7 config ROM_UNIFIED_SECTIONS
10 config SYSCOUNTER_TIMER
17 bool "i.MX Resource domain controller driver"
18 depends on ARCH_MX6 || ARCH_MX7
20 i.MX Resource domain controller is used to assign masters
21 and peripherals to differet domains. This can be used to
25 bool "Support boot auxiliary core"
26 depends on ARCH_MX7 || ARCH_MX6
28 bootaux [addr] to boot auxiliary core.
30 config USE_IMXIMG_PLUGIN
31 bool "Use imximage plugin code"
32 depends on ARCH_MX7 || ARCH_MX6
34 i.MX6/7 supports DCD and Plugin. Enable this configuration
35 to use Plugin, otherwise DCD will be used.
38 bool "Support i.MX HAB features"
39 depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX5
40 select FSL_CAAM if HAS_CAAM
43 This option enables the support for secure boot (HAB).
44 See doc/README.mxc_hab for more details.
47 bool "Support the 'bmode' command"
49 depends on ARCH_MX6 || ARCH_MX5
51 This enables the 'bmode' (bootmode) command for forcing
52 a boot from specific media.
54 This is useful for forcing the ROM's usb downloader to
55 activate upon a watchdog reset which is nice when iterating
56 on U-Boot. Using the reset button or running bmode normal
57 will set it back to normal. This command currently
58 supports i.MX53 and i.MX6.
61 bool "Support the 'dek_blob' command"
63 This enables the 'dek_blob' command which is used with the
64 Freescale secure boot mechanism. This command encapsulates and
65 creates a blob of data. See also CMD_BLOB and doc/README.mxc_hab for
69 bool "Support the 'hdmidet' command"
71 This enables the 'hdmidet' command which detects if an HDMI monitor
74 config NXP_BOARD_REVISION
75 bool "Read NXP board revision from fuses"
76 depends on ARCH_MX6 || ARCH_MX7
78 NXP boards based on i.MX6/7 contain the board revision information
79 stored in the fuses. Select this option if you want to be able to
80 retrieve the board revision information.
82 config DDRMC_VF610_CALIBRATION
83 bool "Enable DDRMC (DDR3) on-chip calibration"
86 Vybrid (vf610) SoC provides some on-chip facility to tune the DDR3
87 memory parameters. Select this option if you want to calculate them
90 NXP does NOT recommend to perform this calibration at each boot. One
91 shall perform it on a new PCB and then use those values to program
92 the ddrmc_cr_setting on relevant board file.