arch/arm/dts/zynq-7000.dtsi

   1 /*
   2  * Xilinx Zynq 7000 DTSI
   3  * Describes the hardware common to all Zynq 7000-based boards.
   4  *
   5  * Copyright (C) 2013 Xilinx, Inc.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9 /include/ "skeleton.dtsi"
  10
  11 / {
  12         compatible = "xlnx,zynq-7000";
  13
  14         cpus {
  15                 #address-cells = <1>;
  16                 #size-cells = <0>;
  17
  18                 cpu@0 {
  19                         compatible = "arm,cortex-a9";
  20                         device_type = "cpu";
  21                         reg = <0>;
  22                         clocks = <&clkc 3>;
  23                         clock-latency = <1000>;
  24                         cpu0-supply = <&regulator_vccpint>;
  25                         operating-points = <
  26                                 /* kHz    uV */
  27                                 666667  1000000
  28                                 333334  1000000
  29                         >;
  30                 };
  31
  32                 cpu@1 {
  33                         compatible = "arm,cortex-a9";
  34                         device_type = "cpu";
  35                         reg = <1>;
  36                         clocks = <&clkc 3>;
  37                 };
  38         };
  39
  40         pmu {
  41                 compatible = "arm,cortex-a9-pmu";
  42                 interrupts = <0 5 4>, <0 6 4>;
  43                 interrupt-parent = <&intc>;
  44                 reg = < 0xf8891000 0x1000 0xf8893000 0x1000 >;
  45         };
  46
  47         regulator_vccpint: fixedregulator@0 {
  48                 compatible = "regulator-fixed";
  49                 regulator-name = "VCCPINT";
  50                 regulator-min-microvolt = <1000000>;
  51                 regulator-max-microvolt = <1000000>;
  52                 regulator-boot-on;
  53                 regulator-always-on;
  54         };
  55
  56         amba {
  57                 compatible = "simple-bus";
  58                 #address-cells = <1>;
  59                 #size-cells = <1>;
  60                 interrupt-parent = <&intc>;
  61                 ranges;
  62
  63                 adc: adc@f8007100 {
  64                         compatible = "xlnx,zynq-xadc-1.00.a";
  65                         reg = <0xf8007100 0x20>;
  66                         interrupts = <0 7 4>;
  67                         interrupt-parent = <&intc>;
  68                         clocks = <&clkc 12>;
  69                 };
  70
  71                 can0: can@e0008000 {
  72                         compatible = "xlnx,zynq-can-1.0";
  73                         status = "disabled";
  74                         clocks = <&clkc 19>, <&clkc 36>;
  75                         clock-names = "can_clk", "pclk";
  76                         reg = <0xe0008000 0x1000>;
  77                         interrupts = <0 28 4>;
  78                         interrupt-parent = <&intc>;
  79                         tx-fifo-depth = <0x40>;
  80                         rx-fifo-depth = <0x40>;
  81                 };
  82
  83                 can1: can@e0009000 {
  84                         compatible = "xlnx,zynq-can-1.0";
  85                         status = "disabled";
  86                         clocks = <&clkc 20>, <&clkc 37>;
  87                         clock-names = "can_clk", "pclk";
  88                         reg = <0xe0009000 0x1000>;
  89                         interrupts = <0 51 4>;
  90                         interrupt-parent = <&intc>;
  91                         tx-fifo-depth = <0x40>;
  92                         rx-fifo-depth = <0x40>;
  93                 };
  94
  95                 gpio0: gpio@e000a000 {
  96                         compatible = "xlnx,zynq-gpio-1.0";
  97                         #gpio-cells = <2>;
  98                         clocks = <&clkc 42>;
  99                         gpio-controller;
 100                         interrupt-parent = <&intc>;
 101                         interrupts = <0 20 4>;
 102                         reg = <0xe000a000 0x1000>;
 103                 };
 104
 105                 i2c0: i2c@e0004000 {
 106                         compatible = "cdns,i2c-r1p10";
 107                         status = "disabled";
 108                         clocks = <&clkc 38>;
 109                         interrupt-parent = <&intc>;
 110                         interrupts = <0 25 4>;
 111                         reg = <0xe0004000 0x1000>;
 112                         #address-cells = <1>;
 113                         #size-cells = <0>;
 114                 };
 115
 116                 i2c1: i2c@e0005000 {
 117                         compatible = "cdns,i2c-r1p10";
 118                         status = "disabled";
 119                         clocks = <&clkc 39>;
 120                         interrupt-parent = <&intc>;
 121                         interrupts = <0 48 4>;
 122                         reg = <0xe0005000 0x1000>;
 123                         #address-cells = <1>;
 124                         #size-cells = <0>;
 125                 };
 126
 127                 intc: interrupt-controller@f8f01000 {
 128                         compatible = "arm,cortex-a9-gic";
 129                         #interrupt-cells = <3>;
 130                         #address-cells = <1>;
 131                         interrupt-controller;
 132                         reg = <0xF8F01000 0x1000>,
 133                               <0xF8F00100 0x100>;
 134                 };
 135
 136                 L2: cache-controller@f8f02000 {
 137                         compatible = "arm,pl310-cache";
 138                         reg = <0xF8F02000 0x1000>;
 139                         arm,data-latency = <3 2 2>;
 140                         arm,tag-latency = <2 2 2>;
 141                         cache-unified;
 142                         cache-level = <2>;
 143                 };
 144
 145                 mc: memory-controller@f8006000 {
 146                         compatible = "xlnx,zynq-ddrc-a05";
 147                         reg = <0xf8006000 0x1000>;
 148                 };
 149
 150                 uart0: serial@e0000000 {
 151                         compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 152                         status = "disabled";
 153                         clocks = <&clkc 23>, <&clkc 40>;
 154                         clock-names = "uart_clk", "pclk";
 155                         reg = <0xE0000000 0x1000>;
 156                         interrupts = <0 27 4>;
 157                 };
 158
 159                 uart1: serial@e0001000 {
 160                         compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 161                         status = "disabled";
 162                         clocks = <&clkc 24>, <&clkc 41>;
 163                         clock-names = "uart_clk", "pclk";
 164                         reg = <0xE0001000 0x1000>;
 165                         interrupts = <0 50 4>;
 166                 };
 167
 168                 spi0: spi@e0006000 {
 169                         compatible = "xlnx,zynq-spi-r1p6";
 170                         reg = <0xe0006000 0x1000>;
 171                         status = "disabled";
 172                         interrupt-parent = <&intc>;
 173                         interrupts = <0 26 4>;
 174                         clocks = <&clkc 25>, <&clkc 34>;
 175                         clock-names = "ref_clk", "pclk";
 176                         spi-max-frequency = <166666700>;
 177                         #address-cells = <1>;
 178                         #size-cells = <0>;
 179                 };
 180
 181                 spi1: spi@e0007000 {
 182                         compatible = "xlnx,zynq-spi-r1p6";
 183                         reg = <0xe0007000 0x1000>;
 184                         status = "disabled";
 185                         interrupt-parent = <&intc>;
 186                         interrupts = <0 49 4>;
 187                         clocks = <&clkc 26>, <&clkc 35>;
 188                         clock-names = "ref_clk", "pclk";
 189                         spi-max-frequency = <166666700>;
 190                         #address-cells = <1>;
 191                         #size-cells = <0>;
 192                 };
 193
 194                 gem0: ethernet@e000b000 {
 195                         compatible = "cdns,gem";
 196                         reg = <0xe000b000 0x1000>;
 197                         status = "disabled";
 198                         interrupts = <0 22 4>;
 199                         clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
 200                         clock-names = "pclk", "hclk", "tx_clk";
 201                 };
 202
 203                 gem1: ethernet@e000c000 {
 204                         compatible = "cdns,gem";
 205                         reg = <0xe000c000 0x1000>;
 206                         status = "disabled";
 207                         interrupts = <0 45 4>;
 208                         clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
 209                         clock-names = "pclk", "hclk", "tx_clk";
 210                 };
 211
 212                 sdhci0: sdhci@e0100000 {
 213                         compatible = "arasan,sdhci-8.9a";
 214                         status = "disabled";
 215                         clock-names = "clk_xin", "clk_ahb";
 216                         clocks = <&clkc 21>, <&clkc 32>;
 217                         interrupt-parent = <&intc>;
 218                         interrupts = <0 24 4>;
 219                         reg = <0xe0100000 0x1000>;
 220                 } ;
 221
 222                 sdhci1: sdhci@e0101000 {
 223                         compatible = "arasan,sdhci-8.9a";
 224                         status = "disabled";
 225                         clock-names = "clk_xin", "clk_ahb";
 226                         clocks = <&clkc 22>, <&clkc 33>;
 227                         interrupt-parent = <&intc>;
 228                         interrupts = <0 47 4>;
 229                         reg = <0xe0101000 0x1000>;
 230                 } ;
 231
 232                 slcr: slcr@f8000000 {
 233                         #address-cells = <1>;
 234                         #size-cells = <1>;
 235                         compatible = "xlnx,zynq-slcr", "syscon";
 236                         reg = <0xF8000000 0x1000>;
 237                         ranges;
 238                         clkc: clkc@100 {
 239                                 #clock-cells = <1>;
 240                                 compatible = "xlnx,ps7-clkc";
 241                                 ps-clk-frequency = <33333333>;
 242                                 fclk-enable = <0>;
 243                                 clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
 244                                                 "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
 245                                                 "dci", "lqspi", "smc", "pcap", "gem0", "gem1",
 246                                                 "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
 247                                                 "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
 248                                                 "dma", "usb0_aper", "usb1_aper", "gem0_aper",
 249                                                 "gem1_aper", "sdio0_aper", "sdio1_aper",
 250                                                 "spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
 251                                                 "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
 252                                                 "gpio_aper", "lqspi_aper", "smc_aper", "swdt",
 253                                                 "dbg_trc", "dbg_apb";
 254                                 reg = <0x100 0x100>;
 255                         };
 256                 };
 257
 258                 dmac_s: dmac@f8003000 {
 259                         compatible = "arm,pl330", "arm,primecell";
 260                         reg = <0xf8003000 0x1000>;
 261                         interrupt-parent = <&intc>;
 262                         interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
 263                                 "dma4", "dma5", "dma6", "dma7";
 264                         interrupts = <0 13 4>,
 265                                      <0 14 4>, <0 15 4>,
 266                                      <0 16 4>, <0 17 4>,
 267                                      <0 40 4>, <0 41 4>,
 268                                      <0 42 4>, <0 43 4>;
 269                         #dma-cells = <1>;
 270                         #dma-channels = <8>;
 271                         #dma-requests = <4>;
 272                         clocks = <&clkc 27>;
 273                         clock-names = "apb_pclk";
 274                 };
 275
 276                 devcfg: devcfg@f8007000 {
 277                         compatible = "xlnx,zynq-devcfg-1.0";
 278                         reg = <0xf8007000 0x100>;
 279                 };
 280
 281                 global_timer: timer@f8f00200 {
 282                         compatible = "arm,cortex-a9-global-timer";
 283                         reg = <0xf8f00200 0x20>;
 284                         interrupts = <1 11 0x301>;
 285                         interrupt-parent = <&intc>;
 286                         clocks = <&clkc 4>;
 287                 };
 288
 289                 ttc0: timer@f8001000 {
 290                         interrupt-parent = <&intc>;
 291                         interrupts = < 0 10 4 0 11 4 0 12 4 >;
 292                         compatible = "cdns,ttc";
 293                         clocks = <&clkc 6>;
 294                         reg = <0xF8001000 0x1000>;
 295                 };
 296
 297                 ttc1: timer@f8002000 {
 298                         interrupt-parent = <&intc>;
 299                         interrupts = < 0 37 4 0 38 4 0 39 4 >;
 300                         compatible = "cdns,ttc";
 301                         clocks = <&clkc 6>;
 302                         reg = <0xF8002000 0x1000>;
 303                 };
 304
 305                 scutimer: timer@f8f00600 {
 306                         interrupt-parent = <&intc>;
 307                         interrupts = < 1 13 0x301 >;
 308                         compatible = "arm,cortex-a9-twd-timer";
 309                         reg = < 0xf8f00600 0x20 >;
 310                         clocks = <&clkc 4>;
 311                 } ;
 312
 313                 usb0: usb@e0002000 {
 314                         compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
 315                         status = "disabled";
 316                         clocks = <&clkc 28>;
 317                         interrupt-parent = <&intc>;
 318                         interrupts = <0 21 4>;
 319                         reg = <0xe0002000 0x1000>;
 320                         phy_type = "ulpi";
 321                 };
 322
 323                 usb1: usb@e0003000 {
 324                         compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
 325                         status = "disabled";
 326                         clocks = <&clkc 29>;
 327                         interrupt-parent = <&intc>;
 328                         interrupts = <0 44 4>;
 329                         reg = <0xe0003000 0x1000>;
 330                         phy_type = "ulpi";
 331                 };
 332
 333                 watchdog0: watchdog@f8005000 {
 334                         clocks = <&clkc 45>;
 335                         compatible = "cdns,wdt-r1p2";
 336                         interrupt-parent = <&intc>;
 337                         interrupts = <0 9 1>;
 338                         reg = <0xf8005000 0x1000>;
 339                         timeout-sec = <10>;
 340                 };
 341         };
 342 };