arch/arm/dts/stm32mp157c-ev1.dts

   1 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
   2 /*
   3  * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
   4  * Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
   5  */
   6 /dts-v1/;
   7
   8 #include "stm32mp157c-ed1.dts"
   9
  10 / {
  11         model = "STMicroelectronics STM32MP157C eval daughter on eval mother";
  12         compatible = "st,stm32mp157c-ev1", "st,stm32mp157c-ed1", "st,stm32mp157";
  13
  14 };
  15
  16 &cec {
  17         pinctrl-names = "default";
  18         pinctrl-0 = <&cec_pins_a>;
  19         status = "okay";
  20 };
  21
  22 &i2c2 {
  23         pinctrl-names = "default";
  24         pinctrl-0 = <&i2c2_pins_a>;
  25         i2c-scl-rising-time-ns = <185>;
  26         i2c-scl-falling-time-ns = <20>;
  27         status = "okay";
  28 };
  29
  30 &i2c5 {
  31         pinctrl-names = "default";
  32         pinctrl-0 = <&i2c5_pins_a>;
  33         i2c-scl-rising-time-ns = <185>;
  34         i2c-scl-falling-time-ns = <20>;
  35         status = "okay";
  36 };
  37
  38 &qspi {
  39         pinctrl-names = "default";
  40         pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a &qspi_bk2_pins_a>;
  41         reg = <0x58003000 0x1000>, <0x70000000 0x4000000>;
  42         #address-cells = <1>;
  43         #size-cells = <0>;
  44         status = "okay";
  45
  46         flash0: mx66l51235l@0 {
  47                 reg = <0>;
  48                 spi-rx-bus-width = <4>;
  49                 spi-max-frequency = <108000000>;
  50                 #address-cells = <1>;
  51                 #size-cells = <1>;
  52         };
  53
  54         flash1: mx66l51235l@1 {
  55                 reg = <1>;
  56                 spi-rx-bus-width = <4>;
  57                 spi-max-frequency = <108000000>;
  58                 #address-cells = <1>;
  59                 #size-cells = <1>;
  60         };
  61 };
  62
  63 &timers2 {
  64         status = "disabled";
  65         pwm {
  66                 pinctrl-0 = <&pwm2_pins_a>;
  67                 pinctrl-names = "default";
  68                 status = "okay";
  69         };
  70         timer@1 {
  71                 status = "okay";
  72         };
  73 };
  74
  75 &timers8 {
  76         status = "disabled";
  77         pwm {
  78                 pinctrl-0 = <&pwm8_pins_a>;
  79                 pinctrl-names = "default";
  80                 status = "okay";
  81         };
  82         timer@7 {
  83                 status = "okay";
  84         };
  85 };
  86
  87 &timers12 {
  88         status = "disabled";
  89         pwm {
  90                 pinctrl-0 = <&pwm12_pins_a>;
  91                 pinctrl-names = "default";
  92                 status = "okay";
  93         };
  94         timer@11 {
  95                 status = "okay";
  96         };
  97 };
  98
  99 &usbh_ehci {
 100         phys = <&usbphyc_port0>;
 101         phy-names = "usb";
 102         vbus-supply = <&vbus_sw>;
 103         status = "okay";
 104 };
 105
 106 &usbotg_hs {
 107         pinctrl-names = "default";
 108         pinctrl-0 = <&usbotg_hs_pins_a>;
 109         phys = <&usbphyc_port1 0>;
 110         phy-names = "usb2-phy";
 111         status = "okay";
 112 };
 113
 114 &usbphyc {
 115         status = "okay";
 116 };