2 * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com>
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
44 #include "sun8i-h3.dtsi"
45 #include "sunxi-common-regulators.dtsi"
47 #include <dt-bindings/gpio/gpio.h>
48 #include <dt-bindings/input/input.h>
49 #include <dt-bindings/pinctrl/sun4i-a10.h>
52 model = "Xunlong Orange Pi Plus";
53 compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3";
60 stdout-path = "serial0:115200n8";
63 reg_usb3_vbus: usb3-vbus {
64 compatible = "regulator-fixed";
65 pinctrl-names = "default";
66 pinctrl-0 = <&usb3_vbus_pin_a>;
67 regulator-name = "usb3-vbus";
68 regulator-min-microvolt = <5000000>;
69 regulator-max-microvolt = <5000000>;
72 gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
76 compatible = "gpio-leds";
77 pinctrl-names = "default";
78 pinctrl-0 = <&leds_opc>;
81 label = "status:red:user";
82 gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
87 compatible = "gpio-leds";
88 pinctrl-names = "default";
89 pinctrl-0 = <&leds_r_opc>;
92 label = "pwr:green:user";
93 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
99 compatible = "gpio-keys";
102 pinctrl-names = "default";
103 pinctrl-0 = <&sw_r_opc>;
107 linux,code = <BTN_0>;
108 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
114 leds_opc: led_pins@0 {
115 allwinner,pins = "PA15";
116 allwinner,function = "gpio_out";
117 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
118 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
123 leds_r_opc: led_pins@0 {
124 allwinner,pins = "PL10";
125 allwinner,function = "gpio_out";
126 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
127 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
130 sw_r_opc: key_pins@0 {
131 allwinner,pins = "PL03";
132 allwinner,function = "gpio_in";
133 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
134 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
147 usb3_vbus_pin_a: usb3_vbus_pin@0 {
148 allwinner,pins = "PG11";
149 allwinner,function = "gpio_out";
150 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
151 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
156 pinctrl-names = "default";
157 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
158 vmmc-supply = <®_vcc3v3>;
160 cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
166 gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
171 pinctrl-names = "default";
172 pinctrl-0 = <&uart0_pins_a>;
177 allwinner,pins = "PG13";
181 usb1_vbus-supply = <®_usb1_vbus>;
182 usb3_vbus-supply = <®_usb3_vbus>;