2 * Copyright 2015 Vishnu Patekar
4 * Vishnu Patekar <vishnupatekar0510@gmail.com>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
46 #include "skeleton.dtsi"
48 #include <dt-bindings/interrupt-controller/arm-gic.h>
50 #include <dt-bindings/pinctrl/sun4i-a10.h>
53 interrupt-parent = <&gic>;
60 compatible = "arm,cortex-a7";
66 compatible = "arm,cortex-a7";
72 compatible = "arm,cortex-a7";
78 compatible = "arm,cortex-a7";
84 compatible = "arm,cortex-a7";
90 compatible = "arm,cortex-a7";
96 compatible = "arm,cortex-a7";
102 compatible = "arm,cortex-a7";
109 compatible = "arm,armv7-timer";
110 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
111 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
112 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
113 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
117 #address-cells = <1>;
121 /* TODO: PRCM block has a mux for this. */
124 compatible = "fixed-clock";
125 clock-frequency = <24000000>;
126 clock-output-names = "osc24M";
130 * This is called "internal OSC" in some places.
131 * It is an internal RC-based oscillator.
132 * TODO: Its controls are in the PRCM block.
136 compatible = "fixed-clock";
137 clock-frequency = <16000000>;
138 clock-output-names = "osc16M";
141 osc16Md512: osc16Md512_clk {
143 compatible = "fixed-factor-clock";
147 clock-output-names = "osc16M-d512";
152 compatible = "simple-bus";
153 #address-cells = <1>;
157 pio: pinctrl@01c20800 {
158 compatible = "allwinner,sun8i-a83t-pinctrl";
159 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
160 <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
161 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
162 reg = <0x01c20800 0x400>;
165 interrupt-controller;
166 #interrupt-cells = <3>;
169 mmc0_pins_a: mmc0@0 {
170 allwinner,pins = "PF0", "PF1", "PF2",
172 allwinner,function = "mmc0";
173 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
174 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
177 uart0_pins_a: uart0@0 {
178 allwinner,pins = "PF2", "PF4";
179 allwinner,function = "uart0";
180 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
181 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
184 uart0_pins_b: uart0@1 {
185 allwinner,pins = "PB9", "PB10";
186 allwinner,function = "uart0";
187 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
188 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
193 compatible = "allwinner,sun4i-a10-timer";
194 reg = <0x01c20c00 0xa0>;
195 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
196 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
201 compatible = "allwinner,sun6i-a31-wdt";
202 reg = <0x01c20ca0 0x20>;
203 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
207 uart0: serial@01c28000 {
208 compatible = "snps,dw-apb-uart";
209 reg = <0x01c28000 0x400>;
210 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
217 gic: interrupt-controller@01c81000 {
218 compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
219 reg = <0x01c81000 0x1000>,
223 interrupt-controller;
224 #interrupt-cells = <3>;
225 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
228 usb_otg: usb@01c19000 {
229 compatible = "allwinner,sun8i-a33-musb";
230 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
231 interrupt-names = "mc";
235 ehci0: usb@01c1a000 {
236 compatible = "allwinner,sun8i-a83t-ehci", "generic-ehci";
237 reg = <0x01c1a000 0x100>;
238 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
242 ohci0: usb@01c1a400 {
243 compatible = "allwinner,sun8i-a83t-ohci", "generic-ohci";
244 reg = <0x01c1a400 0x100>;
245 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
249 ehci1: usb@01c1b000 {
250 compatible = "allwinner,sun8i-a83t-ehci", "generic-ehci";
251 reg = <0x01c1b000 0x100>;
252 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
256 r_pio: pinctrl@01f02c00 {
257 compatible = "allwinner,sun8i-a83t-r-pinctrl";
258 reg = <0x01f02c00 0x400>;
259 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;