I2C,
213                 .end    = IRQ_IXP4XX_I2C,
214                 .flags  = IORESOURCE_IRQ
215         }
216 };
217
218 /*
219  * I2C controller. The IXP46x uses the same block as the IOP3xx, so
220  * we just use the same device name.
221  */
222 static struct platform_device ixp46x_i2c_controller = {
223         .name           = "IOP3xx-I2C",
224         .id             = 0,
225         .num_resources  = 2,
226         .resource       = ixp46x_i2c_resources
227 };
228
229 static struct platform_device *ixp46x_devices[] __initdata = {
230         &ixp46x_i2c_controller
231 };
232
233 unsigned long ixp4xx_exp_bus_size;
234 EXPORT_SYMBOL(ixp4xx_exp_bus_size);
235
236 void __init ixp4xx_sys_init(void)
237 {
238         ixp4xx_exp_bus_size = SZ_16M;
239
240         platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices));
241
242         if (cpu_is_ixp46x()) {
243                 int region;
244
245                 platform_add_devices(ixp46x_devices,
246                                 ARRAY_SIZE(ixp46x_devices));
247
248                 for (region = 0; region < 7; region++) {
249                         if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) {
250                                 ixp4xx_exp_bus_size = SZ_32M;
251                                 break;
252                         }
253                 }
254         }
255
256         printk("IXP4xx: Using %luMiB expansion bus window size\n",
257                         ixp4xx_exp_bus_size >> 20);
258 }
259
260 unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ;
261 EXPORT_SYMBOL(ixp4xx_timer_freq);
262
263 void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
264 {
265         if (mode == REBOOT_SOFT) {
266                 /* Jump into ROM at address 0 */
267                 soft_restart(0);
268         } else {
269                 /* Use on-chip reset capability */
270
271                 /* set the "key" register to enable access to
272                  * "timer" and "enable" registers
273                  */
274                 *IXP4XX_OSWK = IXP4XX_WDT_KEY;
275
276                 /* write 0 to the timer register for an immediate reset */
277                 *IXP4XX_OSWT = 0;
278
279                 *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE;
280         }
281 }
282
283 #ifdef CONFIG_PCI
284 static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
285 {
286         return (dma_addr + size) > SZ_64M;
287 }
288
289 static int ixp4xx_platform_notify_remove(struct device *dev)
290 {
291         if (dev_is_pci(dev))
292                 dmabounce_unregister_dev(dev);
293
294         return 0;
295 }
296 #endif
297
298 /*
299  * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things.
300  */
301 static int ixp4xx_platform_notify(struct device *dev)
302 {
303         dev->dma_mask = &dev->coherent_dma_mask;
304
305 #ifdef CONFIG_PCI
306         if (dev_is_pci(dev)) {
307                 dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */
308                 dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
309                 return 0;
310         }
311 #endif
312
313         dev->coherent_dma_mask = DMA_BIT_MASK(32);
314         return 0;
315 }
316
317 int dma_set_coherent_mask(struct device *dev, u64 mask)
318 {
319         if (dev_is_pci(dev))
320                 mask &= DMA_BIT_MASK(28); /* 64 MB */
321
322         if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) {
323                 dev->coherent_dma_mask = mask;
324                 return 0;
325         }
326
327         return -EIO;            /* device wanted sub-64MB mask */
328 }
329 EXPORT_SYMBOL(dma_set_coherent_mask);
330
331 #ifdef CONFIG_IXP4XX_INDIRECT_PCI
332 /*
333  * In the case of using indirect PCI, we simply return the actual PCI
334  * address and our read/write implementation use that to drive the
335  * access registers. If something outside of PCI is ioremap'd, we
336  * fallback to the default.
337  */
338
339 static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size,
340                                            unsigned int mtype, void *caller)
341 {
342         if (!is_pci_memory(addr))
343                 return __arm_ioremap_caller(addr, size, mtype, caller);
344
345         return (void __iomem *)addr;
346 }
347
348 static void ixp4xx_iounmap(volatile void __iomem *addr)
349 {
350         if (!is_pci_memory((__force u32)addr))
351                 __iounmap(addr);
352 }
353 #endif
354
355 void __init ixp4xx_init_early(void)
356 {
357         platform_notify = ixp4xx_platform_notify;
358 #ifdef CONFIG_PCI
359         platform_notify_remove = ixp4xx_platform_notify_remove;
360 #endif
361 #ifdef CONFIG_IXP4XX_INDIRECT_PCI
362         arch_ioremap_caller = ixp4xx_ioremap_caller;
363         arch_iounmap = ixp4xx_iounmap;
364 #endif
365 }