imx: reorganize IMX code as other SOCs
[oweals/u-boot.git] / arch / arm / include / asm / arch-mx7ulp / iomux.h
1 /*
2  * Based on Linux i.MX iomux-v3.h file:
3  * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
4  *                      <armlinux@phytec.de>
5  *
6  * Copyright (C) 2016 Freescale Semiconductor, Inc.
7  *
8  * SPDX-License-Identifier:     GPL-2.0+
9  */
10
11 #ifndef __MACH_IOMUX_H__
12 #define __MACH_IOMUX_H__
13
14 /*
15  *      build IOMUX_PAD structure
16  *
17  * This iomux scheme is based around pads, which are the physical balls
18  * on the processor.
19  *
20  * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
21  *   things like driving strength and pullup/pulldown.
22  * - Each pad can have but not necessarily does have an output routing register
23  *   (IOMUXC_SW_MUX_CTL_PAD_x).
24  * - Each pad can have but not necessarily does have an input routing register
25  *   (IOMUXC_x_SELECT_INPUT)
26  *
27  * The three register sets do not have a fixed offset to each other,
28  * hence we order this table by pad control registers (which all pads
29  * have) and put the optional i/o routing registers into additional
30  * fields.
31  *
32  * The naming convention for the pad modes is SOC_PAD_<padname>__<padmode>
33  * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
34  *
35  * IOMUX/PAD Bit field definitions
36  *
37  * MUX_CTRL_OFS:                        0..15 (16)
38  * SEL_INPUT_OFS:                      16..31 (16)
39  * MUX_MODE:                       32..37  (6)
40  * SEL_INP:                                38..41  (4)
41  * PAD_CTRL + NO_PAD_CTRL:         42..60 (19)
42  * reserved:                           61-63      (3)
43 */
44
45 typedef u64 iomux_cfg_t;
46
47 #define MUX_CTRL_OFS_SHIFT           0
48 #define MUX_CTRL_OFS_MASK       ((iomux_cfg_t)0xffff << MUX_CTRL_OFS_SHIFT)
49 #define MUX_SEL_INPUT_OFS_SHIFT 16
50 #define MUX_SEL_INPUT_OFS_MASK  ((iomux_cfg_t)0xffff << \
51         MUX_SEL_INPUT_OFS_SHIFT)
52
53 #define MUX_MODE_SHIFT          32
54 #define MUX_MODE_MASK           ((iomux_cfg_t)0x3f << MUX_MODE_SHIFT)
55 #define MUX_SEL_INPUT_SHIFT     38
56 #define MUX_SEL_INPUT_MASK      ((iomux_cfg_t)0xf << MUX_SEL_INPUT_SHIFT)
57 #define MUX_PAD_CTRL_SHIFT      42
58 #define MUX_PAD_CTRL_MASK       ((iomux_cfg_t)0x7ffff << MUX_PAD_CTRL_SHIFT)
59
60 #define MUX_PAD_CTRL(x)         ((iomux_cfg_t)(x) << MUX_PAD_CTRL_SHIFT)
61
62 #define IOMUX_PAD(pad_ctrl_ofs, mux_ctrl_ofs, mux_mode, sel_input_ofs,  \
63                 sel_input, pad_ctrl)                                    \
64         (((iomux_cfg_t)(mux_ctrl_ofs) << MUX_CTRL_OFS_SHIFT)     |      \
65         ((iomux_cfg_t)(mux_mode)      << MUX_MODE_SHIFT)         |      \
66         ((iomux_cfg_t)(pad_ctrl)      << MUX_PAD_CTRL_SHIFT)     |      \
67         ((iomux_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)|      \
68         ((iomux_cfg_t)(sel_input)     << MUX_SEL_INPUT_SHIFT))
69
70 #define NEW_PAD_CTRL(cfg, pad)  (((cfg) & ~MUX_PAD_CTRL_MASK) | \
71                                         MUX_PAD_CTRL(pad))
72
73
74 #define IOMUX_CONFIG_MPORTS       0x20
75 #define MUX_MODE_MPORTS           ((iomux_v3_cfg_t)IOMUX_CONFIG_MPORTS << \
76                                 MUX_MODE_SHIFT)
77
78 /* Bit definition below needs to be fixed acccording to ulp rm */
79
80 #define NO_PAD_CTRL                  (1 << 18)
81 #define PAD_CTL_OBE_ENABLE       (1 << 17)
82 #define PAD_CTL_IBE_ENABLE       (1 << 16)
83 #define PAD_CTL_DSE          (1 << 6)
84 #define PAD_CTL_ODE          (1 << 5)
85 #define PAD_CTL_SRE_FAST     (0 << 2)
86 #define PAD_CTL_SRE_SLOW     (1 << 2)
87 #define PAD_CTL_PUE          (1 << 1)
88 #define PAD_CTL_PUS_UP       ((1 << 0) | PAD_CTL_PUE)
89 #define PAD_CTL_PUS_DOWN     ((0 << 0) | PAD_CTL_PUE)
90
91
92 void mx7ulp_iomux_setup_pad(iomux_cfg_t pad);
93 void mx7ulp_iomux_setup_multiple_pads(iomux_cfg_t const *pad_list,
94                                       unsigned count);
95 #endif  /* __MACH_IOMUX_H__*/