1 // SPDX-License-Identifier: GPL-2.0+
5 * Peng Fan <peng.fan@nxp.com>
9 #include <asm/arch/imx-regs.h>
11 #include <asm/arch/clock.h>
12 #include <asm/arch/sys_proto.h>
13 #include <asm/mach-imx/hab.h>
14 #include <asm/mach-imx/boot_mode.h>
15 #include <asm/mach-imx/syscounter.h>
16 #include <asm/armv8/mmu.h>
18 #include <fdt_support.h>
22 DECLARE_GLOBAL_DATA_PTR;
24 #if defined(CONFIG_SECURE_BOOT)
25 struct imx_sec_config_fuse_t const imx_sec_config_fuse = {
33 #ifdef CONFIG_SPL_BUILD
34 struct sctr_regs *sctr = (struct sctr_regs *)SYSCNT_CTRL_BASE_ADDR;
35 unsigned long freq = readl(&sctr->cntfid0);
37 /* Update with accurate clock frequency */
38 asm volatile("msr cntfrq_el0, %0" : : "r" (freq) : "memory");
40 clrsetbits_le32(&sctr->cntcr, SC_CNTCR_FREQ0 | SC_CNTCR_FREQ1,
41 SC_CNTCR_FREQ0 | SC_CNTCR_ENABLE | SC_CNTCR_HDBG);
50 void enable_tzc380(void)
52 struct iomuxc_gpr_base_regs *gpr =
53 (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
55 /* Enable TZASC and lock setting */
56 setbits_le32(&gpr->gpr[10], GPR_TZASC_EN);
57 setbits_le32(&gpr->gpr[10], GPR_TZASC_EN_LOCK);
60 void set_wdog_reset(struct wdog_regs *wdog)
63 * Output WDOG_B signal to reset external pmic or POR_B decided by
64 * the board design. Without external reset, the peripherals/DDR/
65 * PMIC are not reset, that may cause system working abnormal.
66 * WDZST bit is write-once only bit. Align this bit in kernel,
67 * otherwise kernel code will have no chance to set this bit.
69 setbits_le16(&wdog->wcr, WDOG_WDT_MASK | WDOG_WDZST_MASK);
72 static struct mm_region imx8m_mem_map[] = {
78 .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
85 .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
87 PTE_BLOCK_PXN | PTE_BLOCK_UXN
93 .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
95 PTE_BLOCK_PXN | PTE_BLOCK_UXN
101 .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
102 PTE_BLOCK_OUTER_SHARE
107 .size = 0x3f500000UL,
108 .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
109 PTE_BLOCK_NON_SHARE |
110 PTE_BLOCK_PXN | PTE_BLOCK_UXN
113 .virt = 0x40000000UL,
114 .phys = 0x40000000UL,
115 .size = 0xC0000000UL,
116 .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
117 PTE_BLOCK_OUTER_SHARE
120 .virt = 0x100000000UL,
121 .phys = 0x100000000UL,
122 .size = 0x040000000UL,
123 .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
124 PTE_BLOCK_OUTER_SHARE
126 /* List terminator */
131 struct mm_region *mem_map = imx8m_mem_map;
133 u32 get_cpu_rev(void)
135 struct anamix_pll *ana_pll = (struct anamix_pll *)ANATOP_BASE_ADDR;
136 u32 reg = readl(&ana_pll->digprog);
137 u32 type = (reg >> 16) & 0xff;
142 if (reg == CHIP_REV_1_0) {
144 * For B0 chip, the DIGPROG is not updated, still TO1.0.
145 * we have to check ROM version further
147 rom_version = readl((void __iomem *)ROM_VERSION_A0);
148 if (rom_version != CHIP_REV_1_0) {
149 rom_version = readl((void __iomem *)ROM_VERSION_B0);
150 if (rom_version >= CHIP_REV_2_0)
155 return (type << 12) | reg;
158 static void imx_set_wdog_powerdown(bool enable)
160 struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
161 struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
162 struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR;
164 /* Write to the PDE (Power Down Enable) bit */
165 writew(enable, &wdog1->wmcr);
166 writew(enable, &wdog2->wmcr);
167 writew(enable, &wdog3->wmcr);
170 int arch_cpu_init(void)
173 * Init timer at very early state, because sscg pll setting
178 if (IS_ENABLED(CONFIG_SPL_BUILD)) {
180 imx_set_wdog_powerdown(false);
186 bool is_usb_boot(void)
188 return get_boot_device() == USB_BOOT;
191 #ifdef CONFIG_OF_SYSTEM_SETUP
192 int ft_system_setup(void *blob, bd_t *bd)
198 /* Disable the CPU idle for A0 chip since the HW does not support it */
199 if (is_soc_rev(CHIP_REV_1_0)) {
200 static const char * const nodes_path[] = {
207 for (i = 0; i < ARRAY_SIZE(nodes_path); i++) {
208 nodeoff = fdt_path_offset(blob, nodes_path[i]);
210 continue; /* Not found, skip it */
212 printf("Found %s node\n", nodes_path[i]);
214 rc = fdt_delprop(blob, nodeoff, "cpu-idle-states");
216 printf("Unable to update property %s:%s, err=%s\n",
217 nodes_path[i], "status", fdt_strerror(rc));
221 printf("Remove %s:%s\n", nodes_path[i],
230 void reset_cpu(ulong addr)
232 struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR;
234 /* Clear WDA to trigger WDOG_B immediately */
235 writew((WCR_WDE | WCR_SRS), &wdog->wcr);
239 * spin for .5 seconds before reset