arch/arm/dts/sun50i-h5-orangepi-pc2.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 // Copyright (C) 2016 ARM Ltd.
   3
   4 /dts-v1/;
   5 #include "sun50i-h5.dtsi"
   6
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/input/input.h>
   9 #include <dt-bindings/pinctrl/sun4i-a10.h>
  10
  11 / {
  12         model = "Xunlong Orange Pi PC 2";
  13         compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5";
  14
  15         reg_vcc3v3: vcc3v3 {
  16                 compatible = "regulator-fixed";
  17                 regulator-name = "vcc3v3";
  18                 regulator-min-microvolt = <3300000>;
  19                 regulator-max-microvolt = <3300000>;
  20         };
  21
  22         aliases {
  23                 ethernet0 = &emac;
  24                 serial0 = &uart0;
  25         };
  26
  27         chosen {
  28                 stdout-path = "serial0:115200n8";
  29         };
  30
  31         connector {
  32                 compatible = "hdmi-connector";
  33                 type = "a";
  34
  35                 port {
  36                         hdmi_con_in: endpoint {
  37                                 remote-endpoint = <&hdmi_out_con>;
  38                         };
  39                 };
  40         };
  41
  42         leds {
  43                 compatible = "gpio-leds";
  44
  45                 pwr {
  46                         label = "orangepi:green:pwr";
  47                         gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
  48                         default-state = "on";
  49                 };
  50
  51                 status {
  52                         label = "orangepi:red:status";
  53                         gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>;
  54                 };
  55         };
  56
  57         r-gpio-keys {
  58                 compatible = "gpio-keys";
  59
  60                 sw4 {
  61                         label = "sw4";
  62                         linux,code = <BTN_0>;
  63                         gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
  64                 };
  65         };
  66
  67         reg_gmac_3v3: gmac-3v3 {
  68                 compatible = "regulator-fixed";
  69                 regulator-name = "gmac-3v3";
  70                 regulator-min-microvolt = <3300000>;
  71                 regulator-max-microvolt = <3300000>;
  72                 startup-delay-us = <100000>;
  73                 enable-active-high;
  74                 gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
  75         };
  76
  77         reg_usb0_vbus: usb0-vbus {
  78                 compatible = "regulator-fixed";
  79                 regulator-name = "usb0-vbus";
  80                 regulator-min-microvolt = <5000000>;
  81                 regulator-max-microvolt = <5000000>;
  82                 enable-active-high;
  83                 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
  84                 status = "okay";
  85         };
  86 };
  87
  88 &codec {
  89         allwinner,audio-routing =
  90                 "Line Out", "LINEOUT",
  91                 "MIC1", "Mic",
  92                 "Mic",  "MBIAS";
  93         status = "okay";
  94 };
  95
  96 &de {
  97         status = "okay";
  98 };
  99
 100 &ehci0 {
 101         status = "okay";
 102 };
 103
 104 &ehci1 {
 105         status = "okay";
 106 };
 107
 108 &ehci2 {
 109         status = "okay";
 110 };
 111
 112 &ehci3 {
 113         status = "okay";
 114 };
 115
 116 &emac {
 117         pinctrl-names = "default";
 118         pinctrl-0 = <&emac_rgmii_pins>;
 119         phy-supply = <&reg_gmac_3v3>;
 120         phy-handle = <&ext_rgmii_phy>;
 121         phy-mode = "rgmii";
 122         status = "okay";
 123 };
 124
 125 &external_mdio {
 126         ext_rgmii_phy: ethernet-phy@1 {
 127                 compatible = "ethernet-phy-ieee802.3-c22";
 128                 reg = <1>;
 129         };
 130 };
 131
 132 &hdmi {
 133         status = "okay";
 134 };
 135
 136 &hdmi_out {
 137         hdmi_out_con: endpoint {
 138                 remote-endpoint = <&hdmi_con_in>;
 139         };
 140 };
 141
 142 &ir {
 143         pinctrl-names = "default";
 144         pinctrl-0 = <&r_ir_rx_pin>;
 145         status = "okay";
 146 };
 147
 148 &mmc0 {
 149         vmmc-supply = <&reg_vcc3v3>;
 150         bus-width = <4>;
 151         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
 152         status = "okay";
 153 };
 154
 155 &ohci0 {
 156         status = "okay";
 157 };
 158
 159 &ohci1 {
 160         status = "okay";
 161 };
 162
 163 &ohci2 {
 164         status = "okay";
 165 };
 166
 167 &ohci3 {
 168         status = "okay";
 169 };
 170
 171 &spi0  {
 172         status = "okay";
 173
 174         flash@0 {
 175                 #address-cells = <1>;
 176                 #size-cells = <1>;
 177                 compatible = "jedec,spi-nor";
 178                 reg = <0>;
 179                 spi-max-frequency = <40000000>;
 180         };
 181 };
 182
 183 &uart0 {
 184         pinctrl-names = "default";
 185         pinctrl-0 = <&uart0_pa_pins>;
 186         status = "okay";
 187 };
 188
 189 &uart1 {
 190         pinctrl-names = "default";
 191         pinctrl-0 = <&uart1_pins>;
 192         status = "disabled";
 193 };
 194
 195 &uart2 {
 196         pinctrl-names = "default";
 197         pinctrl-0 = <&uart2_pins>;
 198         status = "disabled";
 199 };
 200
 201 &usb_otg {
 202         dr_mode = "otg";
 203         status = "okay";
 204 };
 205
 206 &usbphy {
 207         /* USB Type-A ports' VBUS is always on */
 208         usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
 209         usb0_vbus-supply = <&reg_usb0_vbus>;
 210         status = "okay";
 211 };