2 * Copyright (c) 2016 ARM Ltd.
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
9 * a) This library is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
14 * This library is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
45 #include "sun50i-a64.dtsi"
47 #include <dt-bindings/gpio/gpio.h>
50 model = "BananaPi-M64";
51 compatible = "sinovoip,bananapi-m64", "allwinner,sun50i-a64";
60 stdout-path = "serial0:115200n8";
64 compatible = "hdmi-connector";
68 hdmi_con_in: endpoint {
69 remote-endpoint = <&hdmi_out_con>;
75 compatible = "gpio-leds";
78 label = "bananapi-m64:red:pwr";
79 gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
84 label = "bananapi-m64:green:user";
85 gpios = <&pio 4 14 GPIO_ACTIVE_HIGH>; /* PE14 */
89 label = "bananapi-m64:blue:user";
90 gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */
94 wifi_pwrseq: wifi_pwrseq {
95 compatible = "mmc-pwrseq-simple";
96 reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
113 pinctrl-names = "default";
114 pinctrl-0 = <&rgmii_pins>;
116 phy-handle = <&ext_rgmii_phy>;
117 phy-supply = <®_dc1sw>;
122 hvcc-supply = <®_dldo1>;
127 hdmi_out_con: endpoint {
128 remote-endpoint = <&hdmi_con_in>;
133 pinctrl-names = "default";
134 pinctrl-0 = <&i2c1_pins>;
143 ext_rgmii_phy: ethernet-phy@1 {
144 compatible = "ethernet-phy-ieee802.3-c22";
150 pinctrl-names = "default";
151 pinctrl-0 = <&mmc0_pins>;
152 vmmc-supply = <®_dcdc1>;
153 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
160 pinctrl-names = "default";
161 pinctrl-0 = <&mmc1_pins>;
162 vmmc-supply = <®_dldo2>;
163 vqmmc-supply = <®_dldo4>;
164 mmc-pwrseq = <&wifi_pwrseq>;
171 compatible = "brcm,bcm4329-fmac";
172 interrupt-parent = <&r_pio>;
173 interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */
174 interrupt-names = "host-wake";
179 pinctrl-names = "default";
180 pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>;
181 vmmc-supply = <®_dcdc1>;
200 compatible = "x-powers,axp803";
202 interrupt-parent = <&r_intc>;
203 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
204 x-powers,drive-vbus-en; /* set N_VBUSEN as output pin */
208 #include "axp803.dtsi"
212 * This regulator also drives the PE pingroup GPIOs,
213 * which also controls two LEDs.
216 regulator-min-microvolt = <2800000>;
217 regulator-max-microvolt = <2800000>;
218 regulator-name = "afvcc-csi";
223 regulator-min-microvolt = <1800000>;
224 regulator-max-microvolt = <3300000>;
225 regulator-name = "vcc-pl";
230 regulator-min-microvolt = <3000000>;
231 regulator-max-microvolt = <3000000>;
232 regulator-name = "vcc-pll-avcc";
237 * This regulator also indirectly drives the PD pingroup GPIOs,
238 * which also controls the power LED.
241 regulator-name = "vcc-phy";
246 regulator-min-microvolt = <3300000>;
247 regulator-max-microvolt = <3300000>;
248 regulator-name = "vcc-3v3";
253 regulator-min-microvolt = <1040000>;
254 regulator-max-microvolt = <1300000>;
255 regulator-name = "vdd-cpux";
258 /* DCDC3 is polyphased with DCDC2 */
262 regulator-min-microvolt = <1500000>;
263 regulator-max-microvolt = <1500000>;
264 regulator-name = "vcc-dram";
269 regulator-min-microvolt = <1100000>;
270 regulator-max-microvolt = <1100000>;
271 regulator-name = "vdd-sys";
275 regulator-min-microvolt = <3300000>;
276 regulator-max-microvolt = <3300000>;
277 regulator-name = "vcc-hdmi-dsi";
281 regulator-min-microvolt = <3300000>;
282 regulator-max-microvolt = <3300000>;
283 regulator-name = "vcc-wifi";
287 regulator-min-microvolt = <1800000>;
288 regulator-max-microvolt = <3300000>;
289 regulator-name = "vcc-wifi-io";
293 regulator-name = "usb0-vbus";
298 regulator-min-microvolt = <1800000>;
299 regulator-max-microvolt = <1800000>;
300 regulator-name = "cpvdd";
304 regulator-min-microvolt = <1200000>;
305 regulator-max-microvolt = <1200000>;
306 regulator-name = "vcc-1v2-hsic";
310 * The A64 chip cannot work without this regulator off, although
311 * it seems to be only driving the AR100 core.
312 * Maybe we don't still know well about CPUs domain.
316 regulator-min-microvolt = <1100000>;
317 regulator-max-microvolt = <1100000>;
318 regulator-name = "vdd-cpus";
322 regulator-name = "vcc-rtc";
326 vcc-hdmi-supply = <®_dldo1>;
330 pinctrl-names = "default";
331 pinctrl-0 = <&uart0_pb_pins>;
336 pinctrl-names = "default";
337 pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
347 usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
348 usb0_vbus-supply = <®_drivevbus>;