Merge branch 'master' of git://git.denx.de/u-boot-spi
[oweals/u-boot.git] / arch / arm / dts / stm32mp157c-ed1-u-boot.dtsi
1 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
2 /*
3  * Copyright : STMicroelectronics 2018
4  */
5
6 #include <dt-bindings/clock/stm32mp1-clksrc.h>
7 #include "stm32mp157-u-boot.dtsi"
8 #include "stm32mp15-ddr3-2x4Gb-1066-binG.dtsi"
9
10 / {
11         aliases {
12                 i2c3 = &i2c4;
13                 mmc0 = &sdmmc1;
14                 mmc1 = &sdmmc2;
15         };
16
17         config {
18                 st,fastboot-gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
19                 st,stm32prog-gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
20         };
21
22         led {
23                 compatible = "gpio-leds";
24
25                 red {
26                         label = "stm32mp:red:status";
27                         gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
28                         default-state = "off";
29                 };
30                 green {
31                         label = "stm32mp:green:user";
32                         gpios = <&gpioa 14 GPIO_ACTIVE_LOW>;
33                         default-state = "on";
34                 };
35                 orange {
36                         label = "stm32mp:orange:status";
37                         gpios = <&gpioh 7 GPIO_ACTIVE_HIGH>;
38                         default-state = "off";
39                 };
40                 blue {
41                         label = "stm32mp:blue:user";
42                         gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
43                 };
44         };
45 };
46
47 &clk_hse {
48         st,digbypass;
49 };
50
51 &i2c4 {
52         u-boot,dm-pre-reloc;
53 };
54
55 &i2c4_pins_a {
56         u-boot,dm-pre-reloc;
57         pins {
58                 u-boot,dm-pre-reloc;
59         };
60 };
61
62 &pmic {
63         u-boot,dm-pre-reloc;
64 };
65
66 &rcc {
67         st,clksrc = <
68                 CLK_MPU_PLL1P
69                 CLK_AXI_PLL2P
70                 CLK_MCU_PLL3P
71                 CLK_PLL12_HSE
72                 CLK_PLL3_HSE
73                 CLK_PLL4_HSE
74                 CLK_RTC_LSE
75                 CLK_MCO1_DISABLED
76                 CLK_MCO2_DISABLED
77         >;
78
79         st,clkdiv = <
80                 1 /*MPU*/
81                 0 /*AXI*/
82                 0 /*MCU*/
83                 1 /*APB1*/
84                 1 /*APB2*/
85                 1 /*APB3*/
86                 1 /*APB4*/
87                 2 /*APB5*/
88                 23 /*RTC*/
89                 0 /*MCO1*/
90                 0 /*MCO2*/
91         >;
92
93         st,pkcs = <
94                 CLK_CKPER_HSE
95                 CLK_FMC_ACLK
96                 CLK_QSPI_ACLK
97                 CLK_ETH_DISABLED
98                 CLK_SDMMC12_PLL4P
99                 CLK_DSI_DSIPLL
100                 CLK_STGEN_HSE
101                 CLK_USBPHY_HSE
102                 CLK_SPI2S1_PLL3Q
103                 CLK_SPI2S23_PLL3Q
104                 CLK_SPI45_HSI
105                 CLK_SPI6_HSI
106                 CLK_I2C46_HSI
107                 CLK_SDMMC3_PLL4P
108                 CLK_USBO_USBPHY
109                 CLK_ADC_CKPER
110                 CLK_CEC_LSE
111                 CLK_I2C12_HSI
112                 CLK_I2C35_HSI
113                 CLK_UART1_HSI
114                 CLK_UART24_HSI
115                 CLK_UART35_HSI
116                 CLK_UART6_HSI
117                 CLK_UART78_HSI
118                 CLK_SPDIF_PLL4P
119                 CLK_FDCAN_PLL4Q
120                 CLK_SAI1_PLL3Q
121                 CLK_SAI2_PLL3Q
122                 CLK_SAI3_PLL3Q
123                 CLK_SAI4_PLL3Q
124                 CLK_RNG1_LSI
125                 CLK_RNG2_LSI
126                 CLK_LPTIM1_PCLK1
127                 CLK_LPTIM23_PCLK3
128                 CLK_LPTIM45_LSE
129         >;
130
131         /* VCO = 1300.0 MHz => P = 650 (CPU) */
132         pll1: st,pll@0 {
133                 cfg = < 2 80 0 0 0 PQR(1,0,0) >;
134                 frac = < 0x800 >;
135                 u-boot,dm-pre-reloc;
136         };
137
138         /* VCO = 1066.0 MHz => P = 266 (AXI), Q = 533 (GPU), R = 533 (DDR) */
139         pll2: st,pll@1 {
140                 cfg = < 2 65 1 0 0 PQR(1,1,1) >;
141                 frac = < 0x1400 >;
142                 u-boot,dm-pre-reloc;
143         };
144
145         /* VCO = 417.8 MHz => P = 209, Q = 24, R = 11 */
146         pll3: st,pll@2 {
147                 cfg = < 1 33 1 16 36 PQR(1,1,1) >;
148                 frac = < 0x1a04 >;
149                 u-boot,dm-pre-reloc;
150         };
151
152         /* VCO = 594.0 MHz => P = 99, Q = 74, R = 74 */
153         pll4: st,pll@3 {
154                 cfg = < 3 98 5 7 7 PQR(1,1,1) >;
155                 u-boot,dm-pre-reloc;
156         };
157 };
158
159 &sdmmc1_b4_pins_a {
160         u-boot,dm-spl;
161         pins {
162                 u-boot,dm-spl;
163         };
164 };
165
166 &sdmmc1_dir_pins_a {
167         u-boot,dm-spl;
168         pins {
169                 u-boot,dm-spl;
170         };
171 };
172
173 &sdmmc1 {
174         u-boot,dm-spl;
175 };
176
177 &sdmmc2_b4_pins_a {
178         u-boot,dm-spl;
179         pins {
180                 u-boot,dm-spl;
181         };
182 };
183
184 &sdmmc2_d47_pins_a {
185         u-boot,dm-spl;
186         pins {
187                 u-boot,dm-spl;
188         };
189 };
190
191 &sdmmc2 {
192         u-boot,dm-spl;
193 };
194
195 &uart4 {
196         u-boot,dm-pre-reloc;
197 };
198
199 &uart4_pins_a {
200         u-boot,dm-pre-reloc;
201         pins1 {
202                 u-boot,dm-pre-reloc;
203         };
204         pins2 {
205                 u-boot,dm-pre-reloc;
206         };
207 };