1 // SPDX-License-Identifier: GPL-2.0+
3 * dts file for Xilinx ZynqMP zc1751-xm017-dc3
5 * (C) Copyright 2016 - 2018, Xilinx, Inc.
7 * Michal Simek <michal.simek@xilinx.com>
12 #include "zynqmp.dtsi"
13 #include "zynqmp-clk-ccf.dtsi"
16 model = "ZynqMP zc1751-xm017-dc3 RevA";
17 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
33 bootargs = "earlycon";
34 stdout-path = "serial0:115200n8";
38 device_type = "memory";
39 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
78 phy-mode = "rgmii-id";
79 phy0: ethernet-phy@0 { /* VSC8211 */
88 /* just eeprom here */
91 clock-frequency = <400000>;
93 tca6416_u26: gpio@20 {
94 compatible = "ti,tca6416";
98 /* IRQ not connected */
102 compatible = "dallas,ds1339";
107 /* eeprom24c02 and SE98A temp chip pca9306 */
110 clock-frequency = <400000>;
113 /* MT29F64G08AECDBJ4-6 */
119 partition@0 { /* for testing purpose */
120 label = "nand-fsbl-uboot";
121 reg = <0x0 0x0 0x400000>;
123 partition@1 { /* for testing purpose */
124 label = "nand-linux";
125 reg = <0x0 0x400000 0x1400000>;
127 partition@2 { /* for testing purpose */
128 label = "nand-device-tree";
129 reg = <0x0 0x1800000 0x400000>;
131 partition@3 { /* for testing purpose */
132 label = "nand-rootfs";
133 reg = <0x0 0x1C00000 0x1400000>;
135 partition@4 { /* for testing purpose */
136 label = "nand-bitstream";
137 reg = <0x0 0x3000000 0x400000>;
139 partition@5 { /* for testing purpose */
141 reg = <0x0 0x3400000 0xFCC00000>;
144 partition@6 { /* for testing purpose */
145 label = "nand1-fsbl-uboot";
146 reg = <0x1 0x0 0x400000>;
148 partition@7 { /* for testing purpose */
149 label = "nand1-linux";
150 reg = <0x1 0x400000 0x1400000>;
152 partition@8 { /* for testing purpose */
153 label = "nand1-device-tree";
154 reg = <0x1 0x1800000 0x400000>;
156 partition@9 { /* for testing purpose */
157 label = "nand1-rootfs";
158 reg = <0x1 0x1C00000 0x1400000>;
160 partition@10 { /* for testing purpose */
161 label = "nand1-bitstream";
162 reg = <0x1 0x3000000 0x400000>;
164 partition@11 { /* for testing purpose */
165 label = "nand1-misc";
166 reg = <0x1 0x3400000 0xFCC00000>;
176 /* SATA phy OOB timing settings */
177 ceva,p0-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
178 ceva,p0-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
179 ceva,p0-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
180 ceva,p0-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
181 ceva,p1-cominit-params = /bits/ 8 <0x1B 0x4D 0x18 0x28>;
182 ceva,p1-comwake-params = /bits/ 8 <0x06 0x19 0x08 0x0E>;
183 ceva,p1-burst-params = /bits/ 8 <0x13 0x08 0x4A 0x06>;
184 ceva,p1-retry-params = /bits/ 16 <0x96A4 0x3FFC>;
187 &sdhci1 { /* emmc with some settings */
206 /* ULPI SMSC USB3320 */