2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
4 * Hans de Goede <hdegoede@redhat.com>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
21 * You should have received a copy of the GNU General Public
22 * License along with this file; if not, write to the Free
23 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
28 * b) Permission is hereby granted, free of charge, to any person
29 * obtaining a copy of this software and associated documentation
30 * files (the "Software"), to deal in the Software without
31 * restriction, including without limitation the rights to use,
32 * copy, modify, merge, publish, distribute, sublicense, and/or
33 * sell copies of the Software, and to permit persons to whom the
34 * Software is furnished to do so, subject to the following
37 * The above copyright notice and this permission notice shall be
38 * included in all copies or substantial portions of the Software.
40 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
41 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
42 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
43 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
44 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
45 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
46 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
47 * OTHER DEALINGS IN THE SOFTWARE.
51 #include "sun7i-a20.dtsi"
52 #include "sunxi-common-regulators.dtsi"
54 #include <dt-bindings/gpio/gpio.h>
55 #include <dt-bindings/interrupt-controller/irq.h>
56 #include <dt-bindings/pinctrl/sun4i-a10.h>
59 model = "Orange Pi Mini";
60 compatible = "xunlong,orangepi-mini", "allwinner,sun7i-a20";
67 stdout-path = "serial0:115200n8";
71 compatible = "gpio-leds";
72 pinctrl-names = "default";
73 pinctrl-0 = <&led_pins_orangepi>;
76 label = "orangepi:green:usr";
77 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */
81 label = "orangepi:blue:usr";
82 gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */
86 reg_gmac_3v3: gmac-3v3 {
87 compatible = "regulator-fixed";
88 pinctrl-names = "default";
89 pinctrl-0 = <&gmac_power_pin_orangepi>;
90 regulator-name = "gmac-3v3";
91 regulator-min-microvolt = <3300000>;
92 regulator-max-microvolt = <3300000>;
93 startup-delay-us = <100000>;
95 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
112 pinctrl-names = "default";
113 pinctrl-0 = <&gmac_pins_rgmii_a>;
116 phy-supply = <®_gmac_3v3>;
119 phy1: ethernet-phy@1 {
125 pinctrl-names = "default";
126 pinctrl-0 = <&i2c0_pins_a>;
131 interrupt-parent = <&nmi_intc>;
132 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
136 #include "axp209.dtsi"
139 pinctrl-names = "default";
140 pinctrl-0 = <&ir0_pins_a>;
145 pinctrl-names = "default";
146 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_orangepi>;
147 vmmc-supply = <®_vcc3v3>;
149 cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
155 pinctrl-names = "default";
156 pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_orangepi>;
157 vmmc-supply = <®_vcc3v3>;
159 cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
165 mmc0_cd_pin_orangepi: mmc0_cd_pin@0 {
166 allwinner,pins = "PH10";
167 allwinner,function = "gpio_in";
168 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
169 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
172 mmc3_cd_pin_orangepi: mmc3_cd_pin@0 {
173 allwinner,pins = "PH11";
174 allwinner,function = "gpio_in";
175 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
176 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
179 usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
180 allwinner,pins = "PH22";
181 allwinner,function = "gpio_out";
182 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
183 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
186 gmac_power_pin_orangepi: gmac_power_pin@0 {
187 allwinner,pins = "PH23";
188 allwinner,function = "gpio_out";
189 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
190 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
193 led_pins_orangepi: led_pins@0 {
194 allwinner,pins = "PH24", "PH25";
195 allwinner,function = "gpio_out";
196 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
197 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
200 usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
201 allwinner,pins = "PH26";
202 allwinner,function = "gpio_out";
203 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
204 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
210 regulator-min-microvolt = <1000000>;
211 regulator-max-microvolt = <1500000>;
212 regulator-name = "vdd-cpu";
217 regulator-min-microvolt = <1000000>;
218 regulator-max-microvolt = <1400000>;
219 regulator-name = "vdd-int-pll";
223 regulator-name = "vdd-rtc";
228 regulator-min-microvolt = <3000000>;
229 regulator-max-microvolt = <3000000>;
230 regulator-name = "avcc";
234 pinctrl-0 = <&usb1_vbus_pin_bananapro>;
235 gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */
240 pinctrl-0 = <&usb2_vbus_pin_bananapro>;
241 gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
246 pinctrl-names = "default";
247 pinctrl-0 = <&uart0_pins_a>;
252 usb1_vbus-supply = <®_usb1_vbus>;
253 usb2_vbus-supply = <®_usb2_vbus>;