arm64: zynqmp: Add reset-controller support in serdes driver
[oweals/u-boot.git] / arch / arm / dts / uniphier-pro4.dtsi
1 /*
2  * Device Tree Source for UniPhier Pro4 SoC
3  *
4  * Copyright (C) 2015-2016 Socionext Inc.
5  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
6  *
7  * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8  */
9
10 / {
11         compatible = "socionext,uniphier-pro4";
12         #address-cells = <1>;
13         #size-cells = <1>;
14
15         cpus {
16                 #address-cells = <1>;
17                 #size-cells = <0>;
18
19                 cpu@0 {
20                         device_type = "cpu";
21                         compatible = "arm,cortex-a9";
22                         reg = <0>;
23                         enable-method = "psci";
24                         next-level-cache = <&l2>;
25                 };
26
27                 cpu@1 {
28                         device_type = "cpu";
29                         compatible = "arm,cortex-a9";
30                         reg = <1>;
31                         enable-method = "psci";
32                         next-level-cache = <&l2>;
33                 };
34         };
35
36         psci {
37                 compatible = "arm,psci-0.2";
38                 method = "smc";
39         };
40
41         clocks {
42                 refclk: ref {
43                         compatible = "fixed-clock";
44                         #clock-cells = <0>;
45                         clock-frequency = <25000000>;
46                 };
47
48                 arm_timer_clk: arm_timer_clk {
49                         #clock-cells = <0>;
50                         compatible = "fixed-clock";
51                         clock-frequency = <50000000>;
52                 };
53         };
54
55         soc {
56                 compatible = "simple-bus";
57                 #address-cells = <1>;
58                 #size-cells = <1>;
59                 ranges;
60                 interrupt-parent = <&intc>;
61
62                 l2: l2-cache@500c0000 {
63                         compatible = "socionext,uniphier-system-cache";
64                         reg = <0x500c0000 0x2000>, <0x503c0100 0x4>,
65                               <0x506c0000 0x400>;
66                         interrupts = <0 174 4>, <0 175 4>;
67                         cache-unified;
68                         cache-size = <(768 * 1024)>;
69                         cache-sets = <256>;
70                         cache-line-size = <128>;
71                         cache-level = <2>;
72                 };
73
74                 serial0: serial@54006800 {
75                         compatible = "socionext,uniphier-uart";
76                         status = "disabled";
77                         reg = <0x54006800 0x40>;
78                         interrupts = <0 33 4>;
79                         pinctrl-names = "default";
80                         pinctrl-0 = <&pinctrl_uart0>;
81                         clocks = <&peri_clk 0>;
82                         clock-frequency = <73728000>;
83                 };
84
85                 serial1: serial@54006900 {
86                         compatible = "socionext,uniphier-uart";
87                         status = "disabled";
88                         reg = <0x54006900 0x40>;
89                         interrupts = <0 35 4>;
90                         pinctrl-names = "default";
91                         pinctrl-0 = <&pinctrl_uart1>;
92                         clocks = <&peri_clk 1>;
93                         clock-frequency = <73728000>;
94                 };
95
96                 serial2: serial@54006a00 {
97                         compatible = "socionext,uniphier-uart";
98                         status = "disabled";
99                         reg = <0x54006a00 0x40>;
100                         interrupts = <0 37 4>;
101                         pinctrl-names = "default";
102                         pinctrl-0 = <&pinctrl_uart2>;
103                         clocks = <&peri_clk 2>;
104                         clock-frequency = <73728000>;
105                 };
106
107                 serial3: serial@54006b00 {
108                         compatible = "socionext,uniphier-uart";
109                         status = "disabled";
110                         reg = <0x54006b00 0x40>;
111                         interrupts = <0 177 4>;
112                         pinctrl-names = "default";
113                         pinctrl-0 = <&pinctrl_uart3>;
114                         clocks = <&peri_clk 3>;
115                         clock-frequency = <73728000>;
116                 };
117
118                 gpio: gpio@55000000 {
119                         compatible = "socionext,uniphier-gpio";
120                         reg = <0x55000000 0x200>;
121                         interrupt-parent = <&aidet>;
122                         interrupt-controller;
123                         #interrupt-cells = <2>;
124                         gpio-controller;
125                         #gpio-cells = <2>;
126                         gpio-ranges = <&pinctrl 0 0 0>;
127                         gpio-ranges-group-names = "gpio_range";
128                         ngpios = <248>;
129                 };
130
131                 i2c0: i2c@58780000 {
132                         compatible = "socionext,uniphier-fi2c";
133                         status = "disabled";
134                         reg = <0x58780000 0x80>;
135                         #address-cells = <1>;
136                         #size-cells = <0>;
137                         interrupts = <0 41 4>;
138                         pinctrl-names = "default";
139                         pinctrl-0 = <&pinctrl_i2c0>;
140                         clocks = <&peri_clk 4>;
141                         clock-frequency = <100000>;
142                 };
143
144                 i2c1: i2c@58781000 {
145                         compatible = "socionext,uniphier-fi2c";
146                         status = "disabled";
147                         reg = <0x58781000 0x80>;
148                         #address-cells = <1>;
149                         #size-cells = <0>;
150                         interrupts = <0 42 4>;
151                         pinctrl-names = "default";
152                         pinctrl-0 = <&pinctrl_i2c1>;
153                         clocks = <&peri_clk 5>;
154                         clock-frequency = <100000>;
155                 };
156
157                 i2c2: i2c@58782000 {
158                         compatible = "socionext,uniphier-fi2c";
159                         status = "disabled";
160                         reg = <0x58782000 0x80>;
161                         #address-cells = <1>;
162                         #size-cells = <0>;
163                         interrupts = <0 43 4>;
164                         pinctrl-names = "default";
165                         pinctrl-0 = <&pinctrl_i2c2>;
166                         clocks = <&peri_clk 6>;
167                         clock-frequency = <100000>;
168                 };
169
170                 i2c3: i2c@58783000 {
171                         compatible = "socionext,uniphier-fi2c";
172                         status = "disabled";
173                         reg = <0x58783000 0x80>;
174                         #address-cells = <1>;
175                         #size-cells = <0>;
176                         interrupts = <0 44 4>;
177                         pinctrl-names = "default";
178                         pinctrl-0 = <&pinctrl_i2c3>;
179                         clocks = <&peri_clk 7>;
180                         clock-frequency = <100000>;
181                 };
182
183                 /* i2c4 does not exist */
184
185                 /* chip-internal connection for DMD */
186                 i2c5: i2c@58785000 {
187                         compatible = "socionext,uniphier-fi2c";
188                         reg = <0x58785000 0x80>;
189                         #address-cells = <1>;
190                         #size-cells = <0>;
191                         interrupts = <0 25 4>;
192                         clocks = <&peri_clk 9>;
193                         clock-frequency = <400000>;
194                 };
195
196                 /* chip-internal connection for HDMI */
197                 i2c6: i2c@58786000 {
198                         compatible = "socionext,uniphier-fi2c";
199                         reg = <0x58786000 0x80>;
200                         #address-cells = <1>;
201                         #size-cells = <0>;
202                         interrupts = <0 26 4>;
203                         clocks = <&peri_clk 10>;
204                         clock-frequency = <400000>;
205                 };
206
207                 system_bus: system-bus@58c00000 {
208                         compatible = "socionext,uniphier-system-bus";
209                         status = "disabled";
210                         reg = <0x58c00000 0x400>;
211                         #address-cells = <2>;
212                         #size-cells = <1>;
213                         pinctrl-names = "default";
214                         pinctrl-0 = <&pinctrl_system_bus>;
215                 };
216
217                 smpctrl@59801000 {
218                         compatible = "socionext,uniphier-smpctrl";
219                         reg = <0x59801000 0x400>;
220                 };
221
222                 mioctrl@59810000 {
223                         compatible = "socionext,uniphier-pro4-mioctrl",
224                                      "simple-mfd", "syscon";
225                         reg = <0x59810000 0x800>;
226
227                         mio_clk: clock {
228                                 compatible = "socionext,uniphier-pro4-mio-clock";
229                                 #clock-cells = <1>;
230                         };
231
232                         mio_rst: reset {
233                                 compatible = "socionext,uniphier-pro4-mio-reset";
234                                 #reset-cells = <1>;
235                         };
236                 };
237
238                 perictrl@59820000 {
239                         compatible = "socionext,uniphier-pro4-perictrl",
240                                      "simple-mfd", "syscon";
241                         reg = <0x59820000 0x200>;
242
243                         peri_clk: clock {
244                                 compatible = "socionext,uniphier-pro4-peri-clock";
245                                 #clock-cells = <1>;
246                         };
247
248                         peri_rst: reset {
249                                 compatible = "socionext,uniphier-pro4-peri-reset";
250                                 #reset-cells = <1>;
251                         };
252                 };
253
254                 sd: sdhc@5a400000 {
255                         compatible = "socionext,uniphier-sdhc";
256                         status = "disabled";
257                         reg = <0x5a400000 0x200>;
258                         interrupts = <0 76 4>;
259                         pinctrl-names = "default", "1.8v";
260                         pinctrl-0 = <&pinctrl_sd>;
261                         pinctrl-1 = <&pinctrl_sd_1v8>;
262                         clocks = <&mio_clk 0>;
263                         reset-names = "host", "bridge";
264                         resets = <&mio_rst 0>, <&mio_rst 3>;
265                         bus-width = <4>;
266                         cap-sd-highspeed;
267                         sd-uhs-sdr12;
268                         sd-uhs-sdr25;
269                         sd-uhs-sdr50;
270                 };
271
272                 emmc: sdhc@5a500000 {
273                         compatible = "socionext,uniphier-sdhc";
274                         status = "disabled";
275                         reg = <0x5a500000 0x200>;
276                         interrupts = <0 78 4>;
277                         pinctrl-names = "default", "1.8v";
278                         pinctrl-0 = <&pinctrl_emmc>;
279                         pinctrl-1 = <&pinctrl_emmc_1v8>;
280                         clocks = <&mio_clk 1>;
281                         reset-names = "host", "bridge";
282                         resets = <&mio_rst 1>, <&mio_rst 4>;
283                         bus-width = <8>;
284                         non-removable;
285                         cap-mmc-highspeed;
286                         cap-mmc-hw-reset;
287                 };
288
289                 sd1: sdhc@5a600000 {
290                         compatible = "socionext,uniphier-sdhc";
291                         status = "disabled";
292                         reg = <0x5a600000 0x200>;
293                         interrupts = <0 85 4>;
294                         pinctrl-names = "default", "1.8v";
295                         pinctrl-0 = <&pinctrl_sd1>;
296                         pinctrl-1 = <&pinctrl_sd1_1v8>;
297                         clocks = <&mio_clk 2>;
298                         resets = <&mio_rst 2>, <&mio_rst 5>;
299                         bus-width = <4>;
300                         cap-sd-highspeed;
301                         sd-uhs-sdr12;
302                         sd-uhs-sdr25;
303                         sd-uhs-sdr50;
304                 };
305
306                 usb2: usb@5a800100 {
307                         compatible = "socionext,uniphier-ehci", "generic-ehci";
308                         status = "disabled";
309                         reg = <0x5a800100 0x100>;
310                         interrupts = <0 80 4>;
311                         pinctrl-names = "default";
312                         pinctrl-0 = <&pinctrl_usb2>;
313                         clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>;
314                         resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
315                                  <&mio_rst 12>;
316                 };
317
318                 usb3: usb@5a810100 {
319                         compatible = "socionext,uniphier-ehci", "generic-ehci";
320                         status = "disabled";
321                         reg = <0x5a810100 0x100>;
322                         interrupts = <0 81 4>;
323                         pinctrl-names = "default";
324                         pinctrl-0 = <&pinctrl_usb3>;
325                         clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>;
326                         resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
327                                  <&mio_rst 13>;
328                 };
329
330                 soc-glue@5f800000 {
331                         compatible = "socionext,uniphier-pro4-soc-glue",
332                                      "simple-mfd", "syscon";
333                         reg = <0x5f800000 0x2000>;
334
335                         pinctrl: pinctrl {
336                                 compatible = "socionext,uniphier-pro4-pinctrl";
337                         };
338                 };
339
340                 aidet: aidet@5fc20000 {
341                         compatible = "socionext,uniphier-pro4-aidet";
342                         reg = <0x5fc20000 0x200>;
343                         interrupt-controller;
344                         #interrupt-cells = <2>;
345                 };
346
347                 timer@60000200 {
348                         compatible = "arm,cortex-a9-global-timer";
349                         reg = <0x60000200 0x20>;
350                         interrupts = <1 11 0x304>;
351                         clocks = <&arm_timer_clk>;
352                 };
353
354                 timer@60000600 {
355                         compatible = "arm,cortex-a9-twd-timer";
356                         reg = <0x60000600 0x20>;
357                         interrupts = <1 13 0x304>;
358                         clocks = <&arm_timer_clk>;
359                 };
360
361                 intc: interrupt-controller@60001000 {
362                         compatible = "arm,cortex-a9-gic";
363                         reg = <0x60001000 0x1000>,
364                               <0x60000100 0x100>;
365                         #interrupt-cells = <3>;
366                         interrupt-controller;
367                 };
368
369                 sysctrl@61840000 {
370                         compatible = "socionext,uniphier-pro4-sysctrl",
371                                      "simple-mfd", "syscon";
372                         reg = <0x61840000 0x10000>;
373
374                         sys_clk: clock {
375                                 compatible = "socionext,uniphier-pro4-clock";
376                                 #clock-cells = <1>;
377                         };
378
379                         sys_rst: reset {
380                                 compatible = "socionext,uniphier-pro4-reset";
381                                 #reset-cells = <1>;
382                         };
383                 };
384
385                 usb0: usb@65b00000 {
386                         compatible = "socionext,uniphier-pro4-dwc3";
387                         status = "disabled";
388                         reg = <0x65b00000 0x1000>;
389                         #address-cells = <1>;
390                         #size-cells = <1>;
391                         ranges;
392                         pinctrl-names = "default";
393                         pinctrl-0 = <&pinctrl_usb0>;
394                         dwc3@65a00000 {
395                                 compatible = "snps,dwc3";
396                                 reg = <0x65a00000 0x10000>;
397                                 interrupts = <0 134 4>;
398                                 dr_mode = "host";
399                                 tx-fifo-resize;
400                         };
401                 };
402
403                 usb1: usb@65d00000 {
404                         compatible = "socionext,uniphier-pro4-dwc3";
405                         status = "disabled";
406                         reg = <0x65d00000 0x1000>;
407                         #address-cells = <1>;
408                         #size-cells = <1>;
409                         ranges;
410                         pinctrl-names = "default";
411                         pinctrl-0 = <&pinctrl_usb1>;
412                         dwc3@65c00000 {
413                                 compatible = "snps,dwc3";
414                                 reg = <0x65c00000 0x10000>;
415                                 interrupts = <0 137 4>;
416                                 dr_mode = "host";
417                                 tx-fifo-resize;
418                         };
419                 };
420
421                 nand: nand@68000000 {
422                         compatible = "socionext,uniphier-denali-nand-v5a";
423                         status = "disabled";
424                         reg-names = "nand_data", "denali_reg";
425                         reg = <0x68000000 0x20>, <0x68100000 0x1000>;
426                         interrupts = <0 65 4>;
427                         pinctrl-names = "default";
428                         pinctrl-0 = <&pinctrl_nand>;
429                         clocks = <&sys_clk 2>;
430                 };
431         };
432 };
433
434 #include "uniphier-pinctrl.dtsi"