arm: zynq: Add board support for cc108
[oweals/u-boot.git] / arch / arm / dts / sun6i-a31.dtsi
1 /*
2  * Copyright 2013 Maxime Ripard
3  *
4  * Maxime Ripard <maxime.ripard@free-electrons.com>
5  *
6  * This file is dual-licensed: you can use it either under the terms
7  * of the GPL or the X11 license, at your option. Note that this dual
8  * licensing only applies to this file, and not this project as a
9  * whole.
10  *
11  *  a) This file is free software; you can redistribute it and/or
12  *     modify it under the terms of the GNU General Public License as
13  *     published by the Free Software Foundation; either version 2 of the
14  *     License, or (at your option) any later version.
15  *
16  *     This file is distributed in the hope that it will be useful,
17  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
18  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19  *     GNU General Public License for more details.
20  *
21  * Or, alternatively,
22  *
23  *  b) Permission is hereby granted, free of charge, to any person
24  *     obtaining a copy of this software and associated documentation
25  *     files (the "Software"), to deal in the Software without
26  *     restriction, including without limitation the rights to use,
27  *     copy, modify, merge, publish, distribute, sublicense, and/or
28  *     sell copies of the Software, and to permit persons to whom the
29  *     Software is furnished to do so, subject to the following
30  *     conditions:
31  *
32  *     The above copyright notice and this permission notice shall be
33  *     included in all copies or substantial portions of the Software.
34  *
35  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42  *     OTHER DEALINGS IN THE SOFTWARE.
43  */
44
45 #include "skeleton.dtsi"
46
47 #include <dt-bindings/interrupt-controller/arm-gic.h>
48 #include <dt-bindings/thermal/thermal.h>
49
50 #include <dt-bindings/pinctrl/sun4i-a10.h>
51
52 / {
53         interrupt-parent = <&gic>;
54
55         aliases {
56                 ethernet0 = &gmac;
57         };
58
59         chosen {
60                 #address-cells = <1>;
61                 #size-cells = <1>;
62                 ranges;
63
64                 simplefb_hdmi: framebuffer@0 {
65                         compatible = "allwinner,simple-framebuffer",
66                                      "simple-framebuffer";
67                         allwinner,pipeline = "de_be0-lcd0-hdmi";
68                         clocks = <&pll6 0>;
69                         status = "disabled";
70                 };
71
72                 simplefb_lcd: framebuffer@1 {
73                         compatible = "allwinner,simple-framebuffer",
74                                      "simple-framebuffer";
75                         allwinner,pipeline = "de_be0-lcd0";
76                         clocks = <&pll6 0>;
77                         status = "disabled";
78                 };
79         };
80
81         timer {
82                 compatible = "arm,armv7-timer";
83                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
84                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
85                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
86                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
87                 clock-frequency = <24000000>;
88                 arm,cpu-registers-not-fw-configured;
89         };
90
91         cpus {
92                 enable-method = "allwinner,sun6i-a31";
93                 #address-cells = <1>;
94                 #size-cells = <0>;
95
96                 cpu0: cpu@0 {
97                         compatible = "arm,cortex-a7";
98                         device_type = "cpu";
99                         reg = <0>;
100                         clocks = <&cpu>;
101                         clock-latency = <244144>; /* 8 32k periods */
102                         operating-points = <
103                                 /* kHz    uV */
104                                 1008000 1200000
105                                 864000  1200000
106                                 720000  1100000
107                                 480000  1000000
108                                 >;
109                         #cooling-cells = <2>;
110                         cooling-min-level = <0>;
111                         cooling-max-level = <3>;
112                 };
113
114                 cpu@1 {
115                         compatible = "arm,cortex-a7";
116                         device_type = "cpu";
117                         reg = <1>;
118                 };
119
120                 cpu@2 {
121                         compatible = "arm,cortex-a7";
122                         device_type = "cpu";
123                         reg = <2>;
124                 };
125
126                 cpu@3 {
127                         compatible = "arm,cortex-a7";
128                         device_type = "cpu";
129                         reg = <3>;
130                 };
131         };
132
133         thermal-zones {
134                 cpu_thermal {
135                         /* milliseconds */
136                         polling-delay-passive = <250>;
137                         polling-delay = <1000>;
138                         thermal-sensors = <&rtp>;
139
140                         cooling-maps {
141                                 map0 {
142                                         trip = <&cpu_alert0>;
143                                         cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
144                                 };
145                         };
146
147                         trips {
148                                 cpu_alert0: cpu_alert0 {
149                                         /* milliCelsius */
150                                         temperature = <70000>;
151                                         hysteresis = <2000>;
152                                         type = "passive";
153                                 };
154
155                                 cpu_crit: cpu_crit {
156                                         /* milliCelsius */
157                                         temperature = <100000>;
158                                         hysteresis = <2000>;
159                                         type = "critical";
160                                 };
161                         };
162                 };
163         };
164
165         memory {
166                 reg = <0x40000000 0x80000000>;
167         };
168
169         pmu {
170                 compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
171                 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
172                              <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
173                              <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
174                              <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
175         };
176
177         clocks {
178                 #address-cells = <1>;
179                 #size-cells = <1>;
180                 ranges;
181
182                 osc24M: osc24M {
183                         #clock-cells = <0>;
184                         compatible = "fixed-clock";
185                         clock-frequency = <24000000>;
186                 };
187
188                 osc32k: clk@0 {
189                         #clock-cells = <0>;
190                         compatible = "fixed-clock";
191                         clock-frequency = <32768>;
192                         clock-output-names = "osc32k";
193                 };
194
195                 pll1: clk@01c20000 {
196                         #clock-cells = <0>;
197                         compatible = "allwinner,sun6i-a31-pll1-clk";
198                         reg = <0x01c20000 0x4>;
199                         clocks = <&osc24M>;
200                         clock-output-names = "pll1";
201                 };
202
203                 pll6: clk@01c20028 {
204                         #clock-cells = <1>;
205                         compatible = "allwinner,sun6i-a31-pll6-clk";
206                         reg = <0x01c20028 0x4>;
207                         clocks = <&osc24M>;
208                         clock-output-names = "pll6", "pll6x2";
209                 };
210
211                 cpu: cpu@01c20050 {
212                         #clock-cells = <0>;
213                         compatible = "allwinner,sun4i-a10-cpu-clk";
214                         reg = <0x01c20050 0x4>;
215
216                         /*
217                          * PLL1 is listed twice here.
218                          * While it looks suspicious, it's actually documented
219                          * that way both in the datasheet and in the code from
220                          * Allwinner.
221                          */
222                         clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>;
223                         clock-output-names = "cpu";
224                 };
225
226                 axi: axi@01c20050 {
227                         #clock-cells = <0>;
228                         compatible = "allwinner,sun4i-a10-axi-clk";
229                         reg = <0x01c20050 0x4>;
230                         clocks = <&cpu>;
231                         clock-output-names = "axi";
232                 };
233
234                 ahb1: ahb1@01c20054 {
235                         #clock-cells = <0>;
236                         compatible = "allwinner,sun6i-a31-ahb1-clk";
237                         reg = <0x01c20054 0x4>;
238                         clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
239                         clock-output-names = "ahb1";
240
241                         /*
242                          * Clock AHB1 from PLL6, instead of CPU/AXI which
243                          * has rate changes due to cpufreq. Also the DMA
244                          * controller requires AHB1 clocked from PLL6.
245                          */
246                         assigned-clocks = <&ahb1>;
247                         assigned-clock-parents = <&pll6 0>;
248                 };
249
250                 ahb1_gates: clk@01c20060 {
251                         #clock-cells = <1>;
252                         compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
253                         reg = <0x01c20060 0x8>;
254                         clocks = <&ahb1>;
255                         clock-indices = <1>, <5>,
256                                         <6>, <8>, <9>,
257                                         <10>, <11>, <12>,
258                                         <13>, <14>,
259                                         <17>, <18>, <19>,
260                                         <20>, <21>, <22>,
261                                         <23>, <24>, <26>,
262                                         <27>, <29>,
263                                         <30>, <31>, <32>,
264                                         <36>, <37>, <40>,
265                                         <43>, <44>, <45>,
266                                         <46>, <47>, <50>,
267                                         <52>, <55>, <56>,
268                                         <57>, <58>;
269                         clock-output-names = "ahb1_mipidsi", "ahb1_ss",
270                                         "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
271                                         "ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
272                                         "ahb1_nand0", "ahb1_sdram",
273                                         "ahb1_gmac", "ahb1_ts", "ahb1_hstimer",
274                                         "ahb1_spi0", "ahb1_spi1", "ahb1_spi2",
275                                         "ahb1_spi3", "ahb1_otg", "ahb1_ehci0",
276                                         "ahb1_ehci1", "ahb1_ohci0",
277                                         "ahb1_ohci1", "ahb1_ohci2", "ahb1_ve",
278                                         "ahb1_lcd0", "ahb1_lcd1", "ahb1_csi",
279                                         "ahb1_hdmi", "ahb1_de0", "ahb1_de1",
280                                         "ahb1_fe0", "ahb1_fe1", "ahb1_mp",
281                                         "ahb1_gpu", "ahb1_deu0", "ahb1_deu1",
282                                         "ahb1_drc0", "ahb1_drc1";
283                 };
284
285                 apb1: apb1@01c20054 {
286                         #clock-cells = <0>;
287                         compatible = "allwinner,sun4i-a10-apb0-clk";
288                         reg = <0x01c20054 0x4>;
289                         clocks = <&ahb1>;
290                         clock-output-names = "apb1";
291                 };
292
293                 apb1_gates: clk@01c20068 {
294                         #clock-cells = <1>;
295                         compatible = "allwinner,sun6i-a31-apb1-gates-clk";
296                         reg = <0x01c20068 0x4>;
297                         clocks = <&apb1>;
298                         clock-indices = <0>, <4>,
299                                         <5>, <12>,
300                                         <13>;
301                         clock-output-names = "apb1_codec", "apb1_digital_mic",
302                                         "apb1_pio", "apb1_daudio0",
303                                         "apb1_daudio1";
304                 };
305
306                 apb2: clk@01c20058 {
307                         #clock-cells = <0>;
308                         compatible = "allwinner,sun4i-a10-apb1-clk";
309                         reg = <0x01c20058 0x4>;
310                         clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
311                         clock-output-names = "apb2";
312                 };
313
314                 apb2_gates: clk@01c2006c {
315                         #clock-cells = <1>;
316                         compatible = "allwinner,sun6i-a31-apb2-gates-clk";
317                         reg = <0x01c2006c 0x4>;
318                         clocks = <&apb2>;
319                         clock-indices = <0>, <1>,
320                                         <2>, <3>, <16>,
321                                         <17>, <18>, <19>,
322                                         <20>, <21>;
323                         clock-output-names = "apb2_i2c0", "apb2_i2c1",
324                                              "apb2_i2c2", "apb2_i2c3",
325                                              "apb2_uart0", "apb2_uart1",
326                                              "apb2_uart2", "apb2_uart3",
327                                              "apb2_uart4", "apb2_uart5";
328                 };
329
330                 mmc0_clk: clk@01c20088 {
331                         #clock-cells = <1>;
332                         compatible = "allwinner,sun4i-a10-mmc-clk";
333                         reg = <0x01c20088 0x4>;
334                         clocks = <&osc24M>, <&pll6 0>;
335                         clock-output-names = "mmc0",
336                                              "mmc0_output",
337                                              "mmc0_sample";
338                 };
339
340                 mmc1_clk: clk@01c2008c {
341                         #clock-cells = <1>;
342                         compatible = "allwinner,sun4i-a10-mmc-clk";
343                         reg = <0x01c2008c 0x4>;
344                         clocks = <&osc24M>, <&pll6 0>;
345                         clock-output-names = "mmc1",
346                                              "mmc1_output",
347                                              "mmc1_sample";
348                 };
349
350                 mmc2_clk: clk@01c20090 {
351                         #clock-cells = <1>;
352                         compatible = "allwinner,sun4i-a10-mmc-clk";
353                         reg = <0x01c20090 0x4>;
354                         clocks = <&osc24M>, <&pll6 0>;
355                         clock-output-names = "mmc2",
356                                              "mmc2_output",
357                                              "mmc2_sample";
358                 };
359
360                 mmc3_clk: clk@01c20094 {
361                         #clock-cells = <1>;
362                         compatible = "allwinner,sun4i-a10-mmc-clk";
363                         reg = <0x01c20094 0x4>;
364                         clocks = <&osc24M>, <&pll6 0>;
365                         clock-output-names = "mmc3",
366                                              "mmc3_output",
367                                              "mmc3_sample";
368                 };
369
370                 ss_clk: clk@01c2009c {
371                         #clock-cells = <0>;
372                         compatible = "allwinner,sun4i-a10-mod0-clk";
373                         reg = <0x01c2009c 0x4>;
374                         clocks = <&osc24M>, <&pll6 0>;
375                         clock-output-names = "ss";
376                 };
377
378                 spi0_clk: clk@01c200a0 {
379                         #clock-cells = <0>;
380                         compatible = "allwinner,sun4i-a10-mod0-clk";
381                         reg = <0x01c200a0 0x4>;
382                         clocks = <&osc24M>, <&pll6 0>;
383                         clock-output-names = "spi0";
384                 };
385
386                 spi1_clk: clk@01c200a4 {
387                         #clock-cells = <0>;
388                         compatible = "allwinner,sun4i-a10-mod0-clk";
389                         reg = <0x01c200a4 0x4>;
390                         clocks = <&osc24M>, <&pll6 0>;
391                         clock-output-names = "spi1";
392                 };
393
394                 spi2_clk: clk@01c200a8 {
395                         #clock-cells = <0>;
396                         compatible = "allwinner,sun4i-a10-mod0-clk";
397                         reg = <0x01c200a8 0x4>;
398                         clocks = <&osc24M>, <&pll6 0>;
399                         clock-output-names = "spi2";
400                 };
401
402                 spi3_clk: clk@01c200ac {
403                         #clock-cells = <0>;
404                         compatible = "allwinner,sun4i-a10-mod0-clk";
405                         reg = <0x01c200ac 0x4>;
406                         clocks = <&osc24M>, <&pll6 0>;
407                         clock-output-names = "spi3";
408                 };
409
410                 usb_clk: clk@01c200cc {
411                         #clock-cells = <1>;
412                         #reset-cells = <1>;
413                         compatible = "allwinner,sun6i-a31-usb-clk";
414                         reg = <0x01c200cc 0x4>;
415                         clocks = <&osc24M>;
416                         clock-indices = <8>, <9>, <10>,
417                                         <16>, <17>,
418                                         <18>;
419                         clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
420                                              "usb_ohci0", "usb_ohci1",
421                                              "usb_ohci2";
422                 };
423
424                 /*
425                  * The following two are dummy clocks, placeholders
426                  * used in the gmac_tx clock. The gmac driver will
427                  * choose one parent depending on the PHY interface
428                  * mode, using clk_set_rate auto-reparenting.
429                  *
430                  * The actual TX clock rate is not controlled by the
431                  * gmac_tx clock.
432                  */
433                 mii_phy_tx_clk: clk@1 {
434                         #clock-cells = <0>;
435                         compatible = "fixed-clock";
436                         clock-frequency = <25000000>;
437                         clock-output-names = "mii_phy_tx";
438                 };
439
440                 gmac_int_tx_clk: clk@2 {
441                         #clock-cells = <0>;
442                         compatible = "fixed-clock";
443                         clock-frequency = <125000000>;
444                         clock-output-names = "gmac_int_tx";
445                 };
446
447                 gmac_tx_clk: clk@01c200d0 {
448                         #clock-cells = <0>;
449                         compatible = "allwinner,sun7i-a20-gmac-clk";
450                         reg = <0x01c200d0 0x4>;
451                         clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
452                         clock-output-names = "gmac_tx";
453                 };
454         };
455
456         soc@01c00000 {
457                 compatible = "simple-bus";
458                 #address-cells = <1>;
459                 #size-cells = <1>;
460                 ranges;
461
462                 dma: dma-controller@01c02000 {
463                         compatible = "allwinner,sun6i-a31-dma";
464                         reg = <0x01c02000 0x1000>;
465                         interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
466                         clocks = <&ahb1_gates 6>;
467                         resets = <&ahb1_rst 6>;
468                         #dma-cells = <1>;
469                 };
470
471                 mmc0: mmc@01c0f000 {
472                         compatible = "allwinner,sun7i-a20-mmc",
473                                      "allwinner,sun5i-a13-mmc";
474                         reg = <0x01c0f000 0x1000>;
475                         clocks = <&ahb1_gates 8>,
476                                  <&mmc0_clk 0>,
477                                  <&mmc0_clk 1>,
478                                  <&mmc0_clk 2>;
479                         clock-names = "ahb",
480                                       "mmc",
481                                       "output",
482                                       "sample";
483                         resets = <&ahb1_rst 8>;
484                         reset-names = "ahb";
485                         interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
486                         status = "disabled";
487                         #address-cells = <1>;
488                         #size-cells = <0>;
489                 };
490
491                 mmc1: mmc@01c10000 {
492                         compatible = "allwinner,sun7i-a20-mmc",
493                                      "allwinner,sun5i-a13-mmc";
494                         reg = <0x01c10000 0x1000>;
495                         clocks = <&ahb1_gates 9>,
496                                  <&mmc1_clk 0>,
497                                  <&mmc1_clk 1>,
498                                  <&mmc1_clk 2>;
499                         clock-names = "ahb",
500                                       "mmc",
501                                       "output",
502                                       "sample";
503                         resets = <&ahb1_rst 9>;
504                         reset-names = "ahb";
505                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
506                         status = "disabled";
507                         #address-cells = <1>;
508                         #size-cells = <0>;
509                 };
510
511                 mmc2: mmc@01c11000 {
512                         compatible = "allwinner,sun7i-a20-mmc",
513                                      "allwinner,sun5i-a13-mmc";
514                         reg = <0x01c11000 0x1000>;
515                         clocks = <&ahb1_gates 10>,
516                                  <&mmc2_clk 0>,
517                                  <&mmc2_clk 1>,
518                                  <&mmc2_clk 2>;
519                         clock-names = "ahb",
520                                       "mmc",
521                                       "output",
522                                       "sample";
523                         resets = <&ahb1_rst 10>;
524                         reset-names = "ahb";
525                         interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
526                         status = "disabled";
527                         #address-cells = <1>;
528                         #size-cells = <0>;
529                 };
530
531                 mmc3: mmc@01c12000 {
532                         compatible = "allwinner,sun7i-a20-mmc",
533                                      "allwinner,sun5i-a13-mmc";
534                         reg = <0x01c12000 0x1000>;
535                         clocks = <&ahb1_gates 11>,
536                                  <&mmc3_clk 0>,
537                                  <&mmc3_clk 1>,
538                                  <&mmc3_clk 2>;
539                         clock-names = "ahb",
540                                       "mmc",
541                                       "output",
542                                       "sample";
543                         resets = <&ahb1_rst 11>;
544                         reset-names = "ahb";
545                         interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
546                         status = "disabled";
547                         #address-cells = <1>;
548                         #size-cells = <0>;
549                 };
550
551                 usb_otg: usb@01c19000 {
552                         compatible = "allwinner,sun6i-a31-musb";
553                         reg = <0x01c19000 0x0400>;
554                         clocks = <&ahb1_gates 24>;
555                         resets = <&ahb1_rst 24>;
556                         interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
557                         interrupt-names = "mc";
558                         phys = <&usbphy 0>;
559                         phy-names = "usb";
560                         extcon = <&usbphy 0>;
561                         status = "disabled";
562                 };
563
564                 usbphy: phy@01c19400 {
565                         compatible = "allwinner,sun6i-a31-usb-phy";
566                         reg = <0x01c19400 0x10>,
567                               <0x01c1a800 0x4>,
568                               <0x01c1b800 0x4>;
569                         reg-names = "phy_ctrl",
570                                     "pmu1",
571                                     "pmu2";
572                         clocks = <&usb_clk 8>,
573                                  <&usb_clk 9>,
574                                  <&usb_clk 10>;
575                         clock-names = "usb0_phy",
576                                       "usb1_phy",
577                                       "usb2_phy";
578                         resets = <&usb_clk 0>,
579                                  <&usb_clk 1>,
580                                  <&usb_clk 2>;
581                         reset-names = "usb0_reset",
582                                       "usb1_reset",
583                                       "usb2_reset";
584                         status = "disabled";
585                         #phy-cells = <1>;
586                 };
587
588                 ehci0: usb@01c1a000 {
589                         compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
590                         reg = <0x01c1a000 0x100>;
591                         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
592                         clocks = <&ahb1_gates 26>;
593                         resets = <&ahb1_rst 26>;
594                         phys = <&usbphy 1>;
595                         phy-names = "usb";
596                         status = "disabled";
597                 };
598
599                 ohci0: usb@01c1a400 {
600                         compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
601                         reg = <0x01c1a400 0x100>;
602                         interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
603                         clocks = <&ahb1_gates 29>, <&usb_clk 16>;
604                         resets = <&ahb1_rst 29>;
605                         phys = <&usbphy 1>;
606                         phy-names = "usb";
607                         status = "disabled";
608                 };
609
610                 ehci1: usb@01c1b000 {
611                         compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
612                         reg = <0x01c1b000 0x100>;
613                         interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
614                         clocks = <&ahb1_gates 27>;
615                         resets = <&ahb1_rst 27>;
616                         phys = <&usbphy 2>;
617                         phy-names = "usb";
618                         status = "disabled";
619                 };
620
621                 ohci1: usb@01c1b400 {
622                         compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
623                         reg = <0x01c1b400 0x100>;
624                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
625                         clocks = <&ahb1_gates 30>, <&usb_clk 17>;
626                         resets = <&ahb1_rst 30>;
627                         phys = <&usbphy 2>;
628                         phy-names = "usb";
629                         status = "disabled";
630                 };
631
632                 ohci2: usb@01c1c400 {
633                         compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
634                         reg = <0x01c1c400 0x100>;
635                         interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
636                         clocks = <&ahb1_gates 31>, <&usb_clk 18>;
637                         resets = <&ahb1_rst 31>;
638                         status = "disabled";
639                 };
640
641                 pio: pinctrl@01c20800 {
642                         compatible = "allwinner,sun6i-a31-pinctrl";
643                         reg = <0x01c20800 0x400>;
644                         interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
645                                      <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
646                                      <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
647                                      <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
648                         clocks = <&apb1_gates 5>;
649                         gpio-controller;
650                         interrupt-controller;
651                         #interrupt-cells = <3>;
652                         #gpio-cells = <3>;
653
654                         uart0_pins_a: uart0@0 {
655                                 allwinner,pins = "PH20", "PH21";
656                                 allwinner,function = "uart0";
657                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
658                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
659                         };
660
661                         i2c0_pins_a: i2c0@0 {
662                                 allwinner,pins = "PH14", "PH15";
663                                 allwinner,function = "i2c0";
664                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
665                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
666                         };
667
668                         i2c1_pins_a: i2c1@0 {
669                                 allwinner,pins = "PH16", "PH17";
670                                 allwinner,function = "i2c1";
671                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
672                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
673                         };
674
675                         i2c2_pins_a: i2c2@0 {
676                                 allwinner,pins = "PH18", "PH19";
677                                 allwinner,function = "i2c2";
678                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
679                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
680                         };
681
682                         mmc0_pins_a: mmc0@0 {
683                                 allwinner,pins = "PF0", "PF1", "PF2",
684                                                  "PF3", "PF4", "PF5";
685                                 allwinner,function = "mmc0";
686                                 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
687                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
688                         };
689
690                         mmc1_pins_a: mmc1@0 {
691                                 allwinner,pins = "PG0", "PG1", "PG2", "PG3",
692                                                  "PG4", "PG5";
693                                 allwinner,function = "mmc1";
694                                 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
695                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
696                         };
697
698                         mmc2_pins_a: mmc2@0 {
699                                 allwinner,pins = "PC6", "PC7", "PC8", "PC9",
700                                                  "PC10", "PC11";
701                                 allwinner,function = "mmc2";
702                                 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
703                                 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
704                         };
705
706                         mmc2_8bit_emmc_pins: mmc2@1 {
707                                 allwinner,pins = "PC6", "PC7", "PC8", "PC9",
708                                                  "PC10", "PC11", "PC12",
709                                                  "PC13", "PC14", "PC15",
710                                                  "PC24";
711                                 allwinner,function = "mmc2";
712                                 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
713                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
714                         };
715
716                         mmc3_8bit_emmc_pins: mmc3@1 {
717                                 allwinner,pins = "PC6", "PC7", "PC8", "PC9",
718                                                  "PC10", "PC11", "PC12",
719                                                  "PC13", "PC14", "PC15",
720                                                  "PC24";
721                                 allwinner,function = "mmc3";
722                                 allwinner,drive = <SUN4I_PINCTRL_40_MA>;
723                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
724                         };
725
726                         gmac_pins_mii_a: gmac_mii@0 {
727                                 allwinner,pins = "PA0", "PA1", "PA2", "PA3",
728                                                 "PA8", "PA9", "PA11",
729                                                 "PA12", "PA13", "PA14", "PA19",
730                                                 "PA20", "PA21", "PA22", "PA23",
731                                                 "PA24", "PA26", "PA27";
732                                 allwinner,function = "gmac";
733                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
734                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
735                         };
736
737                         gmac_pins_gmii_a: gmac_gmii@0 {
738                                 allwinner,pins = "PA0", "PA1", "PA2", "PA3",
739                                                 "PA4", "PA5", "PA6", "PA7",
740                                                 "PA8", "PA9", "PA10", "PA11",
741                                                 "PA12", "PA13", "PA14", "PA15",
742                                                 "PA16", "PA17", "PA18", "PA19",
743                                                 "PA20", "PA21", "PA22", "PA23",
744                                                 "PA24", "PA25", "PA26", "PA27";
745                                 allwinner,function = "gmac";
746                                 /*
747                                  * data lines in GMII mode run at 125MHz and
748                                  * might need a higher signal drive strength
749                                  */
750                                 allwinner,drive = <SUN4I_PINCTRL_30_MA>;
751                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
752                         };
753
754                         gmac_pins_rgmii_a: gmac_rgmii@0 {
755                                 allwinner,pins = "PA0", "PA1", "PA2", "PA3",
756                                                 "PA9", "PA10", "PA11",
757                                                 "PA12", "PA13", "PA14", "PA19",
758                                                 "PA20", "PA25", "PA26", "PA27";
759                                 allwinner,function = "gmac";
760                                 /*
761                                  * data lines in RGMII mode use DDR mode
762                                  * and need a higher signal drive strength
763                                  */
764                                 allwinner,drive = <SUN4I_PINCTRL_40_MA>;
765                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
766                         };
767                 };
768
769                 ahb1_rst: reset@01c202c0 {
770                         #reset-cells = <1>;
771                         compatible = "allwinner,sun6i-a31-ahb1-reset";
772                         reg = <0x01c202c0 0xc>;
773                 };
774
775                 apb1_rst: reset@01c202d0 {
776                         #reset-cells = <1>;
777                         compatible = "allwinner,sun6i-a31-clock-reset";
778                         reg = <0x01c202d0 0x4>;
779                 };
780
781                 apb2_rst: reset@01c202d8 {
782                         #reset-cells = <1>;
783                         compatible = "allwinner,sun6i-a31-clock-reset";
784                         reg = <0x01c202d8 0x4>;
785                 };
786
787                 timer@01c20c00 {
788                         compatible = "allwinner,sun4i-a10-timer";
789                         reg = <0x01c20c00 0xa0>;
790                         interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
791                                      <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
792                                      <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
793                                      <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
794                                      <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
795                         clocks = <&osc24M>;
796                 };
797
798                 wdt1: watchdog@01c20ca0 {
799                         compatible = "allwinner,sun6i-a31-wdt";
800                         reg = <0x01c20ca0 0x20>;
801                 };
802
803                 lradc: lradc@01c22800 {
804                         compatible = "allwinner,sun4i-a10-lradc-keys";
805                         reg = <0x01c22800 0x100>;
806                         interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
807                         status = "disabled";
808                 };
809
810                 rtp: rtp@01c25000 {
811                         compatible = "allwinner,sun6i-a31-ts";
812                         reg = <0x01c25000 0x100>;
813                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
814                         #thermal-sensor-cells = <0>;
815                 };
816
817                 uart0: serial@01c28000 {
818                         compatible = "snps,dw-apb-uart";
819                         reg = <0x01c28000 0x400>;
820                         interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
821                         reg-shift = <2>;
822                         reg-io-width = <4>;
823                         clocks = <&apb2_gates 16>;
824                         resets = <&apb2_rst 16>;
825                         dmas = <&dma 6>, <&dma 6>;
826                         dma-names = "rx", "tx";
827                         status = "disabled";
828                 };
829
830                 uart1: serial@01c28400 {
831                         compatible = "snps,dw-apb-uart";
832                         reg = <0x01c28400 0x400>;
833                         interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
834                         reg-shift = <2>;
835                         reg-io-width = <4>;
836                         clocks = <&apb2_gates 17>;
837                         resets = <&apb2_rst 17>;
838                         dmas = <&dma 7>, <&dma 7>;
839                         dma-names = "rx", "tx";
840                         status = "disabled";
841                 };
842
843                 uart2: serial@01c28800 {
844                         compatible = "snps,dw-apb-uart";
845                         reg = <0x01c28800 0x400>;
846                         interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
847                         reg-shift = <2>;
848                         reg-io-width = <4>;
849                         clocks = <&apb2_gates 18>;
850                         resets = <&apb2_rst 18>;
851                         dmas = <&dma 8>, <&dma 8>;
852                         dma-names = "rx", "tx";
853                         status = "disabled";
854                 };
855
856                 uart3: serial@01c28c00 {
857                         compatible = "snps,dw-apb-uart";
858                         reg = <0x01c28c00 0x400>;
859                         interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
860                         reg-shift = <2>;
861                         reg-io-width = <4>;
862                         clocks = <&apb2_gates 19>;
863                         resets = <&apb2_rst 19>;
864                         dmas = <&dma 9>, <&dma 9>;
865                         dma-names = "rx", "tx";
866                         status = "disabled";
867                 };
868
869                 uart4: serial@01c29000 {
870                         compatible = "snps,dw-apb-uart";
871                         reg = <0x01c29000 0x400>;
872                         interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
873                         reg-shift = <2>;
874                         reg-io-width = <4>;
875                         clocks = <&apb2_gates 20>;
876                         resets = <&apb2_rst 20>;
877                         dmas = <&dma 10>, <&dma 10>;
878                         dma-names = "rx", "tx";
879                         status = "disabled";
880                 };
881
882                 uart5: serial@01c29400 {
883                         compatible = "snps,dw-apb-uart";
884                         reg = <0x01c29400 0x400>;
885                         interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
886                         reg-shift = <2>;
887                         reg-io-width = <4>;
888                         clocks = <&apb2_gates 21>;
889                         resets = <&apb2_rst 21>;
890                         dmas = <&dma 22>, <&dma 22>;
891                         dma-names = "rx", "tx";
892                         status = "disabled";
893                 };
894
895                 i2c0: i2c@01c2ac00 {
896                         compatible = "allwinner,sun6i-a31-i2c";
897                         reg = <0x01c2ac00 0x400>;
898                         interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
899                         clocks = <&apb2_gates 0>;
900                         resets = <&apb2_rst 0>;
901                         status = "disabled";
902                         #address-cells = <1>;
903                         #size-cells = <0>;
904                 };
905
906                 i2c1: i2c@01c2b000 {
907                         compatible = "allwinner,sun6i-a31-i2c";
908                         reg = <0x01c2b000 0x400>;
909                         interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
910                         clocks = <&apb2_gates 1>;
911                         resets = <&apb2_rst 1>;
912                         status = "disabled";
913                         #address-cells = <1>;
914                         #size-cells = <0>;
915                 };
916
917                 i2c2: i2c@01c2b400 {
918                         compatible = "allwinner,sun6i-a31-i2c";
919                         reg = <0x01c2b400 0x400>;
920                         interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
921                         clocks = <&apb2_gates 2>;
922                         resets = <&apb2_rst 2>;
923                         status = "disabled";
924                         #address-cells = <1>;
925                         #size-cells = <0>;
926                 };
927
928                 i2c3: i2c@01c2b800 {
929                         compatible = "allwinner,sun6i-a31-i2c";
930                         reg = <0x01c2b800 0x400>;
931                         interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
932                         clocks = <&apb2_gates 3>;
933                         resets = <&apb2_rst 3>;
934                         status = "disabled";
935                         #address-cells = <1>;
936                         #size-cells = <0>;
937                 };
938
939                 gmac: ethernet@01c30000 {
940                         compatible = "allwinner,sun7i-a20-gmac";
941                         reg = <0x01c30000 0x1054>;
942                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
943                         interrupt-names = "macirq";
944                         clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
945                         clock-names = "stmmaceth", "allwinner_gmac_tx";
946                         resets = <&ahb1_rst 17>;
947                         reset-names = "stmmaceth";
948                         snps,pbl = <2>;
949                         snps,fixed-burst;
950                         snps,force_sf_dma_mode;
951                         status = "disabled";
952                         #address-cells = <1>;
953                         #size-cells = <0>;
954                 };
955
956                 crypto: crypto-engine@01c15000 {
957                         compatible = "allwinner,sun4i-a10-crypto";
958                         reg = <0x01c15000 0x1000>;
959                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
960                         clocks = <&ahb1_gates 5>, <&ss_clk>;
961                         clock-names = "ahb", "mod";
962                         resets = <&ahb1_rst 5>;
963                         reset-names = "ahb";
964                 };
965
966                 timer@01c60000 {
967                         compatible = "allwinner,sun6i-a31-hstimer",
968                                      "allwinner,sun7i-a20-hstimer";
969                         reg = <0x01c60000 0x1000>;
970                         interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
971                                      <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
972                                      <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
973                                      <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
974                         clocks = <&ahb1_gates 19>;
975                         resets = <&ahb1_rst 19>;
976                 };
977
978                 spi0: spi@01c68000 {
979                         compatible = "allwinner,sun6i-a31-spi";
980                         reg = <0x01c68000 0x1000>;
981                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
982                         clocks = <&ahb1_gates 20>, <&spi0_clk>;
983                         clock-names = "ahb", "mod";
984                         dmas = <&dma 23>, <&dma 23>;
985                         dma-names = "rx", "tx";
986                         resets = <&ahb1_rst 20>;
987                         status = "disabled";
988                 };
989
990                 spi1: spi@01c69000 {
991                         compatible = "allwinner,sun6i-a31-spi";
992                         reg = <0x01c69000 0x1000>;
993                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
994                         clocks = <&ahb1_gates 21>, <&spi1_clk>;
995                         clock-names = "ahb", "mod";
996                         dmas = <&dma 24>, <&dma 24>;
997                         dma-names = "rx", "tx";
998                         resets = <&ahb1_rst 21>;
999                         status = "disabled";
1000                 };
1001
1002                 spi2: spi@01c6a000 {
1003                         compatible = "allwinner,sun6i-a31-spi";
1004                         reg = <0x01c6a000 0x1000>;
1005                         interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
1006                         clocks = <&ahb1_gates 22>, <&spi2_clk>;
1007                         clock-names = "ahb", "mod";
1008                         dmas = <&dma 25>, <&dma 25>;
1009                         dma-names = "rx", "tx";
1010                         resets = <&ahb1_rst 22>;
1011                         status = "disabled";
1012                 };
1013
1014                 spi3: spi@01c6b000 {
1015                         compatible = "allwinner,sun6i-a31-spi";
1016                         reg = <0x01c6b000 0x1000>;
1017                         interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
1018                         clocks = <&ahb1_gates 23>, <&spi3_clk>;
1019                         clock-names = "ahb", "mod";
1020                         dmas = <&dma 26>, <&dma 26>;
1021                         dma-names = "rx", "tx";
1022                         resets = <&ahb1_rst 23>;
1023                         status = "disabled";
1024                 };
1025
1026                 gic: interrupt-controller@01c81000 {
1027                         compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
1028                         reg = <0x01c81000 0x1000>,
1029                               <0x01c82000 0x1000>,
1030                               <0x01c84000 0x2000>,
1031                               <0x01c86000 0x2000>;
1032                         interrupt-controller;
1033                         #interrupt-cells = <3>;
1034                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
1035                 };
1036
1037                 rtc: rtc@01f00000 {
1038                         compatible = "allwinner,sun6i-a31-rtc";
1039                         reg = <0x01f00000 0x54>;
1040                         interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
1041                                      <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1042                 };
1043
1044                 nmi_intc: interrupt-controller@01f00c0c {
1045                         compatible = "allwinner,sun6i-a31-sc-nmi";
1046                         interrupt-controller;
1047                         #interrupt-cells = <2>;
1048                         reg = <0x01f00c0c 0x38>;
1049                         interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
1050                 };
1051
1052                 prcm@01f01400 {
1053                         compatible = "allwinner,sun6i-a31-prcm";
1054                         reg = <0x01f01400 0x200>;
1055
1056                         ar100: ar100_clk {
1057                                 compatible = "allwinner,sun6i-a31-ar100-clk";
1058                                 #clock-cells = <0>;
1059                                 clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
1060                                          <&pll6 0>;
1061                                 clock-output-names = "ar100";
1062                         };
1063
1064                         ahb0: ahb0_clk {
1065                                 compatible = "fixed-factor-clock";
1066                                 #clock-cells = <0>;
1067                                 clock-div = <1>;
1068                                 clock-mult = <1>;
1069                                 clocks = <&ar100>;
1070                                 clock-output-names = "ahb0";
1071                         };
1072
1073                         apb0: apb0_clk {
1074                                 compatible = "allwinner,sun6i-a31-apb0-clk";
1075                                 #clock-cells = <0>;
1076                                 clocks = <&ahb0>;
1077                                 clock-output-names = "apb0";
1078                         };
1079
1080                         apb0_gates: apb0_gates_clk {
1081                                 compatible = "allwinner,sun6i-a31-apb0-gates-clk";
1082                                 #clock-cells = <1>;
1083                                 clocks = <&apb0>;
1084                                 clock-output-names = "apb0_pio", "apb0_ir",
1085                                                 "apb0_timer", "apb0_p2wi",
1086                                                 "apb0_uart", "apb0_1wire",
1087                                                 "apb0_i2c";
1088                         };
1089
1090                         ir_clk: ir_clk {
1091                                 #clock-cells = <0>;
1092                                 compatible = "allwinner,sun4i-a10-mod0-clk";
1093                                 clocks = <&osc32k>, <&osc24M>;
1094                                 clock-output-names = "ir";
1095                         };
1096
1097                         apb0_rst: apb0_rst {
1098                                 compatible = "allwinner,sun6i-a31-clock-reset";
1099                                 #reset-cells = <1>;
1100                         };
1101                 };
1102
1103                 cpucfg@01f01c00 {
1104                         compatible = "allwinner,sun6i-a31-cpuconfig";
1105                         reg = <0x01f01c00 0x300>;
1106                 };
1107
1108                 ir: ir@01f02000 {
1109                         compatible = "allwinner,sun5i-a13-ir";
1110                         clocks = <&apb0_gates 1>, <&ir_clk>;
1111                         clock-names = "apb", "ir";
1112                         resets = <&apb0_rst 1>;
1113                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
1114                         reg = <0x01f02000 0x40>;
1115                         status = "disabled";
1116                 };
1117
1118                 r_pio: pinctrl@01f02c00 {
1119                         compatible = "allwinner,sun6i-a31-r-pinctrl";
1120                         reg = <0x01f02c00 0x400>;
1121                         interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
1122                                      <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
1123                         clocks = <&apb0_gates 0>;
1124                         resets = <&apb0_rst 0>;
1125                         gpio-controller;
1126                         interrupt-controller;
1127                         #interrupt-cells = <3>;
1128                         #size-cells = <0>;
1129                         #gpio-cells = <3>;
1130
1131                         ir_pins_a: ir@0 {
1132                                 allwinner,pins = "PL4";
1133                                 allwinner,function = "s_ir";
1134                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
1135                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
1136                         };
1137
1138                         p2wi_pins: p2wi {
1139                                 allwinner,pins = "PL0", "PL1";
1140                                 allwinner,function = "s_p2wi";
1141                                 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
1142                                 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
1143                         };
1144                 };
1145
1146                 p2wi: i2c@01f03400 {
1147                         compatible = "allwinner,sun6i-a31-p2wi";
1148                         reg = <0x01f03400 0x400>;
1149                         interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
1150                         clocks = <&apb0_gates 3>;
1151                         clock-frequency = <100000>;
1152                         resets = <&apb0_rst 3>;
1153                         pinctrl-names = "default";
1154                         pinctrl-0 = <&p2wi_pins>;
1155                         status = "disabled";
1156                         #address-cells = <1>;
1157                         #size-cells = <0>;
1158                 };
1159         };
1160 };