3 * Texas Instruments, <www.ti.com>
5 * SPDX-License-Identifier: GPL-2.0+
11 #include <asm/arch/omap.h>
12 #include <asm/arch/clock.h>
14 #include <asm/omap_common.h>
15 #include <linux/mtd/omap_gpmc.h>
16 #include <asm/arch/mux_omap4.h>
18 DECLARE_GLOBAL_DATA_PTR;
20 extern const struct emif_regs emif_regs_elpida_200_mhz_2cs;
21 extern const struct emif_regs emif_regs_elpida_380_mhz_1cs;
22 extern const struct emif_regs emif_regs_elpida_400_mhz_1cs;
23 extern const struct emif_regs emif_regs_elpida_400_mhz_2cs;
27 extern const struct omap_sysinfo sysinfo;
30 void watchdog_init(void);
31 u32 get_device_type(void);
32 void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
33 void set_muxconf_regs_essential(void);
34 u32 wait_on_value(u32, u32, void *, u32);
35 void sdelay(unsigned long);
36 void set_pl310_ctrl_reg(u32 val);
37 void setup_clocks_for_console(void);
39 void bypass_dpll(u32 const base);
40 void freq_update_core(void);
41 u32 get_sys_clk_freq(void);
42 u32 omap4_ddr_clk(void);
43 void cancel_out(u32 *num, u32 *den, u32 den_limit);
44 void sdram_init(void);
45 u32 omap_sdram_size(void);
47 void save_omap_boot_params(void);
48 void init_omap_revision(void);
49 void do_io_settings(void);
50 void sri2c_init(void);
51 void gpi2c_init(void);
52 int omap_vc_bypass_send_value(u8 sa, u8 reg_addr, u8 reg_data);
54 void force_emif_self_refresh(void);
55 void setup_warmreset_time(void);
57 static inline u32 running_from_sdram(void)
60 asm volatile ("mov %0, pc" : "=r" (pc));
61 return ((pc >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
62 (pc < OMAP44XX_DRAM_ADDR_SPACE_END));
65 static inline u8 uboot_loaded_by_spl(void)
68 * u-boot can be running from sdram either because of configuration
69 * Header or by SPL. If because of CH, then the romcode sets the
70 * CHSETTINGS executed bit to true in the boot parameter structure that
71 * it passes to the bootloader.This parameter is stored in the ch_flags
72 * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
73 * mandatory section if CH is present.
75 if ((gd->arch.omap_boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
78 return running_from_sdram();
81 * The basic hardware init of OMAP(s_init()) can happen in 4
83 * 1. SPL running from SRAM
84 * 2. U-Boot running from FLASH
85 * 3. Non-XIP U-Boot loaded to SDRAM by SPL
86 * 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
87 * Configuration Header feature
89 * This function finds this context.
90 * Defining as inline may help in compiling out unused functions in SPL
92 static inline u32 omap_hw_init_context(void)
94 #ifdef CONFIG_SPL_BUILD
95 return OMAP_INIT_CONTEXT_SPL;
97 if (uboot_loaded_by_spl())
98 return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
99 else if (running_from_sdram())
100 return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
102 return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;