2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
42 #include "sunxi-reference-design-tablet.dtsi"
44 #include <dt-bindings/pwm/pwm.h>
51 backlight: backlight {
52 compatible = "pwm-backlight";
53 pinctrl-names = "default";
54 pinctrl-0 = <&bl_en_pin>;
55 pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
56 brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
57 default-brightness-level = <8>;
58 enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */
62 stdout-path = "serial0:115200n8";
68 * The gsl1680 is rated at 400KHz and it will not work reliable at
69 * 100KHz, this has been confirmed on multiple different q8 tablets.
70 * The gsl1680 is the only device on this bus.
72 clock-frequency = <400000>;
74 gsl1680: touchscreen@40 {
75 compatible = "silead,gsl1680";
77 interrupt-parent = <&pio>;
78 interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
79 pinctrl-names = "default";
80 pinctrl-0 = <&ts_power_pin>;
81 power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
82 /* Most tablets use this touchscreen, but not all */
88 pinctrl-names = "default";
89 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
90 vmmc-supply = <®_dcdc1>;
92 cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */
98 bl_en_pin: bl_en_pin@0 {
99 allwinner,pins = "PH6";
100 allwinner,function = "gpio_in";
101 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
102 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
105 mmc0_cd_pin: mmc0_cd_pin@0 {
106 allwinner,pins = "PB4";
107 allwinner,function = "gpio_in";
108 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
109 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
112 ts_power_pin: ts_power_pin@0 {
113 allwinner,pins = "PH1";
114 allwinner,function = "gpio_out";
115 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
116 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
119 usb0_id_detect_pin: usb0_id_detect_pin@0 {
120 allwinner,pins = "PH8";
121 allwinner,function = "gpio_in";
122 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
123 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
131 compatible = "x-powers,axp223";
133 interrupt-parent = <&nmi_intc>;
134 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
135 eldoin-supply = <®_dcdc1>;
136 drivevbus-supply = <®_vcc5v0>;
137 x-powers,drive-vbus-en;
141 #include "axp22x.dtsi"
145 regulator-min-microvolt = <3000000>;
146 regulator-max-microvolt = <3000000>;
147 regulator-name = "vcc-io";
152 regulator-min-microvolt = <2350000>;
153 regulator-max-microvolt = <2650000>;
154 regulator-name = "vdd-dll";
159 regulator-min-microvolt = <2700000>;
160 regulator-max-microvolt = <3300000>;
161 regulator-name = "vcc-pll-avcc";
165 regulator-name = "vcc-lcd";
170 regulator-min-microvolt = <900000>;
171 regulator-max-microvolt = <1400000>;
172 regulator-name = "vdd-cpus";
177 regulator-min-microvolt = <3000000>;
178 regulator-max-microvolt = <3000000>;
179 regulator-name = "vcc-3v0";
184 regulator-min-microvolt = <900000>;
185 regulator-max-microvolt = <1400000>;
186 regulator-name = "vdd-sys";
191 regulator-min-microvolt = <900000>;
192 regulator-max-microvolt = <1400000>;
193 regulator-name = "vdd-cpu";
198 regulator-min-microvolt = <1500000>;
199 regulator-max-microvolt = <1500000>;
200 regulator-name = "vcc-dram";
204 regulator-min-microvolt = <3300000>;
205 regulator-max-microvolt = <3300000>;
206 regulator-name = "vcc-wifi";
210 regulator-name = "usb0-vbus";
215 regulator-name = "vcc-rtc";
219 pinctrl-names = "default";
220 pinctrl-0 = <&r_uart_pins_a>;
225 vcc-lcd-supply = <®_dc1sw>;
238 pinctrl-names = "default";
239 pinctrl-0 = <&usb0_id_detect_pin>;
240 usb0_id_det-gpio = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */
241 usb0_vbus_power-supply = <&usb_power_supply>;
242 usb0_vbus-supply = <®_drivevbus>;