1 // SPDX-License-Identifier: GPL-2.0+
3 * dts file for Xilinx ZynqMP zc1751-xm016-dc2
5 * (C) Copyright 2015 - 2018, Xilinx, Inc.
7 * Michal Simek <michal.simek@xilinx.com>
12 #include "zynqmp.dtsi"
13 #include "zynqmp-clk-ccf.dtsi"
16 model = "ZynqMP zc1751-xm016-dc2 RevA";
17 compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
34 bootargs = "earlycon";
35 stdout-path = "serial0:115200n8";
39 device_type = "memory";
40 reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
87 phy-mode = "rgmii-id";
88 phy0: ethernet-phy@5 {
90 ti,rx-internal-delay = <0x8>;
91 ti,tx-internal-delay = <0xa>;
92 ti,fifo-depth = <0x1>;
93 ti,dp83867-rxctrl-strap-quirk;
103 clock-frequency = <400000>;
105 tca6416_u26: gpio@20 {
106 compatible = "ti,tca6416";
110 /* IRQ not connected */
114 compatible = "dallas,ds1339";
125 #address-cells = <0x2>;
128 partition@0 { /* for testing purpose */
129 label = "nand-fsbl-uboot";
130 reg = <0x0 0x0 0x400000>;
132 partition@1 { /* for testing purpose */
133 label = "nand-linux";
134 reg = <0x0 0x400000 0x1400000>;
136 partition@2 { /* for testing purpose */
137 label = "nand-device-tree";
138 reg = <0x0 0x1800000 0x400000>;
140 partition@3 { /* for testing purpose */
141 label = "nand-rootfs";
142 reg = <0x0 0x1c00000 0x1400000>;
144 partition@4 { /* for testing purpose */
145 label = "nand-bitstream";
146 reg = <0x0 0x3000000 0x400000>;
148 partition@5 { /* for testing purpose */
150 reg = <0x0 0x3400000 0xfcc00000>;
155 #address-cells = <0x2>;
158 partition@0 { /* for testing purpose */
159 label = "nand1-fsbl-uboot";
160 reg = <0x0 0x0 0x400000>;
162 partition@1 { /* for testing purpose */
163 label = "nand1-linux";
164 reg = <0x0 0x400000 0x1400000>;
166 partition@2 { /* for testing purpose */
167 label = "nand1-device-tree";
168 reg = <0x0 0x1800000 0x400000>;
170 partition@3 { /* for testing purpose */
171 label = "nand1-rootfs";
172 reg = <0x0 0x1c00000 0x1400000>;
174 partition@4 { /* for testing purpose */
175 label = "nand1-bitstream";
176 reg = <0x0 0x3000000 0x400000>;
178 partition@5 { /* for testing purpose */
179 label = "nand1-misc";
180 reg = <0x0 0x3400000 0xfcc00000>;
192 spi0_flash0: flash@0 {
193 #address-cells = <1>;
195 compatible = "sst,sst25wf080", "jedec,spi-nor";
196 spi-max-frequency = <50000000>;
201 reg = <0x0 0x100000>;
209 spi1_flash0: flash@0 {
210 #address-cells = <1>;
212 compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash";
213 spi-max-frequency = <20000000>;
223 /* ULPI SMSC USB3320 */