arm64: zynqmp: Add support for zcu102 1.0 rev
[oweals/u-boot.git] / arch / arm / dts / rv1108-evb.dts
1 /*
2  * (C) Copyright 2016 Rockchip Electronics Co., Ltd
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 /dts-v1/;
8
9 #include "rv1108.dtsi"
10
11 / {
12         model = "Rockchip RV1108 Evaluation board";
13         compatible = "rockchip,rv1108-evb", "rockchip,rv1108";
14
15         memory@60000000 {
16                 device_type = "memory";
17                 reg = <0x60000000 0x08000000>;
18         };
19
20         chosen {
21                 stdout-path = "serial2:1500000n8";
22         };
23
24         vcc5v0_otg: vcc5v0-otg-drv {
25                 compatible = "regulator-fixed";
26                 enable-active-high;
27                 regulator-name = "vcc5v0_otg";
28                 gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
29                 regulator-min-microvolt = <5000000>;
30                 regulator-max-microvolt = <5000000>;
31         };
32 };
33
34 &gmac {
35         status = "okay";
36         clock_in_out = <0>;
37         snps,reset-active-low;
38         snps,reset-delays-us = <0 10000 1000000>;
39         snps,reset-gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_LOW>;
40 };
41
42 &saradc {
43         status = "okay";
44 };
45
46 &sfc {
47         status = "okay";
48         flash@0 {
49                 compatible = "gd25q256","spi-flash";
50                 reg = <0>;
51                 spi-tx-bus-width = <1>;
52                 spi-rx-bus-width = <1>;
53                 spi-max-frequency = <96000000>;
54         };
55 };
56
57 &uart0 {
58         status = "okay";
59 };
60
61 &uart1 {
62         status = "okay";
63 };
64
65 &uart2 {
66         status = "okay";
67 };
68
69 &usb20_otg {
70         vbus-supply = <&vcc5v0_otg>;
71         status = "okay";
72 };
73
74 &usb_host_ehci {
75         status = "okay";
76 };
77
78 &usb_host_ohci {
79         status = "okay";
80 };