7 config ROM_UNIFIED_SECTIONS
10 config SYSCOUNTER_TIMER
17 bool "i.MX Resource domain controller driver"
18 depends on ARCH_MX6 || ARCH_MX7
20 i.MX Resource domain controller is used to assign masters
21 and peripherals to differet domains. This can be used to
25 bool "Support boot auxiliary core"
26 depends on ARCH_MX7 || ARCH_MX6 || ARCH_VF610
28 bootaux [addr] to boot auxiliary core.
30 config IMX_MODULE_FUSE
31 bool "i.MX Module Fuse"
34 i.MX module fuse to runtime disable some driver, including
37 config USE_IMXIMG_PLUGIN
38 bool "Use imximage plugin code"
39 depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX7ULP
41 i.MX6/7 supports DCD and Plugin. Enable this configuration
42 to use Plugin, otherwise DCD will be used.
45 bool "Support i.MX HAB features"
46 depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX5
47 select FSL_CAAM if HAS_CAAM
50 This option enables the support for secure boot (HAB).
51 See doc/imx/habv4/* for more details.
54 hex "Maximum size for Command Sequence File (CSF) binary"
57 Define the maximum size for Command Sequence File (CSF) binary
58 this information is used to define the image boot data.
61 bool "Support the 'bmode' command"
63 depends on ARCH_MX6 || ARCH_MX5
65 This enables the 'bmode' (bootmode) command for forcing
66 a boot from specific media.
68 This is useful for forcing the ROM's usb downloader to
69 activate upon a watchdog reset which is nice when iterating
70 on U-Boot. Using the reset button or running bmode normal
71 will set it back to normal. This command currently
72 supports i.MX53 and i.MX6.
75 bool "Support the 'dek_blob' command"
77 This enables the 'dek_blob' command which is used with the
78 Freescale secure boot mechanism. This command encapsulates and
79 creates a blob of data. See also CMD_BLOB and doc/imx/habv4/* for
83 bool "Support the 'hdmidet' command"
85 This enables the 'hdmidet' command which detects if an HDMI monitor
89 bool "i.MX6 NAND Boot Control Block(BCB) command"
90 depends on MTD_RAW_NAND && CMD_MTDPARTS
91 select BCH if MX6UL || MX6ULL
92 default y if (ARCH_MX6 && NAND_MXS) || (ARCH_MX7 && NAND_MXS)
94 Unlike normal 'nand write/erase' commands, this command update
95 Boot Control Block(BCB) for i.MX6 platform NAND IP's.
97 This is similar to kobs-ng, which is used in Linux as separate
100 config NXP_BOARD_REVISION
101 bool "Read NXP board revision from fuses"
102 depends on ARCH_MX6 || ARCH_MX7
104 NXP boards based on i.MX6/7 contain the board revision information
105 stored in the fuses. Select this option if you want to be able to
106 retrieve the board revision information.
108 config DDRMC_VF610_CALIBRATION
109 bool "Enable DDRMC (DDR3) on-chip calibration"
110 depends on ARCH_VF610
112 Vybrid (vf610) SoC provides some on-chip facility to tune the DDR3
113 memory parameters. Select this option if you want to calculate them
116 NXP does NOT recommend to perform this calibration at each boot. One
117 shall perform it on a new PCB and then use those values to program
118 the ddrmc_cr_setting on relevant board file.
120 config SPL_IMX_ROMAPI_LOADADDR
121 hex "Default load address to load image through ROM API"
122 depends on IMX8MN || IMX8MP
125 hex "DCD Blocks location on the image"
126 default 0x00910000 if !ARCH_MX7ULP
127 default 0x2f010000 if ARCH_MX7ULP
129 Indicates where the Device Configuration Data, a binary table used by
130 the ROM code to configure the device at early boot stage, is located.
131 This information is shared with the user via mkimage -l just so the