arm64: zynqmp: Add reset-controller support in serdes driver
[oweals/u-boot.git] / arch / arm / dts / uniphier-sld8.dtsi
1 /*
2  * Device Tree Source for UniPhier sLD8 SoC
3  *
4  * Copyright (C) 2015-2016 Socionext Inc.
5  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
6  *
7  * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8  */
9
10 / {
11         compatible = "socionext,uniphier-sld8";
12         #address-cells = <1>;
13         #size-cells = <1>;
14
15         cpus {
16                 #address-cells = <1>;
17                 #size-cells = <0>;
18
19                 cpu@0 {
20                         device_type = "cpu";
21                         compatible = "arm,cortex-a9";
22                         reg = <0>;
23                         enable-method = "psci";
24                         next-level-cache = <&l2>;
25                 };
26         };
27
28         psci {
29                 compatible = "arm,psci-0.2";
30                 method = "smc";
31         };
32
33         clocks {
34                 refclk: ref {
35                         compatible = "fixed-clock";
36                         #clock-cells = <0>;
37                         clock-frequency = <25000000>;
38                 };
39
40                 arm_timer_clk: arm_timer_clk {
41                         #clock-cells = <0>;
42                         compatible = "fixed-clock";
43                         clock-frequency = <50000000>;
44                 };
45         };
46
47         soc {
48                 compatible = "simple-bus";
49                 #address-cells = <1>;
50                 #size-cells = <1>;
51                 ranges;
52                 interrupt-parent = <&intc>;
53
54                 l2: l2-cache@500c0000 {
55                         compatible = "socionext,uniphier-system-cache";
56                         reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
57                               <0x506c0000 0x400>;
58                         interrupts = <0 174 4>, <0 175 4>;
59                         cache-unified;
60                         cache-size = <(256 * 1024)>;
61                         cache-sets = <256>;
62                         cache-line-size = <128>;
63                         cache-level = <2>;
64                 };
65
66                 serial0: serial@54006800 {
67                         compatible = "socionext,uniphier-uart";
68                         status = "disabled";
69                         reg = <0x54006800 0x40>;
70                         interrupts = <0 33 4>;
71                         pinctrl-names = "default";
72                         pinctrl-0 = <&pinctrl_uart0>;
73                         clocks = <&peri_clk 0>;
74                         clock-frequency = <80000000>;
75                 };
76
77                 serial1: serial@54006900 {
78                         compatible = "socionext,uniphier-uart";
79                         status = "disabled";
80                         reg = <0x54006900 0x40>;
81                         interrupts = <0 35 4>;
82                         pinctrl-names = "default";
83                         pinctrl-0 = <&pinctrl_uart1>;
84                         clocks = <&peri_clk 1>;
85                         clock-frequency = <80000000>;
86                 };
87
88                 serial2: serial@54006a00 {
89                         compatible = "socionext,uniphier-uart";
90                         status = "disabled";
91                         reg = <0x54006a00 0x40>;
92                         interrupts = <0 37 4>;
93                         pinctrl-names = "default";
94                         pinctrl-0 = <&pinctrl_uart2>;
95                         clocks = <&peri_clk 2>;
96                         clock-frequency = <80000000>;
97                 };
98
99                 serial3: serial@54006b00 {
100                         compatible = "socionext,uniphier-uart";
101                         status = "disabled";
102                         reg = <0x54006b00 0x40>;
103                         interrupts = <0 29 4>;
104                         pinctrl-names = "default";
105                         pinctrl-0 = <&pinctrl_uart3>;
106                         clocks = <&peri_clk 3>;
107                         clock-frequency = <80000000>;
108                 };
109
110                 gpio: gpio@55000000 {
111                         compatible = "socionext,uniphier-gpio";
112                         reg = <0x55000000 0x200>;
113                         interrupt-parent = <&aidet>;
114                         interrupt-controller;
115                         #interrupt-cells = <2>;
116                         gpio-controller;
117                         #gpio-cells = <2>;
118                         gpio-ranges = <&pinctrl 0 0 0>,
119                                       <&pinctrl 104 0 0>,
120                                       <&pinctrl 112 0 0>;
121                         gpio-ranges-group-names = "gpio_range0",
122                                                   "gpio_range1",
123                                                   "gpio_range2";
124                         ngpios = <136>;
125                 };
126
127                 i2c0: i2c@58400000 {
128                         compatible = "socionext,uniphier-i2c";
129                         status = "disabled";
130                         reg = <0x58400000 0x40>;
131                         #address-cells = <1>;
132                         #size-cells = <0>;
133                         interrupts = <0 41 1>;
134                         pinctrl-names = "default";
135                         pinctrl-0 = <&pinctrl_i2c0>;
136                         clocks = <&peri_clk 4>;
137                         clock-frequency = <100000>;
138                 };
139
140                 i2c1: i2c@58480000 {
141                         compatible = "socionext,uniphier-i2c";
142                         status = "disabled";
143                         reg = <0x58480000 0x40>;
144                         #address-cells = <1>;
145                         #size-cells = <0>;
146                         interrupts = <0 42 1>;
147                         pinctrl-names = "default";
148                         pinctrl-0 = <&pinctrl_i2c1>;
149                         clocks = <&peri_clk 5>;
150                         clock-frequency = <100000>;
151                 };
152
153                 /* chip-internal connection for DMD */
154                 i2c2: i2c@58500000 {
155                         compatible = "socionext,uniphier-i2c";
156                         reg = <0x58500000 0x40>;
157                         #address-cells = <1>;
158                         #size-cells = <0>;
159                         interrupts = <0 43 1>;
160                         pinctrl-names = "default";
161                         pinctrl-0 = <&pinctrl_i2c2>;
162                         clocks = <&peri_clk 6>;
163                         clock-frequency = <400000>;
164                 };
165
166                 i2c3: i2c@58580000 {
167                         compatible = "socionext,uniphier-i2c";
168                         status = "disabled";
169                         reg = <0x58580000 0x40>;
170                         #address-cells = <1>;
171                         #size-cells = <0>;
172                         interrupts = <0 44 1>;
173                         pinctrl-names = "default";
174                         pinctrl-0 = <&pinctrl_i2c3>;
175                         clocks = <&peri_clk 7>;
176                         clock-frequency = <100000>;
177                 };
178
179                 system_bus: system-bus@58c00000 {
180                         compatible = "socionext,uniphier-system-bus";
181                         status = "disabled";
182                         reg = <0x58c00000 0x400>;
183                         #address-cells = <2>;
184                         #size-cells = <1>;
185                         pinctrl-names = "default";
186                         pinctrl-0 = <&pinctrl_system_bus>;
187                 };
188
189                 smpctrl@59801000 {
190                         compatible = "socionext,uniphier-smpctrl";
191                         reg = <0x59801000 0x400>;
192                 };
193
194                 mioctrl@59810000 {
195                         compatible = "socionext,uniphier-sld8-mioctrl",
196                                      "simple-mfd", "syscon";
197                         reg = <0x59810000 0x800>;
198
199                         mio_clk: clock {
200                                 compatible = "socionext,uniphier-sld8-mio-clock";
201                                 #clock-cells = <1>;
202                         };
203
204                         mio_rst: reset {
205                                 compatible = "socionext,uniphier-sld8-mio-reset";
206                                 #reset-cells = <1>;
207                         };
208                 };
209
210                 perictrl@59820000 {
211                         compatible = "socionext,uniphier-sld8-perictrl",
212                                      "simple-mfd", "syscon";
213                         reg = <0x59820000 0x200>;
214
215                         peri_clk: clock {
216                                 compatible = "socionext,uniphier-sld8-peri-clock";
217                                 #clock-cells = <1>;
218                         };
219
220                         peri_rst: reset {
221                                 compatible = "socionext,uniphier-sld8-peri-reset";
222                                 #reset-cells = <1>;
223                         };
224                 };
225
226                 sd: sdhc@5a400000 {
227                         compatible = "socionext,uniphier-sdhc";
228                         status = "disabled";
229                         reg = <0x5a400000 0x200>;
230                         interrupts = <0 76 4>;
231                         pinctrl-names = "default", "1.8v";
232                         pinctrl-0 = <&pinctrl_sd>;
233                         pinctrl-1 = <&pinctrl_sd_1v8>;
234                         clocks = <&mio_clk 0>;
235                         reset-names = "host", "bridge";
236                         resets = <&mio_rst 0>, <&mio_rst 3>;
237                         bus-width = <4>;
238                         cap-sd-highspeed;
239                         sd-uhs-sdr12;
240                         sd-uhs-sdr25;
241                         sd-uhs-sdr50;
242                 };
243
244                 emmc: sdhc@5a500000 {
245                         compatible = "socionext,uniphier-sdhc";
246                         status = "disabled";
247                         reg = <0x5a500000 0x200>;
248                         interrupts = <0 78 4>;
249                         pinctrl-names = "default", "1.8v";
250                         pinctrl-0 = <&pinctrl_emmc>;
251                         pinctrl-1 = <&pinctrl_emmc_1v8>;
252                         clocks = <&mio_clk 1>;
253                         reset-names = "host", "bridge";
254                         resets = <&mio_rst 1>, <&mio_rst 4>;
255                         bus-width = <8>;
256                         non-removable;
257                         cap-mmc-highspeed;
258                         cap-mmc-hw-reset;
259                 };
260
261                 usb0: usb@5a800100 {
262                         compatible = "socionext,uniphier-ehci", "generic-ehci";
263                         status = "disabled";
264                         reg = <0x5a800100 0x100>;
265                         interrupts = <0 80 4>;
266                         pinctrl-names = "default";
267                         pinctrl-0 = <&pinctrl_usb0>;
268                         clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
269                         resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
270                                  <&mio_rst 12>;
271                 };
272
273                 usb1: usb@5a810100 {
274                         compatible = "socionext,uniphier-ehci", "generic-ehci";
275                         status = "disabled";
276                         reg = <0x5a810100 0x100>;
277                         interrupts = <0 81 4>;
278                         pinctrl-names = "default";
279                         pinctrl-0 = <&pinctrl_usb1>;
280                         clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
281                         resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
282                                  <&mio_rst 13>;
283                 };
284
285                 usb2: usb@5a820100 {
286                         compatible = "socionext,uniphier-ehci", "generic-ehci";
287                         status = "disabled";
288                         reg = <0x5a820100 0x100>;
289                         interrupts = <0 82 4>;
290                         pinctrl-names = "default";
291                         pinctrl-0 = <&pinctrl_usb2>;
292                         clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>;
293                         resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
294                                  <&mio_rst 14>;
295                 };
296
297                 soc-glue@5f800000 {
298                         compatible = "socionext,uniphier-sld8-soc-glue",
299                                      "simple-mfd", "syscon";
300                         reg = <0x5f800000 0x2000>;
301
302                         pinctrl: pinctrl {
303                                 compatible = "socionext,uniphier-sld8-pinctrl";
304                         };
305                 };
306
307                 timer@60000200 {
308                         compatible = "arm,cortex-a9-global-timer";
309                         reg = <0x60000200 0x20>;
310                         interrupts = <1 11 0x104>;
311                         clocks = <&arm_timer_clk>;
312                 };
313
314                 timer@60000600 {
315                         compatible = "arm,cortex-a9-twd-timer";
316                         reg = <0x60000600 0x20>;
317                         interrupts = <1 13 0x104>;
318                         clocks = <&arm_timer_clk>;
319                 };
320
321                 intc: interrupt-controller@60001000 {
322                         compatible = "arm,cortex-a9-gic";
323                         reg = <0x60001000 0x1000>,
324                               <0x60000100 0x100>;
325                         #interrupt-cells = <3>;
326                         interrupt-controller;
327                 };
328
329                 aidet: aidet@61830000 {
330                         compatible = "socionext,uniphier-sld8-aidet";
331                         reg = <0x61830000 0x200>;
332                         interrupt-controller;
333                         #interrupt-cells = <2>;
334                 };
335
336                 sysctrl@61840000 {
337                         compatible = "socionext,uniphier-sld8-sysctrl",
338                                      "simple-mfd", "syscon";
339                         reg = <0x61840000 0x10000>;
340
341                         sys_clk: clock {
342                                 compatible = "socionext,uniphier-sld8-clock";
343                                 #clock-cells = <1>;
344                         };
345
346                         sys_rst: reset {
347                                 compatible = "socionext,uniphier-sld8-reset";
348                                 #reset-cells = <1>;
349                         };
350                 };
351
352                 nand: nand@68000000 {
353                         compatible = "socionext,uniphier-denali-nand-v5a";
354                         status = "disabled";
355                         reg-names = "nand_data", "denali_reg";
356                         reg = <0x68000000 0x20>, <0x68100000 0x1000>;
357                         interrupts = <0 65 4>;
358                         pinctrl-names = "default";
359                         pinctrl-0 = <&pinctrl_nand2cs>;
360                         clocks = <&sys_clk 2>;
361                 };
362         };
363 };
364
365 #include "uniphier-pinctrl.dtsi"